Sharp LC-46X8E (serv.man10) User Manual / Operation Manual ▷ View online
Basic adjustment
Channels with “Skip” set to “On” are passed over
when using P
when using P
r/Ps even if selected while watching
the image from the TV.
When connecting a decoder to the unit, you need to
select “EXT1” or “EXT2”.
select “EXT1” or “EXT2”.
NOTE
“Off” is factory preset value.
•
You can block the viewing of any channel.
NOTE
See “Child Lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
When pressing
When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
When pressing
6 while “Child lock has been activated”
displays, the PIN input menu will display. Inputting the
correct PIN lifts the “Child Lock” temporarily until the power
is turned off.
correct PIN lifts the “Child Lock” temporarily until the power
is turned off.
Sort
Channel positions can be sorted freely.
Press
c/d to select “Yes”, and then press OK.
Press
a/b/c/d to select the channel you want
to move, and then press OK.
Press
a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 3 and 4 until all desired channels
are sorted.
are sorted.
Erase Programme
An individual programme can be erased.
Press
c/d to select “Yes”, and then press OK.
Press
a/b/c/d to select the channel you want
to erase, and then press OK.
A message screen pops up.
Press
c/d to select “Yes”, and then press
OK to erase the selected programme. All the
subsequent programmes move up.
subsequent programmes move up.
Repeat steps 3 and 4 until all desired channels
are erased.
are erased.
•
•
•
•
E
1
2
2
3
4
E
1
2
2
•
3
4
Programme Setup
Setup
Analogue Setting
You can reconfigure Analogue TV channels settings
automatically or manually.
automatically or manually.
Additional Search
Use this menu to add new channels automatically after
auto installation has been made.
auto installation has been made.
Start searching channels after selecting colour system and
sound system.
sound system.
Manual Adjust
Use this menu to set up analogue TV channels
manually.
manually.
After selecting “Yes” on the screen, press
a/b/
c/d to select the channel you want to set and
then press OK.
then press OK.
E
•
E
You can adjust the frequency to the desired position.
NOTE
Adjust while checking the background picture as a
reference.
Instead of pressing
reference.
Instead of pressing
c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 - 9.
channel with 0 - 9.
EXAMPLE
179.25 MHz: Press 1
s 7 s 9 s 2 s 5.
49.25 MHz: Press 4
s 9 s 2 s 5 s OK.
•
•
•
•
•
Select the optimum colour system to receive. (“Auto”,
“PAL”, “SECAM”)
“PAL”, “SECAM”)
Select the optimum sound systems (Broadcasting
systems) to receive. (“B/G”, “D/K”, “I”, “L/L’”)
systems) to receive. (“B/G”, “D/K”, “I”, “L/L’”)
When a TV channel sends its Network Name, the
“Auto Installation” detects the information and assigns
a name to it. However, you can change individual
channel names.
“Auto Installation” detects the information and assigns
a name to it. However, you can change individual
channel names.
Press
a/b/c/d to select each character of the
new name for the channel, and then press OK.
Repeat step 1 above until the name is fully spelt
out.
out.
NOTE
The name can be 5 characters or less.
If a channel name is less than 5 characters, select “END” to
set the channel name.
If a channel name is less than 5 characters, select “END” to
set the channel name.
1
2
•
•
•
Analogue channel settings
27
Fine
Colour sys.
Sound sys. (Broadcasting systems)
Label
Skip
Decoder
Lock
LC-46X8E_GB.indd 27
LC-46X8E_GB.indd 27
2008/02/14 15:46:38
2008/02/14 15:46:38
Basic adjustment
Child Lock
Setup
Allows you to use a PIN to protect certain settings
from being accidentally changed.
from being accidentally changed.
Change PIN
Register a 4-digit password number to use the “Child
Lock” function.
Lock” function.
Enter the 4-digit number as a PIN using 0 – 9.
Enter the same 4-digit number as in step 1 to
confirm.
confirm.
“The system PIN has been changed successfully” displays.
