Sharp LC-52XL2E (serv.man10) User Manual / Operation Manual ▷ View online
Introduction
1
4
5
6
7
8
7
8
9
10
11
12
13
14
15
16
17
16
17
18
19
19
20
21
22
2
3
1 TV
B (TV Standby/On) (Page 10)
2 LIGHT
D 8 9 0
When pressed, buttons that are frequently
used (P
used (P
r/s, i
k/l, 0 - 9 numeric
buttons,
A and b) will light. The lighting
will turn off if no operations are performed
within about 5 seconds. This button is
used for performing operations in low-light
situations.
within about 5 seconds. This button is
used for performing operations in low-light
situations.
3 FUNCTION
8 9 0
Press this button briefly (for more than 0.2
second), and the remote control switches
for DVD, SetTopBox or VCR operation
and currently controlled devices will be
indicated in the LCD window.
second), and the remote control switches
for DVD, SetTopBox or VCR operation
and currently controlled devices will be
indicated in the LCD window.
See page 38 for how to use this unit as a
universal remote control.
universal remote control.
4 LCD
window
8 9 0
This screen shows which device you are
currently controlling. (TV, DVD, STB or
VCR)
currently controlling. (TV, DVD, STB or
VCR)
5
0 - 9 numeric buttons
9
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
6
A (Flashback)
Press to return to the previous image in
normal viewing mode.
normal viewing mode.
7 ATV
Press to access conventional analogue TV
mode.
mode.
8 DTV
Press to access DTV mode.
9
i (
k/l) (Volume)
Increase/decrease TV volume.
10
e (Mute)
TV sound on/off.
11 R/G/Y/B (Colour) buttons
On the menu screen, the coloured buttons
are correspondingly used to select the
coloured items on the screen. (e.g. EPG,
MHEG-5, TELETEXT)
are correspondingly used to select the
coloured items on the screen. (e.g. EPG,
MHEG-5, TELETEXT)
12
a/b/c/d (Cursor) 8
Select a desired item on the setting
screen.
screen.
OK
8 9
ATV/DTV/DVD/STB: Execute a command
within the menu screen.
within the menu screen.
ATV/DTV: Display the programme list
when no other menu screen is running.
when no other menu screen is running.
13 END
Exit the menu screen.
15
b (INPUT SOURCE)
Select an input source. (TV, EXT1, EXT2,
EXT3, EXT4, EXT5, EXT6, EXT7, EXT8)
(Page 10)
EXT3, EXT4, EXT5, EXT6, EXT7, EXT8)
(Page 10)
16 RADIO
DTV: Switch between Radio and Data
mode.
mode.
• When only data broadcasting (no radio
broadcasting) is transmitted by DVB,
the radio broadcasting will be skipped.
the radio broadcasting will be skipped.
17 EPG
DTV: Display the EPG screen.
(Pages 11 - 13)
(Pages 11 - 13)
18 P (
r/s) 8 9 0
Select the TV channel.
In analogue TV mode, external sources
can also be selected.
can also be selected.
19 MENU
8
ATV/DTV: Menu screen on/off.
DVD: Title menu on/off.
20
6 (Return)
Return to the previous menu screen.
21 Buttons for other useful features
Flip open the remote control cover on the
front.
front.
p (Display information)
Press to display the station information
(channel number, signal, etc.) in the upper
right corner of the screen. (Page 31)
(channel number, signal, etc.) in the upper
right corner of the screen. (Page 31)
P.
INFO
Press to display programme information
which is transmitted through digital video
broadcasting in the upper left corner of
the screen. (DTV only)
which is transmitted through digital video
broadcasting in the upper left corner of
the screen. (DTV only)
7 (Sound mode)
Select the sound multiplex mode. (Page 10)
AV
MODE
Select a video setting. (Page 25)
DEMO
Demonstrate the 100 Hz effects in a dual
screen format. (Page 24)
screen format. (Page 24)
f (WIDE MODE)
Select the wide mode. (Pages 29 and 33)
22 AQUOS LINK buttons
8 9 0
TV mode: If external equipment such as a
AQUOS BD Player is connected via HDMI
cables and is AQUOS LINK compatible,
you can use these AQUOS LINK buttons.
See pages 20 and 22 for details.
AQUOS BD Player is connected via HDMI
cables and is AQUOS LINK compatible,
you can use these AQUOS LINK buttons.
See pages 20 and 22 for details.
DVD/VCR mode: Press OPTION to pause
the picture.
the picture.
• The buttons except OPTION are
correspondingly used to select the
items on the screen.
items on the screen.
STB mode: Only the
B button can be
used to operate on STB.
14 Buttons for useful operations
1 (Subpage) (Page14)
m (Teletext)
ATV: Display analogue teletext. (Page 14)
DTV: Select MHEG-5 and teletext for DTV.
(Page 14)
(Page 14)
3 (Freeze/Hold)
Press to freeze a moving image on the
screen.
screen.
