DOWNLOAD Sharp LC-50LD266K (serv.man4) Service Manual ↓ Size: 5.06 MB | Pages: 18 in PDF or view online for FREE

•

Backlight: Change the level of backlight intensity�

•

Contrast: Change the level of bright parts in the 

video but keep the dark parts unchanged�

•

Brightness: Change the level of light in the video�

•

Saturation: Change the level of saturation�

•

Sharpness: Change the level of sharpness of fine 

details�

•

Tint: Change the colours to reddish or greenish� 

•

Colour Temperature: Set the colour temperature to 

Cool (bluer), Normal (balanced), Warm (redder)�

•

16:9 Overscan: When set to “On”, enlarge the 
image to hide the edge of the image�

•

* 

Digital Noise Reduction: Filter and reduce 

the noise in the video� 

* 

Active Contrast:  Dynamically improve the 

details of contrast in the video� 

* 

Gamma Adjustment: Change the tones 

between bright parts and dark parts� 

* 

Adaptive Backlight: Automatically optimize 

the backlighting levels for dark scenes�

Apart from manually adjusting picture settings, you 
can use 

Smart Picture to set your TV to a predefined 

picture setting�

•

Dynamic 

•

•

•

When you activate the 

Reset to Defaults, the TV 

enters to first time installation�

•

Bass: Adjust the amount of bass� 

•

Treble: Adjust the amount of treble�

•

Equalizer: Adjust the frequency level to suit your 

favourite sound quality�

•

Balance: Set the balance of the left and right 

speakers to best fit your listening position�

•

Headphone Volume: Adjust the volume of 

headphone�

•

Sound Surround: Automatically switch the TV to 

the best surround sound mode available from a 

broadcast� 

•

Audio CH: Select the audio mode�

•

Digital Output Type: Select the type of digital audio 

out�

•

HDMI 1 Input: Select to fit the input signal�

•

HDMI 2 Input: Select to fit the input signal�

•

Auto Volume Control: Reduce sudden volume 

changes, for example, during commercials or when 

switching from one channel to another�

•

Type: Select the type of audio broadcast�

* 

Normal: Set regular audio only.

* 

Hearing Impaired: Provides aids in 

understanding and enjoyment with subtitles 

(depending on the broadcaster).

* 

Visually Impaired: Set the mix of visually 

impaired audio with regular audio.

•

Visually Impaired: Adjust the output of visually 
impaired audio�

* 

* 

* 

Volume: Adjust the volume of outputs�

* 

Pan and Fade: Control the level of the main 
audio and the pan of the associated audio� 

Apart from manually adjusting sound settings, you 
can use 

Sound Mode to set your TV to a predefined 

sound setting�

•

•

•

When you activate the 

Reset to Defaults, the TV 

enters to first time installation�

This chapter provides instructions on how to reinstall 
channels as well as other useful channel installation 
features�
Select 

Tuning Mode > Access to enter�

E

Select 

1st Audio or 2nd Audio�

NOTE
•  If your selected audio language is not broadcasted, the 

default audio language will be displayed�

E

Your TV searches and stores all available digital and 
analogue TV channels as well as all available digital 
radio channels�

E

Update CH has similar function with Auto CH 
Search� The difference is you can update channel list 
without erasing the original information�

E

Antenna: 
Highlight the 

RF Channel box,  select a channel 

number you prefer to scan�

E

You can create a list of favourite channels�

E

Allows you to skip one or more channels �

NOTE
•  To watch the skipped channels, enter the channel 

numbers by using the 

digit buttons on the remote 

control or select from 

PR LIST�

E

Channel sort allows you to reorder the channels in the 
PR LIST�

E

Allows you to change the channel number or the 
channel name�

•

Channel: Enter a new channel by using the digit 
buttons on the remote control� 

•

Channel Name: Press the digit buttons on the 
remote control to rename the channel� 

NOTE
•  The new channel number you have entered can not 

override the exist one�

E

Select to clean all the channels that stored in the 
channel list�

Select the menu display language�

Change the video format to suit your content�

Set the current time and the sleep timer� 

•  Set 

•  Set 

Sleep Timer 

Sleep Timer switches the TV to standby after a 
defined period of time�

NOTE
•  When you press any button on the remote control with 

less than 

3 minutes left in the countdown, Sleep Timer 

will be automatically canceled�

You can enable subtitles for each TV channel� 
Subtitles are broadcasted via teletext or DVB-T digital 
broadcasts� With digital broadcasts, you have the 
additional option of selecting a preferred subtitle 
language�
When watching channels with hearing impaired service, 
you can enable the subtitle commentary for the hearing 
handicapped� For digital channels only�

NOTE
•  If your selected subtitle language is not broadcast, the 

default language subtitle will be displayed�

•  If the 

1st Subtitle language you selected is not 

available, the 

2nd Subtitle language will be displayed�

You can select Teletext language when the TV  receives 
Teletext signals broadcast by a TV network�

This function enables you to watch encrypted services 
(pay services)� (See page�11)

NOTE
•  This functions may not work depending upon the 

country broadcasting circumstances�

E

This function provides an extension of broadcast 
interactive services via broadcast transmission or IP 
connection�

