Sharp LC-50LD266K (serv.man4) User Manual / Operation Manual ▷ View online
Connecting a USB device or external devices
10 -
- 11
• Cables used to extend the USB device must be certified
as USB 2�0�
• Video playback via a USB device may not be possible or
the playback quality affected if the device data transfer
speed rating is too low�
• File number over 1000 may not be displayed�
• No quickly operation between play / pause /
• No quickly operation between play / pause /
fast forward / rewind�
• The video might get judder or unsmooth when USB
read/write speed is under requirement(some Full HD
format)�
• Files in USB 1�1 devices may not be played properly�
• Some video file formats may not be played depending
• Some video file formats may not be played depending
on the file�
Inserting the Smartcard into CA module
In order to receive coded digital stations, a Conditional
Access module (CA module) and a Smartcard must be
inserted into the CI (Common Interface) slot of the TV�
The CA module and the Smartcard are not supplied
accessories� They are usually available from your
dealer�
Access module (CA module) and a Smartcard must be
inserted into the CI (Common Interface) slot of the TV�
The CA module and the Smartcard are not supplied
accessories� They are usually available from your
dealer�
Inserting the Smartcard into the CA module
1�
Carefully insert the CA module into the CI slot
with the contact-side forward�
with the contact-side forward�
2�
The logo on the CA module must be facing
outward from the rear of the TV�
outward from the rear of the TV�
NOTE
• It takes about 30 seconds to certify the license key
when you insert a Smartcard into the CI+ compatible
CA module for the first time� This process may fail when
there is no antenna input or you have never run “Auto
installation”�
• The CI+ compatible CA module sometimes upgrades
its firmware� You may not receive any TV images before
upgrading� You can only use the power button during
upgrading�
• The CI+ compatible CA module does not allow you to
output any copy protected programmes using monitor
out�
• If the TV displays an update confirmation message
for the Smartcard while receiving CI+ compatible
broadcasts, follow the screen prompts�
• Make sure that the CA module is properly inserted�
Checking CA module information
After inserting and activating the CA module, make
sure the input source is
sure the input source is
TV�
NOTE
• This menu is only available for digital stations�
• The content of this menu depends on the provider of the
• This menu is only available for digital stations�
• The content of this menu depends on the provider of the
CA module�
Module: General information on CA module displays�
Menu:
Adjustment parameters of each Smartcard
displays�
Enquiry: You can input numerical values such as
passwords here�
HDMI connection
One touch play
• When the TV is in standby mode, it will automatically
• When the TV is in standby mode, it will automatically
turn on and play back the image from the HDMI
source�
source�
Audio return channel (ARC)
The TV can send audio data for video content shown
on the TV to a connected audio device with just one
ARC-compatible HDMI cable� Using this function
eliminates the need to use a separate digital or
analogue audio cable�
on the TV to a connected audio device with just one
ARC-compatible HDMI cable� Using this function
eliminates the need to use a separate digital or
analogue audio cable�
Connection for using “Audio return channel”
• You need to use ARC-compatible cables/devices
• You need to use ARC-compatible cables/devices
and connect to the
HDMI 1 terminal to activate this
function�
Supported display resolutions
Computer formats (PC)
Resolution
Resolution
Refresh rate
640 x 480
60Hz
800 x 600
56Hz
800 x 600
60Hz
1024 x 768
60Hz
1280 x 768
60Hz
1360 x 768
60Hz
1280 x 1024
60Hz
Video formats
Resolution
Refresh rate
480i
60Hz
480p
60Hz
576i
50Hz
576p
50Hz
720p
50Hz, 60Hz
1080i
50Hz, 60Hz
1080p
(HDMI only) 50Hz, 60Hz, 24Hz
12 -
Appendix
Troubleshooting
Problem
Possible Solution
No picture
1� Connect power cord correctly�
2� Turn on power�
3� Connect signal cable correctly�
4� Press any button on the LCD TV�
2� Turn on power�
3� Connect signal cable correctly�
4� Press any button on the LCD TV�
Abnormal colours
Connect signal cable correctly�
Twisted picture
1� Connect signal cable correctly�
2� Please use compatible signal�
2� Please use compatible signal�
Picture too dark
Adjust brightness and contrast�
Audio only, no images
1� Please check if input signal is connected correctly�
2� TV-RF signal must not be lower than 50dB�
2� TV-RF signal must not be lower than 50dB�
Picture only, no audio
1� Connect signal cable correctly�
2� Adjust volume to proper level�
3� Connect audio signal cable correctly�
4� TV-RF signal must not be lower than 50dB�
