Sharp LC-50LE751K (serv.man22) Service Manual / Technical Bulletin ▷ View online
LCD 2013 10 10
Date of Issue: 14
th
October 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 7
Sharp Electronics (UK) Limited
Reference
– RG14102013-2
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
MODELS
LC39LE651K
LC60LE651K
LC39LE751K
LC60LE751K
LC50LE651K
LC50LE751K
REASON
Important service information on how to insert or withdraw the LVDS cable from the
new EVAFLEX connectors.
new EVAFLEX connectors.
ACTION
LCD 2013 10 10
Date of Issue: 14
th
October 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 7
Sharp Electronics (UK) Limited
Reference
– RG14102013-2
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
FFC Insertion Method
Set the FFC to the connector horizontally as shown below:
Set the FFC to the connector horizontally as shown below:
LCD 2013 10 10
Date of Issue: 14
th
October 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 3 of 7
Sharp Electronics (UK) Limited
Reference
– RG14102013-2
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
FFC Insertion Method
….cont
Ensure the FFC is connected horizontally and deeply (Fully inserted).
LCD 2013 10 10
Date of Issue: 14
th
October 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 4 of 7
Sharp Electronics (UK) Limited
Reference
– RG14102013-2
Revision - 1
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
FFC Withdrawal Method
Press both release buttons on the connectors upside at the same time to release the
lock. The lock releases at a force of 20N. Excessive force may cause deformation of
the connector.
Press both release buttons on the connectors upside at the same time to release the
lock. The lock releases at a force of 20N. Excessive force may cause deformation of
the connector.
Display