Sharp LC-46X8E (serv.man10) User Manual / Operation Manual ▷ View online
Introduction
15
16
17
17
18
19
20
21
19
20
21
22
23
24
25
4
3
2
5
6
6
7
8
9
8
9
10
11
12
13
14
1
B (Standby/On)
(Page 10)
(Page 10)
Buttons for useful operations
m (Teletext)
ATV: Display analogue teletext. (Page
14)
DTV: Select MHEG-5 and teletext for
DTV. (Page 14)
ATV: Display analogue teletext. (Page
14)
DTV: Select MHEG-5 and teletext for
DTV. (Page 14)
k (Reveal hidden Teletext)
(Page 14)
(Page 14)
[ (Subtitle)
Switch subtitle languages on/off.
(Pages 14 and 28)
Switch subtitle languages on/off.
(Pages 14 and 28)
3 (Freeze/Hold)
Press to freeze a moving image on
the screen.
TELETEXT: Stop updating Teletext
pages automatically or release the
hold mode.
Press to freeze a moving image on
the screen.
TELETEXT: Stop updating Teletext
pages automatically or release the
hold mode.
1 (Subpage)
(Page 14)
(Page 14)
v (Top/Bottom/Full)
Set the area of magnification in
teletext mode. (Page 14)
Set the area of magnification in
teletext mode. (Page 14)
0 - 9 numeric buttons
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
The channel display for the LC-
46X8S model has 4-digits and the
LC-46X8E model has 3-digits.
46X8S model has 4-digits and the
LC-46X8E model has 3-digits.
A (Flashback)
Press to return to the previous image
in normal viewing mode.
Press to return to the previous image
in normal viewing mode.
DTV
Press to access DTV mode.
Press to access DTV mode.
ATV
Press to access conventional
analogue TV mode.
Press to access conventional
analogue TV mode.
2 (Sound mode)
Select the sound multiplex mode.
(Page 10)
Select the sound multiplex mode.
(Page 10)
i (
k/l) (Volume)
Increase/decrease TV volume.
e (Mute)
TV sound on/off.
TV sound on/off.
f (WIDE MODE)
Select the wide mode. (Pages 29
and 33)
Select the wide mode. (Pages 29
and 33)
AV MODE
Select a video setting. (Page 25)
Select a video setting. (Page 25)
1
2
3
•
4
5
6
7
8
9
0
Q
END
Exit the “MENU” screen.
Exit the “MENU” screen.
R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen. (e.g.
EPG, MHEG-5, TELETEXT)
The coloured buttons are
correspondingly used to select the
coloured items on the screen. (e.g.
EPG, MHEG-5, TELETEXT)
b (INPUT SOURCE)
Select an input source. (Page 10)
Select an input source. (Page 10)
EPG
DTV: Display the EPG screen. (Pages
11 - 13)
DTV: Display the EPG screen. (Pages
11 - 13)
RADIO
DTV: Switch between Radio and
Data mode.
DTV: Switch between Radio and
Data mode.
When only data broadcasting (no
radio broadcasting) is transmitted
by DVB, the radio broadcasting
will be skipped.
radio broadcasting) is transmitted
by DVB, the radio broadcasting
will be skipped.
P. INFO
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen.
(DTV only)
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen.
(DTV only)
P (
r/s)
Select the TV channel.
p (Display information)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen. (Page 31)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen. (Page 31)
SLEEP
Press to schedule a time for the TV
to automatically standby. (Page 26)
Press to schedule a time for the TV
to automatically standby. (Page 26)
MENU
“MENU” screen on/off.
“MENU” screen on/off.
6 (Return)
Return to the previous “MENU”
screen.
Return to the previous “MENU”
screen.
ACTION (Action Mode)
This key does not work on this
model.
This key does not work on this
model.
AQUOS LINK buttons
If external equipment such as a
AQUOS BD Player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages 20
and 22 for details.
If external equipment such as a
AQUOS BD Player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages 20
and 22 for details.
E
R
T
Y
U
•
I
O
P
A
S
D
F
G
Remote control unit
a/b/c/d (Cursor)
Select a desired item on the setting
screen.