2� Adjust volume to proper level�
3� Connect audio signal cable correctly�
4� TV-RF signal must not be lower than 50dB�
Cannot use remote control
1� Please change battery�
2� Turn off power for 10 seconds; and then restart power�
2� Turn off power for 10 seconds; and then restart power�
Cannot receive sufficient channels
through antenna
Please use the Channel Scan function to increase the number of channels not
included in memory�
No colour
Please adjust the colour setup�
Blinking picture accompanied by ghost
image
1� Check the connection of antenna/signal cable�
2� Check if channel is in play mode�
3� Press signal source and change input mode�
2� Check if channel is in play mode�
3� Press signal source and change input mode�
Broken lines or segments
Adjust antenna�
Keep the TV away from noise sources, such as automobiles, neon lights, and
Keep the TV away from noise sources, such as automobiles, neon lights, and
hair dryers�
Certain TV channels are blocked (Hope
to acquire some channels)
Please use the Update Scan method to add the channels not included in
memory�
Overlapping images or ghost images
Please use multi-directional outdoor antenna�
(If your TV is subject to the influence of nearby mountains or buildings)�
(If your TV is subject to the influence of nearby mountains or buildings)�
Cannot use a function
If the item you choose turns gray, that item cannot be selected�
Cannot receive programmes
Please use the Update Scan method to add the channels not included in
memory�
Environmental specifications
Item
32”
42”
46”
50”
*1 On-Mode (W)
Standard
40W
68W
69W
83W
*2 Energy-Save-Mode (W)
Eco > On
32W
54W
55W
67W
*3 Standby-Mode (W)
0�26W
0�28W
0�28W
0�28W
*4 Annual Energy Consumption (kWh)
58kWh
99kWh
101kWh
121kWh
*5 Annual Energy Consumption (kWh)
(Energy-Save-Mode)
Eco > On
46�8kWh
79kWh
81kWh
98kWh
6 Energy Classification
Class A
Class A
Class A
Class A
*1 Measured according to IEC 62087 Ed� 2 / Ed� 3
*2 For further information about the Energy Save function, please see related pages in this operation manual
*3 Measured according to EN 50564: 2011
*4 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4
*2 For further information about the Energy Save function, please see related pages in this operation manual
*3 Measured according to EN 50564: 2011
*4 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4
hours a day, 365 days a year
*5 Annual energy consumption is calculated on the basis of the Energy-Save-Mode power consumption, watching TV 4
hours a day, 365 days a year�
NOTE
• The power consumption of On-Mode varies depending on the images the TV displays�
• The power consumption of On-Mode varies depending on the images the TV displays�
- 13
Appendix
Specification
Item
32” LCD COLOUR TV
Model: LC-32LD166
42” LCD COLOUR TV
Model: LC-42LD266
46” LCD COLOUR TV
Model: LC-46LD266
50” LCD COLOUR TV
Model: LC-50LD266
LCD screen size (diagonal)
32” / 80 cm
42” / 107 cm
46” / 117 cm
50” / 126 cm
Number of dots
3,147,264 dots
(1366 x 768 x 3 dots)
6,220,800 dots
(1920 x 1080 x 3 dots)
Video Colour System
PAL/SECAM/NTSC 3�58/NTSC 4�43/PAL 60
TV
Function
TV-Standard
Analogue CCIR (B/G, I, D/K)
Digital
DVB-T (2K/8K OFDM), DVB-T2
Receiving
Channel
VHF/UHF ATV: IRA-E69, DVB-T: E5-E69
CATV
S-band, S1–S41ch
TV-Tuning System
Auto Preset 1599 ch, Auto Label, Auto Sort
Stereo/Bilingual
NICAM/A2
Audio amplifier
5 W x 2
8 W x 2
Speaker (mm)
132(H) x 34(W) x 30(D)
Rear
ANTENNA
UHF/VHF 75
Ω
SCART
SCART (AV input, Y/C input, RGB input, TV output )
ETHERNET
Network connector
CVBS/COMPONENT
CVBS/Y/Pb(Cb)/Pr(Cr), RCA pin (L/R)
Digital Audio out
Optical Digital audio output x 1 (PCM)
HDMI 1
Digital video and audio input, ARC
HDMI 2
Digital video and audio input
Side
C� I� (Common Interface) EN50221, R206001, CI Plus specification
USB
Software update, multi-media play
HEADPHONE
Ø 3�5mm jack (Audio output)
OSD Language
English, German, French, Italian, Dutch, Spanish, Greek, Portuguese, Swedish, Finnish, Russian,
Polish, Turkish, Hungarian, Czech, Slovak, Danish, Norwegian, Estonian, Latvian, Lithuanian,
Slovenian, Bulgarian, Croatian, Romanian, Serbian, Ukrainian
Power Requirement
AC 220–240 V, 50 Hz
Power Consumption
53 W
(Standby < 0�3W)
(Method IEC62087)
80 W
(Standby < 0�3W)
(Method IEC62087)
85 W
(Standby < 0�3W)
(Method IEC62087)
90 W
(Standby < 0�3W)
(Method IEC62087)
Weight
Without stand
5�84 kg
11�1 kg
13�16 kg
13�86 kg
With stand
6�2 kg
11�8 kg
13�93 kg
14�7 kg
Operating temperature
0°C to +40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice� The performance specification figures indicated are nominal values of production units� There may be
some deviations from these values in individual units�
NOTE
• 32” Unit without base weight=5�84 kg The equipment and its associated mounting means still remain secure during the test� (Used wall
