DOWNLOAD Sharp LC-45GD1E (serv.man43) Service Manual ↓ Size: 6.02 MB | Pages: 88 in PDF or view online for FREE

For viewing a video in monochrome.

Press  a/b to select “Monochrome”, and
then press OK.

Press  c/d to select “On”, and then press
OK.

Repeat steps 1 to 3 in I/P setting.

• When Monochrome is set to “On”, the menu screen in

DTV mode displays in monochrome.

Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.

Press a/b to select “Film Mode”, and then
press OK.

• Some items may be greyed out. They are not

selectable.

Press  c/d to select “On”, and then press
OK.

Repeat steps 1 to 3 in I/P setting.

Press  3D-Y/C to switch the 3D-Y/C function on and
off.

• “3D-Y/C” is set to “On” when the System is turned back

on.

• 3D-Y/C may not operate depending on the input signal

type or noisy input signal.

• 3D-Y/C is automatically set to “On” when you change

channels or input sources.

Provides high quality images with minimal dot crawl
and cross colour noise.

Normal adjustment

For movie image

For still image

Press  a/b to select “3D-Y/C”, and then
press OK.

Repeat steps 1 to 3 in I/P setting.

Press a/b to select the desired level, and
then press OK.

Adjusting the image and input signal can give you a
more beautiful picture.

Press a/b to select “I/P Setting”, and then
press OK.

• Some items may be greyed out. They are not

selectable.

Press  c/d to select “Fast” or “Slow”, and
then press OK.

• The I/P Setting is set to Slow when Film Mode is “On”.

• “3D-Y/C” is not selectable depending on the input signal

type.

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select “Advanced”, and then
press OK.

LC-45GD1E(E)-f

04.9.27, 10:15 AM

47

You can adjust the sound quality to your preference
with the following settings.

Press c/d to select “Audio”.

Press a/b to select a specific adjustment
item.

Press c/d to adjust the item to your desired
position.

cbutton

For weaker treble

For weaker bass

Decrease audio from
the right speaker

d

For stronger treble

For stronger bass

Decrease audio from
the left speaker

Press MENU and the MENU screen displays.

• For resetting all adjustment items to factory preset values,

press  a/b to select “Reset”, press OK, press c/d to
select “Yes”, and then press OK.

• Audio menu items are greyed out when Audio output is

variable or when headphones are in use.

• Balance is greyed out when Dolby Virtual is set to “On”.

Press c/d to select “Audio”.

Press MENU and the MENU screen displays.

Press  c/d to select “On”, and then press
OK.

Press  a/b to select “Dolby Virtual”, and
then press OK.

• Audio menu items are greyed out when Audio output is

variable or when headphones are in use.

• External Audio Bypass is greyed out when Dolby Virtual

is set to “On”.

• Balance is greyed out when Dolby Virtual is set to “On”.
• For some discs, setup may be required on your DVD. In

this case, please refer to the operation manual of your
DVD player.

• You may not get the Dolby Virtual Surround effect if you

adjust “Treble” or “Bass” setting.

You can also produce Dolby Virtual effects from the
“Audio” setting.

MENU    

[Audio]

Audio

Power Control

Treble

Bass

Balance

Dolby Virtual

Reset

[Off]

[0]

[0]

–15

L

+15

[0]

–15

+15

R

USER [TV]

LC-45GD1E(E)-g

04.9.27, 10:16 AM

48

When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.

Press  a/b to select “No Signal Off”, and
then press OK.

Press  c/d to select “Enable”, and then
press OK.

• Five minutes before the power shuts down,

remaining time displays every minute.

• “Disable” is factory preset value.
• When a TV programme finishes, and the AVC System

receives signal input, this function may not operate.

Press c/d to select “Power Control”.

Press MENU and the MENU screen displays.

When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.

Press a/b to select “No Operation Off”, and
then press OK.

Press  c/d to select “Enable”, and then
press OK.

•

Five minutes before the power shuts down,
remaining time displays every minute.

• “Disable” is factory preset value.

Press c/d to select “Power Control”.

Press MENU and the MENU screen displays.

Power control setting allows you to save energy.

Power control setting allows you to save energy.

