Sharp LC-60LE636E (serv.man6) Service Manual ▷ View online
LC-60LE635E/636E/638E (1st Edition)
4 – 9
State where the main PWB and shielded case are assembled
The following is a drawing mounting the main PWB Ass’y on the backlight chassis. (The parts indicated by -> are the access holes for confirmation.)
(Main PWB Ass’y => State where the shielded case and RF terminal angle are mounted on the main PWB)
Access hole
Access hole
LC-60LE635E/636E/638E (1st Edition)
4 – 10
[4] The way of detaching Rear Cabinet
• Here are the way of detaching Rear Cabinet. Please respond in following order.
1. Lay the TV set down on the desk or table with the glass side down, set the left hand between Front Cabinet and Rear Cabinet on the bottom of
right corner side.
2. Set the right hand between Front Cabinet and Rear Cabinet on the right side in the under corner.
LC-60LE635E/636E/638E (1st Edition)
4 – 11
3. Push Rear Cabinet toward the center of TV set with right hand. At the same time, open Rear Cabinet in the back side with left hand and detach the
hook.
4. Detach the hooks one by one in a counterclockwise direction with changing the position of right hand.
Right Hand
Left Hand
Figure for image
Start Position
Follow the arrows for removing
LC-60LE635E/636E/638E (1st Edition)
4 – 11
3. Push Rear Cabinet toward the center of TV set with right hand. At the same time, open Rear Cabinet in the back side with left hand and detach the
hook.
4. Detach the hooks one by one in a counterclockwise direction with changing the position of right hand.
Right Hand
Left Hand
Figure for image
Start Position
Follow the arrows for removing