mounting kit, 100 x 100 mm distance, diameter of Screw dimension: M6 x 18 ) or equivalent�
• 42” Unit without base weight=11�1 kg The equipment and its associated mounting means still remain secure during the test� (Used wall
mounting kit, 200 x 200 mm distance, diameter of Screw dimension: M6 x 16 ) or equivalent�
• 46” Unit without base weight=13�16 kg The equipment and its associated mounting means still remain secure during the test� (Used
wall mounting kit, 200 x 200 mm distance, diameter of Screw dimension: M6 x 18 ) or equivalent�
• 50” Unit without base weight=13�86 kg The equipment and its associated mounting means still remain secure during the test� (Used
wall mounting kit, 400 x 400 mm distance, diameter of Screw dimension: M6 x 18 ) or equivalent�
• Refer to the inside back cover for dimensional drawings�
• Audio cannot be output through the HDMI terminal�
• Audio cannot be output through the HDMI terminal�
14 -
Attention:
Your product is marked
with this symbol� It means
that used electrical and
electronic products
should not be mixed with
general household waste�
There is a separate
collection system for
these products�
Your product is marked
with this symbol� It means
that used electrical and
electronic products
should not be mixed with
general household waste�
There is a separate
collection system for
these products�
A� Information on Disposal for Users (private households)
1� In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust
bin!
Used electrical and electronic equipment must be treated separately and in accordance
with legislation that requires proper treatment, recovery and recycling of used electrical
and electronic equipment�
with legislation that requires proper treatment, recovery and recycling of used electrical
and electronic equipment�
Following the implementation by member states, private households within the EU
states may return their used electrical and electronic equipment to designated collection
facilities free of charge*� In some countries* your local retailer may also take back your old
product free of charge if you purchase a similar new one�
states may return their used electrical and electronic equipment to designated collection
facilities free of charge*� In some countries* your local retailer may also take back your old
product free of charge if you purchase a similar new one�
*) Please contact your local authority for further details�
If your used electrical or electronic equipment has batteries or accumulators, please
dispose of these separately beforehand according to local requirements�
dispose of these separately beforehand according to local requirements�
By disposing of this product correctly you will help ensure that the waste undergoes the
necessary treatment, recovery and recycling and thus prevent potential negative effects
on the environment and human health which could otherwise arise due to inappropriate
waste handling�
necessary treatment, recovery and recycling and thus prevent potential negative effects
on the environment and human health which could otherwise arise due to inappropriate
waste handling�
2� In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the
correct method of disposal�
correct method of disposal�
For
Switzerland: Used electrical or electronic equipment can be returned free of charge
to the dealer, even if you don’t purchase a new product� Further collection facilities are
listed on the homepage of
listed on the homepage of
www�swico�ch or www�sens�ch�
B� Information on Disposal for Business Users
1� In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the
product� You might be charged for the costs arising from take-back and recycling� Small
products (and small amounts) might be taken back by your local collection facilities�
product� You might be charged for the costs arising from take-back and recycling� Small
products (and small amounts) might be taken back by your local collection facilities�
For
Spain: Please contact the established collection system or your local authority for
take-back of your used products�
2� In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the
correct method of disposal�
correct method of disposal�
For
EU: The crossed-out wheeled bin implies that used batteries should not be put to
the general household waste! There is a separate collection system for used batteries, to
allow proper treatment and recycling in accordance with legislation�
allow proper treatment and recycling in accordance with legislation�
Please contact your local authority for details on the collection and recycling schemes�
For
Switzerland: The used battery is to be returned to the selling point�
For other
non-EU countries: Please contact your local authority for correct method of
disposal of the used battery�
Click on the first or last page to see other LC-50LD266K (serv.man4) service manuals if exist.