Sharp LC-52XL2E (serv.man10) User Manual / Operation Manual ▷ View online
Menu operation
What is the Menu?
• You need to bring up the On-Screen Display to perform settings for the TV. The On-Screen Display for the settings is called
“Menu”.
• The Menu enables various settings and adjustments.
• The Menu can be operated with the remote control unit.
• The Menu can be operated with the remote control unit.
Common operations
1
MENU
[Picture]
Picture
Audio
Contrast
OPC
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight
[+14]
–16
+16
DYNAMIC
MENU
[Power Control
...
No Operation Off]
Power Control
Setup
No Signal Off
No Operation Off
Ecology
Sleep Timer
[Disable]
[Disable]
Analogue Search
Digital Search
Display the Menu
Screen
Press MENU and the MENU screen
displays.
displays.
3
Exit the Menu
screen
The operation will exit the menu
screen if you press END before it is
completed.
screen if you press END before it is
completed.
2
Select an item
Press
a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
the desired level, and then press OK.
Press
6 to return to the previous
Menu page.
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
operations with an On-Screen Display.
The bar above is an operational guide for the remote control.
The bar will change in accordance with each menu setting
screen.
The bar will change in accordance with each menu setting
screen.
OK
: Select
: Enter
MENU
: End
6
: Back
E
Selecting in the Menu
E
Selecting options
Operation without a remote control
This function is useful when there is
no remote control within your
reach.
no remote control within your
reach.
Press MENU briefly to display
the direct control screen.
the direct control screen.
Press P
r/s instead of
a/b or i k/l
instead of
c/d to select the item.
Press
b to complete the setting.
NOTE
• The direct control menu screen will disappear if left
• The direct control menu screen will disappear if left
unattended for several seconds.
1
2
3
NOTE
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly
from the actual screens.
• Items with
4 cannot be selected for various reasons.
23
LC-42XL2E-gb.indd 23
LC-42XL2E-gb.indd 23
2007/09/04 15:57:28
2007/09/04 15:57:28
100Hz
100Hz technology provides superior solutions for digital
display picture quality removing motion blur.
display picture quality removing motion blur.
NOTE
• Press DEMO on the remote control unit to show 100Hz
• Press DEMO on the remote control unit to show 100Hz
demonstration in a dual screen format.
• This effect is greater on fast moving images.
• 100 Hz will have no effect in the following cases;
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set the “Film Mode” to “Off”.
• 100 Hz will have no effect in the following cases;
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set the “Film Mode” to “Off”.
Film Mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it and then recreates each
still film frame for high-definition picture quality.
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it and then recreates each
still film frame for high-definition picture quality.
Active Contrast
Automatically adjusts the contrast of an image
according to the scene.
according to the scene.
3D-Y/C
Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
cross colour noise by detecting changes in the image.
Picture Settings
Basic adjustment
Item
Off:
The brightness is fixed at the value set in Backlight.
On:
Automatically adjusts
On:Display:
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
Automatically adjust the brightness of the screen.
NOTE
• When set to “On”, the TV senses the surrounding light and
• When set to “On”, the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure
no object obstructs the OPC sensor, which could affect its
ability to sense surrounding light.
no object obstructs the OPC sensor, which could affect its
ability to sense surrounding light.
Item
High:
White with bluish tone
Mid-High:
Intermediate tone between High and Middle
Middle:
Natural tone
Mid-Low:
Intermediate tone between Middle and Low
Low:
White with reddish tone
This TV provides various advanced functions for
optimising the picture quality.
optimising the picture quality.
Colour Temp.
100Hz
Film Mode
Active Contrast
3D-Y/C
Monochrome
Range of OPC
High
Mid-High
Middle
Mid-Low
Low
Colour Temp.
Adjust the colour temperature to give the best white
image.
image.
Item
Standard:
Normal adjustment
Fast:
Set the optimum image quality for fast-moving images.
Slow:
Set the optimum image quality for slow-moving images.
Off:
No detecting
NOTE
• 3D-Y/C may not operate depending on the input signal
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
• 3D-Y/C has even more effect on composite video signals
(CVBS).
MENU
[Picture]
Picture
Audio
Contrast
OPC [Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight [+14]
–16
+16
DYNAMIC
Adjust the picture to your preference with the following
picture settings.
picture settings.
Adjustment items
Selectable
items
c button
d button
Backlight
The screen dims
The screen brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour intensity
For more colour
intensity
intensity
Tint
Skin tones become
purplish
purplish
Skin tones become
greenish
greenish
Sharpness
For less sharpness
For more sharpness
OPC
Picture
Picture adjustments
Picture
Advanced
Picture
24
LC-42XL2E-gb.indd 24
LC-42XL2E-gb.indd 24
2007/09/04 15:57:29
2007/09/04 15:57:29
Monochrome
For viewing a video in monochrome.
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of
k16 and a minimum of
l16.
Selectable
items
Description
Max.
l16 through k16
Min.
l16 through k16
NOTE
• This function is available only when the “OPC” setting is set
• This function is available only when the “OPC” setting is set
to “On” or “On: Display”.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Audio Settings
You can adjust the sound quality to your preference
with the following settings.
with the following settings.
Selectable
items
c button
d button
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
the right speaker
Decrease audio from
the left speaker
the left speaker
MENU
[Audio]
Audio
Power Control
Balance
Treble
Surround
Reset
[ 0]
[ 0]
–15
L
+15
R
[Off]
Bass
[ 0]
–15
+15
DYNAMIC
This function allows you to enjoy realistic “live” sound.