Select a desired item on the setting
screen.
OK
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen is
running.
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen is
running.
W
3
LC-46X8E_GB.indd 3
LC-46X8E_GB.indd 3
2008/02/14 15:45:44
2008/02/14 15:45:44
Introduction
2
3
4
12
13
16
6
7
8
9
10
11
1
15
14
5
AC INPUT terminal
EXT3 terminals
EXT4 (HDMI) terminal
Headphones
SERVICE socket
EXT3 terminals
EXT4 (HDMI) terminal
Headphones
SERVICE socket
1
2
3
4
5
2
3
4
5
TV (Front view)
TV (Rear view)
EXT1 (RGB) terminal
EXT2 (RGB) terminal
EXT8 (COMPONENT/AUDIO)
terminals
Antenna terminal
OUTPUT (AUDIO) terminals
DIGITAL AUDIO OUTPUT terminal
EXT2 (RGB) terminal
EXT8 (COMPONENT/AUDIO)
terminals
Antenna terminal
OUTPUT (AUDIO) terminals
DIGITAL AUDIO OUTPUT terminal
6
7
8
7
8
9
10
11
10
11
COMMON INTERFACE slot
RS-232C terminal
EXT5 (HDMI) terminal
EXT6 (HDMI/AUDIO) terminals
EXT7 (ANALOGUE RGB/AUDIO)
terminals
RS-232C terminal
EXT5 (HDMI) terminal
EXT6 (HDMI/AUDIO) terminals
EXT7 (ANALOGUE RGB/AUDIO)
terminals
12
13
14
15
16
13
14
15
16
4
Remote control sensor
OPC sensor
OPC indicator
SLEEP indicator
B (Standby/On) indicator
MENU
button
a (Power) button
i (
k/l) Volume buttons
P
(
r/s)
Programme (channel) buttons
b (INPUT SOURCE)
button
button
LC-46X8E_GB.indd 4
LC-46X8E_GB.indd 4
2008/02/14 15:45:45
2008/02/14 15:45:45
Confirm that there are 8 screws (4 short screws
and 4 long screws) with the stand unit.
and 4 long screws) with the stand unit.
Attach the supporting post for the stand unit
onto the base using the 4 long screws with the
hex key (supplied) as shown.
onto the base using the 4 long screws with the
hex key (supplied) as shown.
1
2
Preparation
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV. (Hold the stand so it will
not drop from the edge of the base area.)
bottom of the TV. (Hold the stand so it will
not drop from the edge of the base area.)
Insert and tighten the 4 short screws into
the 4 holes on the rear of the TV.
the 4 holes on the rear of the TV.
3
1
2
NOTE
To detach the stand unit, perform the steps in reverse
order.
order.
•
Supplied accessories
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•
•
•
•
•
•
5
Remote control unit
(
g1)
AC cord (
g1)
Stand unit (
g1)
Cable clamp (
g1)
Pages 3 and 6
Page 5
Page 8
Page 8
Operation manual (This publication)
•
“AAA” size battery (
g2) ... Page 6
•
Product shape varies in some countries.
Hex key
Hex key
Long screw
Short
screw
screw
Soft
cushion
cushion
LC-46X8E_GB.indd 5
LC-46X8E_GB.indd 5
2008/02/14 15:45:47
2008/02/14 15:45:47
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size batteries.
Place batteries with their terminals corresponding to the
(
(
k) and (l) indications in the battery compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
unit and sensor may prevent proper operation.
1
2
2
•
3
•
•
•
•
•
•
•
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such case, change the angle
of the lighting or TV, or operate the remote control unit closer to the remote
control sensor.
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such case, change the angle
of the lighting or TV, or operate the remote control unit closer to the remote
control sensor.
•
•
•
30°
30°
6
5 m
Remote control sensor
LC-46X8E_GB.indd 6
LC-46X8E_GB.indd 6
2008/02/14 15:45:50
2008/02/14 15:45:50
Click on the first or last page to see other LC-46X8E (serv.man10) service manuals if exist.