DOWNLOAD Sharp LC-45GD1E (serv.man43) Service Manual ↓ Size: 6.02 MB | Pages: 88 in PDF or view online for FREE

After the setting is complete, the System will
automatically execute Software Download
while you are away.

• Do not use MAIN POWER (

a

a

a

a

a) on the Display

to turn the System off or disconnect the AC
cords when the software update is
programmed. Doing so may cause the update
to fail. If problem arises ask a qualified service
personnel until the software update period
expires.

• The software update may take about 30 minutes, but may

take longer (up to 1 hour) depending on the signal status.
While updating, you can switch to TV or external input
mode or enter standby mode using 

B

B

B

B

B on the remote

control unit.

If Software Download starts while you are watching
analogue TV  broadcasts:
• The screen aler ts you and the update will start

automatically.

• To cancel the download, switch to the DTV mode and

follow the messages displayed on screen.

If Software Download starts while you are watching DTV
broadcasts:
• A confirmation message appears and the update will start

by following the messages displayed on screen.

• To cancel the download, select “No”, and then press OK.

To confirm that the update was successful
start the System Software (see page 41) and
check the version number.

With “Accept this software” selected in step
2, the screen now shows the time of next
software update.

Software download

Press OK to accept.

• Press OK to return to normal screen.

a

a

a

a

a) on the Display

• If the message prompts you to turn the System

off once and then on to start the update, press
B to enter standby and press B again to
turn back on.

• After the power on the screen automatically

switches to the download channel and
download screen opens.

A single DVB Common Interface (CI) will be
implemented to allow adoption of a Conditional Access
(CA) system by means of a plug-in CA module.
Scrambled Broadcasting service can be routed via the
CA system.
If the CA system on the CI module requires a smart-
card reader, this reader shall be part of the CI module.

Common Interface Module

CA card

When the compatible CA card is inserted, you can view the
programme without any operations.

When the compatible card is not inserted:

1 Select the programme which needs the compatible

CA card.
• The caution screen appears

2 Insert the compatible CA card.

• The caution screen disappears and you can view

the programme.

CA system supported by

Crypto Works
MediaGuard
VIAccess
Conax
Nagra Vision
Irdeto

• To view paid TV broadcasting, you need to make a contract

with a service provider.
Please contact a service provider for details.

• The Common Interface Module and the CA card are

neither supplied nor optional accessories.

LC-45GD1E(E)-e

04.9.27, 10:13 AM

43

You can also select a language from setup menu.
Select from among 10 languages.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Language”, and then
press OK.

Press  a/b/c/d to select the desired
language listed on the screen, and then
press OK.

Dutch
English
Finnish
French
German

Automatically adjusts the brightness of the screen.

Press c/d to select “Picture”.

Press MENU and the MENU screen displays.

Press a/b to select “OPC”.

Press c/d to select “On”.

The brightness is fixed at the value set in
“Backlight” (see page 45).

Automatically adjusts

• When set to “On”, the System senses the surrounding light

and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.

Press  OPC to switch the Optical Picture Control on
and off.

Italian
Portuguese
Spanish
Swedish
Turkish

LC-45GD1E(E)-f

04.9.27, 10:14 AM

44

Adjust the picture to your preference with the following
picture settings.

Press MENU and the MENU screen displays.

Press a/b to select a specific adjustment
item.

Press c/d to adjust the item to your desired
position.

Press c/d to select “Picture”.

• For resetting all adjustment items to the factory preset

values, press a/b to select “Reset”, and then press OK.

MENU    

[Picture]

Picture

Audio

USER [TV]

Contrast

OPC

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+16] –16

+16

Off

On

cbutton

The screen dims

For less contrast

For less brightness

For less colour
intensity

Skin tones become
purplish

For less sharpness

MENU    

[Picture]

Picture

Audio

Contrast

OPC

Brightness

Reset

[+30]

[0]

0

–30

+40

+30

Backlight

[+16] –16

+16

Off

On

Red

Green

Blue

Advanced

[0]

[0]

[0]

–30

–30

–30

+30

+30

+30

USER [PC]

• Select “Advanced” and then press OK to set “C.M.S-Hue”,

“C.M.S-Saturation”, “C.M.S-Value”, “Colour Temp.”,
“Sharpness Enhancement”, “Automatic Contrast”,  “I/P
Setting”, “Film Mode”, “3D-Y/C” or “Monochrome”. See
pages 46 and 47.

d

The screen brightens

For more contrast

For more brightness

For more colour
intensity

Skin tones become
greenish

For more sharpness

cbutton

The screen dims

For less contrast

For less brightness

For weaker red

For weaker green

For weaker blue

d

The screen brightens

For more contrast

For more brightness

For stronger red

For stronger green

For stronger blue

• Select “Advanced” and then press OK to set “C.M.S-Hue”,

“C.M.S-Saturation”, “C.M.S-Value” or “Sharpness
Enhancement”.

LC-45GD1E(E)-f

04.9.27, 10:15 AM

45

Colour tone is managed using the six-colour
adjustment setting.

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select “Advanced”, and then
press OK.

Press a/b to select “C.M.S.-Hue”, and then
press OK.

Press a/b to select a specific adjustment
item.

Press c/d to adjust the item to your desired
position.

• For resetting all adjustment items to the factory preset

values, press a/b to select “Reset”, and then press OK.

Adjusts the colour temperature to give the best white
image.

Press  a/b to select “Colour Temp.”, and
then press OK.

White with bluish tone

White with reddish tone

Repeat steps 1 to 3 in C.M.S. (Colour
Management System).

Press a/b to select the desired level, and
then press OK.

C. M. S-Hue

R

Y

G

C

B

M

Reset

[  0]

[  0]

[  0]

[  0]

–30

–30

–30

+30

–30

+30

+30

+30

[  0]

–30

+30

[  0]

–30

+30

Changing reds

closer to

magenta or yellow.

C. M. S-Saturation

C. M. S-Value

• You can select “C.M.S-Saturation” or “C.M.S-

Value” here instead of selecting “C.M.S-Hue”.

This is a standard to adjust the colour
either more reddish or more bluish in tone.

Increases or decreases the saturation of a
selected colour

A higher value makes the image brighter.
A lower value makes the image darker.

Adjusts black level and white level in images
automatically as appropriate to a particular scene.

Press a/b to select “Automatic Contrast”,
and then press OK.

Press c/d to select “On” or “Off”, and then
press OK.

Repeat steps  1 to 3 in C.M.S. (Colour
Management System).

Provides sharper images with more depth by adjusting
background sharpness.

Repeat steps  1 to 3 in C.M.S. (Colour
Management System).

Press  a/b to select “Sharpness
Enhancement”, and then press OK.

Press c/d to select the desired level, and
then press OK.

• The higher the number of the level, the more

sharpness and depth you will get in images.

Automatically adjusts

For normal images

LC-45GD1E(E)-f

04.9.27, 10:15 AM

46