TELETEXT: Stop updating Teletext pages
automatically or release the hold mode.
automatically or release the hold mode.
k (Reveal hidden Teletext) (Page 14)
[ (Subtitle)
ATV/DTV/External: Switch subtitle
languages on/off. (Pages 14 and 28)
languages on/off. (Pages 14 and 28)
v (Top/Bottom/Full)
Set the area of magnification in teletext
mode. (Page 14)
mode. (Page 14)
Remote control unit
NOTE
• The symbols
• The symbols
8, 9 and 0 indicate that the buttons become available in respective operating mode when using
as a universal remote control.
3
LC-42XL2E-gb.indd 3
LC-42XL2E-gb.indd 3
2007/09/04 15:57:23
2007/09/04 15:57:23
Introduction
2
3
4
12
13
16
6
7 8
9 10
11
1
15
14
5
1
AC INPUT terminal
2
EXT 3 terminals
3
EXT 4 (HDMI) terminal
4
Headphones
5
SERVICE
socket
6
EXT 1 (RGB) terminal
7
EXT 2 (RGB) terminal
8
EXT 8 (COMPONENT/AUDIO) terminals
9
Antenna
terminal
10
OUTPUT (AUDIO) terminals
11
DIGITAL AUDIO OUTPUT terminal
12
COMMON INTERFACE slot
13
RS-232C terminal
14
EXT 5 (HDMI) terminal
15
EXT 6 (HDMI/AUDIO) terminals
16
EXT 7 (ANALOGUE RGB/AUDIO) terminals
TV (Front view)
TV (Rear view)
4
Remote control sensor
OPC sensor
OPC indicator
SLEEP indicator
B (Standby/On)
indicator
indicator
MENU
button
a (Power) button
i (
k/l)
Volume buttons
P
(
r/s)
Programme [channel]
buttons
buttons
b (INPUT SOURCE)
button
Blue illumination LED indicator
LC-42XL2E-gb.indd 4
LC-42XL2E-gb.indd 4
2007/09/04 15:57:23
2007/09/04 15:57:23
Preparation
Supplied accessories
Attaching the stand unit
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Insert the stand into the openings on the
bottom of the TV. (Hold the stand so it will
not drop from the edge of the base area.)
2 Insert and tighten the 4 short screws into the
4 holes on the rear of the TV.
3
Confirm that there are 8 screws (4 short screws
and 4 long screws) with the stand unit.
and 4 long screws) with the stand unit.
1
Attach the supporting post for the stand unit
onto the base using the 4 long screws with the
hex key (supplied) as shown.
onto the base using the 4 long screws with the
hex key (supplied) as shown.
2
NOTE
• To detach the stand unit, perform the steps in reverse
• To detach the stand unit, perform the steps in reverse
order.
5
Remote control unit
(
g1)
AC cord
Stand unit (
g1)
Cable clamp (
g1)
Pages 3 and 6
Page 5
Page 8
Page 8
• Operation manual (This publication)
• “AAA” size alkaline battery (
g2) ... Page 6
(For Europe, except
U.K. and Eire)
(For U.K. and Eire)
U.K. type 3-pin AC cord is only included with
models LC-42XL2E, LC-46XL2E and LC-52XL2E.
Hex key
Short
screw
screw
Long
screw
screw
Hex key
Soft
cushion
cushion
LC-42XL2E-gb.indd 5
LC-42XL2E-gb.indd 5
2007/09/04 15:57:23
2007/09/04 15:57:23
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” alkaline size batteries.
• Place batteries with their terminals corresponding
to the (
k) and (l) indications in the battery
compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• When replacing the batteries, use alkaline batteries instead of manganese ones.
• Do not overuse the light-up function of the LIGHT
• Do not overuse the light-up function of the LIGHT
D button, doing so may shorten the battery life. Replace the batteries
when the light on the LCD window or the light-up function becomes weak or when the window becomes blurry.
• Do not continue to use the remote control unit with the batteries running low. This may result in error
message or malfunction. Should this happen replace the batteries and leave it unused for a while.
Otherwise, you may open the rear battery cover and press the RESET button. When you press the
RESET
Otherwise, you may open the rear battery cover and press the RESET button. When you press the
RESET
button, your Universal remote control settings will be deleted.
• The remote control unit has a internal memory of external devices. In order not to lose the data,
replace the batteries quickly. If the manufacturer code is initialised and lost, you can input the
manufacturer code again. (See page 38 - 41.)
manufacturer code again. (See page 38 - 41.)
• The batteries supplied with this product may have a shorter life expectancy due to storage
conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
1
2
2
3
Using the remote control unit
Use the remote control unit by pointing it
towards the remote control sensor. Objects
between the remote control unit and sensor
may prevent proper operation.
towards the remote control sensor. Objects
between the remote control unit and sensor
may prevent proper operation.
30°
30°
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place in an area
In addition, do not expose the remote control unit to liquids, and do not place in an area
with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
• The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such case, change the angle of the lighting or
TV, or operate the remote control unit closer to the remote control sensor.
TV, or operate the remote control unit closer to the remote control sensor.
RESET
button
6
5 m
Remote control sensor
LC-42XL2E-gb.indd 6
LC-42XL2E-gb.indd 6
2007/09/04 15:57:24
2007/09/04 15:57:24
Click on the first or last page to see other LC-52XL2E (serv.man10) service manuals if exist.