Power Save Settings
MENU
[Power Control]
Power Control
Setup
No Signal Off
No Operation Off
Ecology
Sleep Timer
[Disable]
[Disable]
When set to “Enable” the TV will automatically enter the
standby mode if there is no signal input for 15 minutes.
standby mode if there is no signal input for 15 minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
• When a TV programme finishes, this function may not
• When a TV programme finishes, this function may not
operate.
Audio adjustment
Audio
Surround
Audio
No Signal Off
Power Control
Basic adjustment
AV Mode
AV Mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
Press AV MODE.
Each time you press AV MODE, the mode
changes.
changes.
• You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing AV MODE.
1
2
2
Item
STANDARD:
For a highly defined image in a normally
bright room.
MOVIE:
For viewing a movie in a darkened room.
GAME:
For playing of video games.
PC*:
For PC.
xvYCC**:
Produce realistic colour on the TV screen unlike
any other signal.
USER:
Allows the user to customise settings as desired.
You can set the mode for each input source.
DYNAMIC (Fixed):
For a clear-cut image emphasising
high contrast for sports viewing. (The Picture and Audio
settings cannot be adjusted.) Each setting value cannot
be changed in this mode.
settings cannot be adjusted.) Each setting value cannot
be changed in this mode.
DYNAMIC:
For a clear-cut image emphasising high
contrast for sports viewing.
NOTE
• The item marked with * is available only when selecting
• The item marked with * is available only when selecting
“EXT4”, “EXT5”, “EXT6” or EXT7” from the INPUT SOURCE
menu.
menu.
• The item marked with ** is available only when accepting
an xvYCC signal through an HDMI terminal.
25
LC-42XL2E-gb.indd 25
LC-42XL2E-gb.indd 25
2007/09/04 15:57:29
2007/09/04 15:57:29
The TV will automatically enter the standby mode if no
operations are performed during the time span you set
(“30min.” or “3hr.”).
operations are performed during the time span you set
(“30min.” or “3hr.”).
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
When set to “Yes” the TV activates the following power
saving mode.
saving mode.
• OPC set to “On” (Page 24)
• Standby Mode set to “Mode 2” (Page 32)
• No Signal Off set to “Enable” (Page 25)
• No Operation Off set to “3hr.” (Page 26)
• Standby Mode set to “Mode 2” (Page 32)
• No Signal Off set to “Enable” (Page 25)
• No Operation Off set to “3hr.” (Page 26)
Allows you to set a time when the TV automatically
switches to standby.
switches to standby.
NOTE
• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically
• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
No Operation Off
Power Control
Ecology
Power Control
Sleep Timer
Power Control
Basic adjustment
Channel Settings
Auto Installation
Auto Installation
Setup
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for “Digital” and “Analogue”
individually and reconfigure the settings after the initial
auto installation has been completed.
services in your area. This function also allows you to
perform the channel setting for “Digital” and “Analogue”
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting “Yes” on the screen, you can set
language and channel search the same as in the
initial auto installation. Follow steps 2, 4 and 5
on page 9.
language and channel search the same as in the
initial auto installation. Follow steps 2, 4 and 5
on page 9.
NOTE
• You cannot set the country setting in “Auto Installation”
• You cannot set the country setting in “Auto Installation”
in the Setup menu. If you want to reconfigure the country
setting, automatically execute initial auto installation after
executing “Reset” from the Setup menu.
setting, automatically execute initial auto installation after
executing “Reset” from the Setup menu.
• The current country setting is displayed on the screen.
1
Digital channel settings
Programme Setup
Setup
Digital Setting
You can reconfigure DTV services settings
automatically or manually.
automatically or manually.
E
Additional Search
Use this menu to add new services automatically after
auto installation has been completed.
auto installation has been completed.
E
Manual Search
Add new services within a specified frequency band.
• Enter the frequency using 0 - 9 numeric buttons.
E
Manual Adjust
Configure various settings for each service using the
Colour (R, G, Y, B)
Colour (R, G, Y, B)
buttons.
MENU
[Setup ... Programme Setup ... Digital Setting ... Manual Adjust]
DTV 993
Service
No.
Old
LCN
EPG
Skip
Skip
CH
Skip
Lock
Service
Name
Name
SIT 3
DTV 994
✔ ✔
SIT 2
DTV 995
✔
SIT 1
DTV 996 Monosco
576-2
DTV 997 Monosco
576-1
DTV
998
Color Bar 576i
DTV 999 HD
Monosco
: Lock
R
: CH Skip
G
: EPG Skip
Y
: Sort
B
Press
a/b to select the desired service.
Press the colour button on the remote control
corresponding with the item you want to
reconfigure.
corresponding with the item you want to
reconfigure.
• The
✔ mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
corresponding operation on/off.
1
2
2
Buttons for Manual Adjust operation
Lock: Press R button
.
When the service is locked, you must enter your PIN
whenever you tune to the service.
whenever you tune to the service.
CH Skip: Press G button
.
Services with a
✔ mark are passed over when
pressing P
r/s in the TV/remote control unit.
EPG Skip: Press Y button
.
Services with a
✔ mark are passed over in the
Electronic Programme Guide (EPG).
Sort: Press B button
.
The item position of services can be sorted.
1 Press a/b to select the service whose item
position you want to move, and then press OK.
DTV 994
✔ ✔
SIT 2
DTV 995
✔
SIT 1
2 Press a/b to move it to the desired position,
and then press OK.
DTV
994
✔
✔
SIT 1
DTV
995
✔
SIT 2
3 Repeat steps 1 and 2 until all desired service
items are sorted.
26
LC-42XL2E-gb.indd 26
LC-42XL2E-gb.indd 26
2007/09/04 15:57:30
2007/09/04 15:57:30
Click on the first or last page to see other LC-52XL2E (serv.man10) service manuals if exist.