NOTE
To view a locked channel, you must enter the PIN. (See pages 26
and 27 for locking channels from viewing in analogue TV and DTV
mode.) When you select a locked channel, a PIN prompt message
pops up. Press
and 27 for locking channels from viewing in analogue TV and DTV
mode.) When you select a locked channel, a PIN prompt message
pops up. Press
6 to display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
As a precautionary measure, make a note of your PIN on the
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
It prevents children from watching violent or sexual
scenes that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings used
exclusively in France.
Refer to page 40 for details about ratings.
exclusively in France.
Refer to page 40 for details about ratings.
1
2
2
•
•
•
•
•
Language
Setup
You can select a OSD language from the “Setup”
menu. Select from among 22 languages. (Czech,
Danish, Dutch, English, Estonian, Finnish, French,
German, Greek, Hungarian, Italian, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish)
menu. Select from among 22 languages. (Czech,
Danish, Dutch, English, Estonian, Finnish, French,
German, Greek, Hungarian, Italian, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish)
Subtitle
Digital Setup
Set up to 2 preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
subtitles for the hearing impaired) to display if subtitles
are available.
NOTE
Subtitles will not be displayed when the service does not contain
subtitle information.
subtitle information.
•
Digital Audio Language
Option
Set up to 3 preferred multi audio languages to display
if the audio languages are available.
if the audio languages are available.
Switching the multi audio languages
Each time you press
2 on the remote control, the
audio language switches.
E
Key Lock
Option
This function allows you to lock the buttons on the
TV or remote control in order to prohibit children from
changing the channel or volume.
TV or remote control in order to prohibit children from
changing the channel or volume.
NOTE
You cannot set both “RC Control Lock” and “Button Control Lock”
at the same time.
at the same time.
Cancelling the lock
Press the MENU button on the TV and set to “Off” to
cancel the “RC Control Lock”. Press the MENU button
on the remote control and set to “Off” to cancel the
“Button Control Lock”.
cancel the “RC Control Lock”. Press the MENU button
on the remote control and set to “Off” to cancel the
“Button Control Lock”.
Refer to page 23 for menu operation using MENU button on the
TV.
TV.
•
E
•
1st Language
E 2nd Language
For hearing impaired
E
E
E
Switching subtitle languages
Each time you press
[ on the remote control, the
subtitle switches.
E
Password/Parental lock settings
Off:
Unlock the buttons.
RC Control Lock:
Lock all buttons on the remote control.
Button Control Lock:
Lock the buttons on the TV except the
power switch.
Language Settings (language,
subtitle, multi audio)
subtitle, multi audio)
1st Language
Off
2nd Language
• • • • • •
1st Language
1st Language
(For hearing impaired)
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over the
above subtitle setting (Example: “1st Language” and “2nd
Language”, etc.).
above subtitle setting (Example: “1st Language” and “2nd
Language”, etc.).
EXAMPLE
•
28
Item
Selectable items
LC-46X8E_GB.indd 28
LC-46X8E_GB.indd 28
2008/02/14 15:46:38
2008/02/14 15:46:38
Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
4:3 Mode
Setup
The “WSS” signal has 4:3 auto-switching that allows
you to select between “Normal” and “Panorama”.
you to select between “Normal” and “Panorama”.
4:3 mode “Panorama”
4:3 mode “Normal”
“WSS” allows a television to switch automatically
among the different screen formats.
among the different screen formats.
NOTE
Use “WIDE MODE” if an image does not switch to the
correct screen format. When the broadcast signal contains
no “WSS” information, the function will not work even if
enabled.
correct screen format. When the broadcast signal contains
no “WSS” information, the function will not work even if
enabled.
Selecting the WSS picture size
manually
manually
•
Selecting the screen format
Selecting the WSS picture size
automatically
automatically
Normal:
Normal range keeping 4:3 or 16:9 aspect ratio.
Panorama:
Wide image without side bars.
Selecting the picture size manually
You can select the picture size. Selectable picture size
varies with the type of signal received.
varies with the type of signal received.
Normal:
Keeps the original aspect ratio in a full screen
display.
