Sharp LC-52XD1E (serv.man5) Service Manual ▷ View online
LC-46/52XD1E-RU
6 – 17
<When EXT5 is used for external input> No picture on the display (7)
No EXT5 (HDMI) output of the external input system.
Checklist:
1) Is "INPUT SOURCE" button
on tne remote control set up correctly? ... See the operation manual and set "INPUT SOURCE" to "EXT5".
2) Have you checked the type video signal sent from HDMI-connected external device? ...Confirm the type (it should "RGB", "YCbCr 4:4:4" or
"YCbCr 4:2:2").
3) Have you checked the type of Color matrix sent from HDMI-connected external device? ... Confirm the type (it should be "ITU601" or
"ITU709".)
4) Is ANT-CABLE disconnected or connected improperly? ... Connect it correctly as per the operation manuall
"YCbCr 4:2:2").
3) Have you checked the type of Color matrix sent from HDMI-connected external device? ... Confirm the type (it should be "ITU601" or
"ITU709".)
4) Is ANT-CABLE disconnected or connected improperly? ... Connect it correctly as per the operation manuall
Is "EXT5" selected with
button on the remote control?
NO
Select "EXT5" with
button on the remote control.
YES
Is the type of video signal (Signal Type) from HDMI- con-
nected extennal device set?
nected extennal device set?
NO
From MENU-Connections-HDMI setup-EXT5-Signal type, select a
signal type
("RGB", "YCbCr 4:4:4" or "YCbCr 4:2:2")
signal type
("RGB", "YCbCr 4:4:4" or "YCbCr 4:2:2")
YES
Is the type of color signal (Color matrix) from HDMl -connected
external device set?
external device set?
NO
From MENU-Connections-HDMI setup-EXT5-Color Matrix, select a
color signal type ( "ITU601" or "ITU709")
color signal type ( "ITU601" or "ITU709")
YES
Is TMDS signal (RX*
±signal) sent to pins (1) - (12) of
EXT5 (HDMI) termina (SC1901)?
NO
Is I2C signal (SDA/SCL signal)sent to pins (16) and (15) of EXT5
(HDMI) terminal? Check external connection and peripheral cir-
cuits.
(HDMI) terminal? Check external connection and peripheral cir-
cuits.
YES
Is 8bit-DIGITAL signal (HDMI- R/G/B) sent from pins (110)-
(144) of IC1905 (HDMI-RECEIVER)?
(144) of IC1905 (HDMI-RECEIVER)?
NO
Check power supply (3.3/1.8V) pins (99) and (74) of IC1905,
SDA/SCL signal pins (29) and (30), and peripheral circuits.
SDA/SCL signal pins (29) and (30), and peripheral circuits.
YES
Is 8bit-DIGITAL signal (HDMI- R/G/B) sent to pins (B10) -
(D15) of IC3002 (V-PRO.)?
(D15) of IC3002 (V-PRO.)?
NO
Check SDA3/SCL3 signal pins (27) and (28), interface between
IC1905 and lC3002, and peripheral circuits.
IC1905 and lC3002, and peripheral circuits.
YES
Is LVDS video signal (TA1
± - TD1±) sent to pins (AB8)/(AC8) - (AB3)/(AC3) of IC3002 (V-PRO.), and
is CLK signal (CK1
±) sent to pins (AB5)/(AC5)?
Is LVDS video signal (TA2
± - TD2±) sent to pins (AC2)/(AC1) - (V2)/(V1) of IC3002 (V-PRO.), and is
CLK signal (CK2
±) sent to pins (Y2)/(Y1)?
NO
Check pins (G14)/(U10) of
BU3.3V line of IC3002 (V-
PRO.), pins (G10)/(N17) of
BU2.5V line,pins (U16)/
(G12) of BU1.8V line and
peripheral circuits.
BU3.3V line of IC3002 (V-
PRO.), pins (G10)/(N17) of
BU2.5V line,pins (U16)/
(G12) of BU1.8V line and
peripheral circuits.
YES
1
LC-46/52XD1E-RU
6 – 18
Is LVDS video signal (TA1
± - TD1±) sent to pins (3)/(2) -(12)/(11) of CONNECTOR CN1 of LCD-
CONT-UNIT, and is CLK signal (CK1
±) sent to pins (10)/(9)?
Is LVDS video signal (TA2
± - TD2±) sent to pins (17)/(16) -(26)/(25) of CONNECTOR CN1 of LCD-
CONT-UNIT, and is CLK signal (CK2
±) sent to pins (24)/(23)?
NO
Check CONNECTOR
(SC2302, CN1) and HAR-
NESS WIRE (LV).
(SC2302, CN1) and HAR-
NESS WIRE (LV).
YES
Is power (+12V) supplied to pins (1) - (5) of CONNECTOR CN2 in LCD-CONT-UNIT?
NO
Check CONNECTOR
(CN2,P707) and HAR-
NESS WIRE (PL).
(CN2,P707) and HAR-
NESS WIRE (PL).
YES
Replace LCD-CONT-UNIT.