E

Ask the viewer to enter the PIN to allow presentation�

E

When set to “

On”, enable network settings�

E

Display information of network connection�

E

•  Address Type

Select 

Auto to detect IP automatically, or select Manual 

to enter 

IP Address, Netmask, Gateway, Primary DNS, 

and 

Secondary DNS�

* 

* 

* 

* 

* 

E

Check if the TV connects to network successfully or 
not�

When you get the software updating news from the 
retailer or internet, you can update the operation 
software using the 

OAD (Over Air Download)� The 

updated software data will be transferred through the 
TV signal�

NOTE
•  Please do not switch off the TV during the downloading 

process�

You can use this function to save energy�

E

When set to “

On”,  you can turn the screen off and 

enjoy audio only�

E

When set to “

On”, the TV will decrease the power 

consumption and increase the backlight lifespan�

E

Allows the TV to automatically enter standby mode 
when there is no operation� 

Select the time to 

1 Hour /  

2 Hours / 4 Hours. Or select Off to disable this function�

NOTE
•  5 minutes before the TV enters standby mode, the 

remaining 

time is displayed every minute�

This function enables you to control the HDMI-CEC 
compliant device connected via the HDMI connector�

Select 

Store or Home� Store mode is recommended 

for displaying in a retail showroom, and Home mode 
is recommended for normal home using for energy 
saving�

You can label each input source (except 

USB) with a 

custom description�

When set to “

On”, the LED on the front of the TV turns 

on� 

Displays  the Software information�

When you activate the 

Reset, the TV enters to first 

time installation�

Lock TV channels or connected devices with a 
four-digit code to prevent children from watching 
unauthorized content�
You have to enter a 4-digit password every time to 
access 

Parental menu�

Enter “

0000” as the default password�

Lock TV channels to prevent children from watching 
certain channels�

NOTE
•  If you switch to the locked channel, you will be 

prompted to enter your password� (If your password is 
correct, the locked channel will be unlocked before the 
TV restarts from standby�)

Some digital broadcasters rate their programmes 
according to age� You can set TV to display only 
programmes with age ratings higher than your child’s�

Enter your new password in the 

New Password box 

by using the 

digit buttons on the remote control� 

Then, enter your new password again in the 

Password box�

Reset all the settings in the 

Parental menu�

Press 

Menu to access Slideshow Settings�

This TV is equipped with a USB1�1 and USB2�0 
compatible connector that enables you to view photos, 
listen to music, and play videos stored on a USB 
storage device�

NOTE
•  Depending on the USB device, the TV may not be able 

to recognise the contained data�

•  Use only alphanumeric characters for naming files�
•  File names over 80 characters (may vary depending on 

character set) may not be displayed�

•  Do not disconnect a USB device or memory card from 

the TV while transferring files, using the slide show 
function, when a screen is switching to another or before 
you exit “USB” from the “Input List” menu�

•  Do not connect and disconnect a USB device from the 

TV repeatedly�

Turn on the TV�

Connect the USB storage device to the USB port 
on the side of your TV�

Press b on the remote control and press      
to select 

USB input source and press OK� The 

USB menu appears�

Press     to select 

Photo, Music, or Video and 

press 

OK� The USB thumbnail browser appears�

Press         and 

OK to browse the files or 

folders� Press 

EXIT to return to the previous 

operation / folder�

In the thumbnail browser, press         to select 
a photo, a music or a video�

Press 

OK to view the image, play the MP3, or 

play the video�

Use the buttons on the remote control and follow 
the on-screen instructions�

I

F

 

Play or pause the slide show�

T

 / 

U

Go to the previous/next photo in the 
same directory�

Open the Photo sub-menu�

Blue button Rotate the photo�
EXIT

Return to the previous operation�

Fast forward the music�

Rewind the music�

I

F

 

Play or pause the music�

H

Stop the music�

T

 / 

U

Go to the previous/next music�

Open the music sub-menu�

Return to the previous operation�

Blue button Audio only�

Press 

Menu to access Music Setup Menu�

Fast forward the video�

Reverse the video�

I

F

 

Play or pause the video�

H

Stop the video�

T

 / 

U

Go to the previous/next chapter�

Open the video sub-menu

Return to the previous operation�

Press 

Menu to access Video Setup Menu�

USB Memory, USB card reader, HDD 

(Mass Storage class)

FAT32 / NTFS

JPEG (*�jpg), PNG

MPEG1 (*�MP3)

Bitrate: 32k, 64k, 96k, 128k, 196k, 

256k, 320kbps

Sampling frequency: 32k, 44�1k, 48kHz

MPEG1/2 (*�AVI, *�MPG, *�MPEG, *�TS)

MPEG4 (*�AVI, *�MP4, *�MOV, *�MKV)

H�264 (*�AVI, *�MP4, *�MOV, *�MKV, *�TS)

XviD (*�AVI)

•  Progressive format jpeg files are not supported�
•  All files in a USB device with capacity may not be played 

properly�

•  Operation using USB hubs is not guaranteed