Zoom 14:9:
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also see bars on
the top and bottom with some programmes.
the top and bottom with some programmes.
Panorama:
In this mode the picture is progressively
stretched toward each side of the screen.
Full:
For 16:9 squeeze pictures.
Cinema 16:9:
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Cinema 14:9:
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Full:
Display with an Overscan image. Crops all sides of
screen.
Underscan:
Display with an Underscan image only when
receiving a 720p signal. Display with the High-Definition
image adjusted optimally. Noise may appear on the
edge of the screen with some programmes.
image adjusted optimally. Noise may appear on the
edge of the screen with some programmes.
Dot by Dot:
Displays an image with the same number
of pixels on the screen when receiving 1080i/1080p
signals only.
signals only.
NOTE
Some items do not appear depending on the type of
received signal.
received signal.
Press
f.
The “WIDE MODE” menu displays.
The menu lists the “WIDE MODE” options selectable
for the type of video signal currently received.
The menu lists the “WIDE MODE” options selectable
for the type of video signal currently received.
Press
f or
a/b while the “WIDE MODE”
menu displays on the screen.
As you toggle the options, each is immediately
reflected on the screen. There is no need to press OK.
reflected on the screen. There is no need to press OK.
Basically, if you set “WSS” to “On” in the “Setup”
menu, the optimum “WIDE MODE” is automatically
chosen for every broadcast, VCR or DVD. You can
however, change the screen format manually as
explained above.
menu, the optimum “WIDE MODE” is automatically
chosen for every broadcast, VCR or DVD. You can
however, change the screen format manually as
explained above.
NOTE
Aside from manually changing the “WIDE MODE” as
explained herein, the TV may detect and select the
optimum “WIDE MODE” according to the signal received.
explained herein, the TV may detect and select the
optimum “WIDE MODE” according to the signal received.
•
1
•
•
•
2
•
•
29
Item
Item (for SD [Standard-Definition] signals)
Item (for HD [High-Definition] signals)
LC-46X8E_GB.indd 29
LC-46X8E_GB.indd 29
2008/02/14 15:46:39
2008/02/14 15:46:39
You can use this menu to set the appropriate picture
size for viewing a 16:9 format TV programme on a 4:3
TV.
size for viewing a 16:9 format TV programme on a 4:3
TV.
REC Picture Size
Digital Setup
Setting to “4:3 TV”
Setting to “16:9 TV”
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the EXT4, 5 and 6 terminals.
appropriate picture size when viewing an HDMI signal
using the EXT4, 5 and 6 terminals.
Other picture and audio settings
Adjusting image position
HDMI Auto View
Setup
NOTE
This function must be set before recording.
Selecting the HDMI picture size
automatically
automatically
•
Position
Setup
For adjusting a picture’s horizontal and vertical
position.
position.
NOTE
Adjustments are stored separately according to input
source.
Depending on the input signal type or “WIDE MODE”
setting, a position setting may not be available.
source.
Depending on the input signal type or “WIDE MODE”
setting, a position setting may not be available.
•
•
DNR
Option
“DNR” (Digital Noise Reduction) produces a clearer
image. (“Off”, “High”, “Low”)
image. (“Off”, “High”, “Low”)
Automatic volume adjustment
Auto Volume
Option
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Clear Voice
Clear Voice
Option
This function emphasises speech against background
noise for greater intelligibility. It is not recommended for
music sources.
noise for greater intelligibility. It is not recommended for
music sources.
Audio Only
Audio Only
Option
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
can set the TV off and enjoy audio only.
Useful Viewing functions
Selecting the recording picture
size manually
size manually
H-Pos.:
Centres the image by moving it to the left or
right.
V-Pos.:
Centres the image by moving it up or down.
Reducing noise on the screen
Off:
Both screen images and audio are output.
On:
Audio is output without a screen image.
30
Item
Item
LC-46X8E_GB.indd 30
LC-46X8E_GB.indd 30
2008/02/14 15:46:40
2008/02/14 15:46:40
Click on the first or last page to see other LC-46X8E (serv.man10) service manuals if exist.