When set, the power will automatically shut down.

Press a/b to select “Power Management”,
and then press OK.

Press a/b to select “Mode1” or “Mode2”,
and then press OK.

• No power management
• Factory preset value.

• If no signal inputs for 8 minutes, the power

shuts down.

• Even if you start using the PC and the signal

inputs again, the System stays off.

• The System turns on again by pressing

POWER (B) on the AVC System or B on
the remote control unit. (See page 20.)

• If no signal inputs for 8 seconds, the power

shuts down.

• When you start using the PC and the signal

inputs again, the System turns on.

• The System turns on again by pressing

POWER (B) on the AVC System or B on
the remote control unit. (See page 20.)

Press c/d to select “Power Control”.

Press MENU and the MENU screen displays.

LC-45GD1E(E)-g

04.9.27, 10:16 AM

49

• Sharp cannot be held responsible for misuse of the LCD TV set, any troubles during use, or other problems, or any

damages arising out of the use of the LCD TV set, except for those cases for which Sharp is liable by law.

• If you or other people misuse the LCD TV set, or the LCD TV set is affected by static electricity or electrical noise, the

recorded data may be in danger of being changed or lost.

• If you are making an important recording, run a test in advance to ensure that the recording would be performed correctly

in terms of picture or sound quality.

• Sharp cannot be held responsible nor make any compensations even if pictures or sound cannot be recorded correctly

because of any troubles when using the LCD TV set.

Note:

For U.K.
• Recording and playback of any material may require consent. Please refer particularly to the provisions of the

Copyright Act 1956, the Dramatic and Musical Performers Protection ACT 1958, the Performers Protection Acts
1963 and 1972 and to any subsequent statutory enactments and orders.

For Europe
• Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the

owner of the copyright.
Please refer to relevant law in your country.

Duplicating images and music by copying and/or editing from videocassettes and/or TV programmes that are
subject to copyrights is only permitted when the edited or copied versions are used for personal pleasure. With
the exception of cases when the user personally is the owner of the copyrights of the object in question or when
specific and written permission has been obtained from the owner(s) of the object in question, the user is not
permitted to make copies and/or duplications and/or edited versions as this constitutes a violation of the copy-
right laws, possible exposing the user to demands for compensation for damages. Therefore, be sure to strictly
observe the existing copyright laws.
In addition when using image data that includes third parties, since the use of such images without prior permis-
sion may constitute an intrusion on the privacy of third parties, be sure to refrain from such usage.

JPEG (DCF compliant)

640g480 dots

SP/LP... ASF (Motion Picture: MPEG-4 compliant, Sound: WMA-compliant)
EP........ ASF (Motion Picture: MPEG-4 compliant, Sound: G.726-compliant)

SP ... Size: 320g240 dots, Frame: approx. 25 frames/sec (50 Hz)
LP ... Size: 320g240 dots, Frame: approx. 25 frames/sec (50 Hz)
EP ... Size: 320g240 dots, Frame: approx. 12.5 frames/sec (50 Hz)

ASF (Motion Picture: MPEG-4 compliant, Sound: WMA-compliant)
ASF (Motion Picture: MPEG-4 compliant, Sound: G.726-compliant)

Approximate number of recordable pictures/time
Still pictures

Picture size

Approx. 1000 pictures

32MB

640g480

128MB

Approx. 300 pictures

Memory card

* Recordable numbers may vary depending on the receiving condition of the LCD TV set and/or content of images.

Motion pictures

* Motion picture files and still image files recorded, stored or edited with other devices may not play back correctly.

Memory card capacity

Picture size

256MB

5GB

Recording mode

320g240
320g240

320g240

SP

LP

EP

Approx. 10 min.

Approx. 30 min.

Approx. 1h

Approx. 4h

Approx. 10h

Approx. 25h

• Recordable time may vary depending on receiving condition of the LCD TV set or content of images.
• The maximum amount of data you can record on a memory card is 1,000 pictures in total including still and motion

pictures.

• Files in excess of 4GB and files exceeding 12 hours of recording time cannot be recorded and/or played back.

LC-45GD1E(E)-h

04.9.27, 10:17 AM

50