1
LC-46/52XD1E-RU
6 – 19
<When EXT6 is used for external input> No picture on the display (8)
No EXT6 (HDMI) output of the external input system.
Checklist:
1) Is "INPUT SOURCE" button
on tne remote control set up correctly? ... See the operation manual and set "INPUT SOURCE" to "EXT6".
2) Have you checked the type video signal sent from HDMI-connected external device? ...Confirm the type (it should "RGB", "YCbCr 4:4:4" or
"YCbCr 4:2:2").
3) Have you checked the type of Color matrix sent from HDMI-connected external device? ... Confirm the type (it should be "ITU601" or
"ITU709".)
4) Is ANT-CABLE disconnected or connected improperly? ... Connect it correctly as per the operation manuall
"YCbCr 4:2:2").
3) Have you checked the type of Color matrix sent from HDMI-connected external device? ... Confirm the type (it should be "ITU601" or
"ITU709".)
4) Is ANT-CABLE disconnected or connected improperly? ... Connect it correctly as per the operation manuall
Is "EXT6" selected with
button on the remote control?
NO
Select "EXT6" with
button on the remote control.
YES
Is the type of video signal (Signal Type) from HDMI- con-
nected extennal device set?
nected extennal device set?
NO
From MENU-Connections-HDMI setup-EXT6-Signal type, select a
signal type
("RGB", "YCbCr 4:4:4" or "YCbCr 4:2:2")
signal type
("RGB", "YCbCr 4:4:4" or "YCbCr 4:2:2")
YES
Is the type of color signal (Color matrix) from HDMl -connected
external device set?
external device set?
NO
From MENU-Connections-HDMI setup-EXT6-Color Matrix, select a
color signal type ( "ITU601" or "ITU709")
color signal type ( "ITU601" or "ITU709")
YES
Is TMDS signal (RX*
±signal) sent to pins (1) - (12) of EXT6
(HDMI) termina (SC1901)?
NO
Is I2C signal (SDA/SCL signal)sent to pins (16) and (15) of EXT6
(HDMI) terminal? Check external connection and peripheral cir-
cuits.
(HDMI) terminal? Check external connection and peripheral cir-
cuits.
YES
Is 8bit-DIGITAL signal (HDMI- R/G/B) sent from pins (110)-
(144) of IC1905 (HDMI-RECEIVER)?
(144) of IC1905 (HDMI-RECEIVER)?
NO
Check power supply (3.3/1.8V) pins (99) and (74) of IC1905,
SDA/SCL signal pins (29) and (30), and peripheral circuits.
SDA/SCL signal pins (29) and (30), and peripheral circuits.
YES
Is 8bit-DIGITAL signal (HDMI- R/G/B) sent to pins (B10) -
(D15) of IC3002 (V-PRO.)?
(D15) of IC3002 (V-PRO.)?
NO
Check SDA3/SCL3 signal pins (27) and (28), interface between
IC1905 and lC3002, and peripheral circuits.
IC1905 and lC3002, and peripheral circuits.
YES
Is LVDS video signal (TA1
± - TD1±) sent to pins (AB8)/(AC8) -
(AB3)/(AC3) of IC3002 (V-PRO.), and is CLK signal (CK1
±)
sent to pins (AB5)/(AC5)?
Is LVDS video signal (TA2
Is LVDS video signal (TA2
± - TD2±) sent to pins (AC2)/(AC1) -
(V2)/(V1) of IC3002 (V-PRO.), and is CLK signal (CK2
±) sent
to pins (Y2)/(Y1)?
NO
Check pins (G14)/(U10) of BU3.3V line of IC3002 (V-PRO.), pins
(G10)/(N17) of BU2.5V line,pins (U16)/(G12) of BU1.8V line and
peripheral circuits.
(G10)/(N17) of BU2.5V line,pins (U16)/(G12) of BU1.8V line and
peripheral circuits.
YES
2
LC-46/52XD1E-RU
6 – 20
YES
Is LVDS video signal (TA1
± - TD1±) sent to pins (3)/(2) -(12)/(11) of CONNECTOR CN1 of LCD-
CONT-UNIT, and is CLK signal (CK1
±) sent to pins (10)/(9)?
Is LVDS video signal (TA2
± - TD2±) sent to pins (17)/(16) -(26)/(25) of CONNECTOR CN1 of LCD-
CONT-UNIT, and is CLK signal (CK2
±) sent to pins (24)/(23)?
NO
Check CONNECTOR
(SC2302, CN1) and HAR-
NESS WIRE (LV).
(SC2302, CN1) and HAR-
NESS WIRE (LV).
YES
Is power (+12V) supplied to pins (1) - (5) of CONNECTOR CN2 in LCD-CONT-UNIT?
NO
Check CONNECTOR
(CN2,P707) and HARNESS
WIRE (PL).
(CN2,P707) and HARNESS
WIRE (PL).
YES
Replace LCD-CONT-UNIT.
2
Click on the first or last page to see other LC-52XD1E (serv.man5) service manuals if exist.