DOWNLOAD Sharp LC-45GD1E (serv.man43) Service Manual ↓ Size: 6.02 MB | Pages: 88 in PDF or view online for FREE

Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services to
be displayed on screen. It also allows a range of new
features and services including subtitling and multiple
audio tracks.

Press a/b to select the country where you
are located.

Press OK to enter the setting.

• Installation screen displays. Press OK to go to

the next step.

Press a/b to select “Service scan”, and then
press OK.

• Search screen displays.

Search

Press  OK, and Search finds all the digital
broadcasting channels viewable in your area.

• The Search menu disappears and you can

watch the programme.

Press DTV to switch to the DTV mode.

For viewing digital broadcasts, please follow the
procedure below to setup.

• In DTV mode, some menu items displayed in black cannot

be selected.

• If you exit DTV mode while Virgin mode is still incomplete,

go back to step 1 and try it again.

When you cannot find the country you live
in, select the country from the list which
shares the same time zone.

Austria
Belgium
Denmark
Finland
France
Germany
Greece
Italy
Luxembourg

Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
Turkey
United Kingdom

LC-45GD1E(E)-b

04.9.27, 9:59 AM

15

STANDBY/ON indicator

MAIN POWER button (

a

)

OPC sensor*

INPUT button

VOLUME buttons

( il/k )

CHANNEL buttons
(Ps/r)

Remote control sensor

*OPC: Optical Picture Control

(See page 44.)

Remote Control indicator

OPC indicator

LC-45GD1E(E)-b

04.9.27, 9:59 AM

16

INPUT 1 (SCART)

INPUT 3
(Y, P

B

(C

B

)

, 

 P

R

(C

R

))

INPUT 2  (SCART)

DISPLAY OUTPUT 3

DISPLAY OUTPUT 1

AC INPUT

RS-232C**

INPUT 3 (SCART)

AV OUTPUT (VIDEO)

AV OUTPUT
(AUDIO)

* Press RESET if the system cannot return to its original state after performing various operations.

This will reset the System as shown below.

• AV MODE resets to USER.
• Analogue TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.

** Press SYSTEM RESET if the system does not operate after starting up.

• Pressing RESET will not work if the System is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and PIN. See page 73 for resetting the PIN when you know it. See page

85 for initialising to the factory preset values when you forget your PIN.

ANTENNA INPUT

DISPLAY OUTPUT 2

DC OUTPUT

DIGITAL AUDIO
OUTPUT*

SPEAKER-B

DIGITAL ANTENNA INPUT

DIGITAL ANTENNA OUTPUT

*Connect a digital audio equipment.
**Provided for command from PC (see pages 80 and 81).

COMMON
INTERFACE slot

RESET*

POWER button

INPUT 4 (S-VIDEO)

INPUT 4 (VIDEO)

SYSTEM RESET**

INPUT 4 (AUDIO L/R)

How to open the door.

STANDBY/ON indicator

PC CARD slot

CARD indicator

Headphone
(When connecting headphones, the sound from the speakers is muted.)

INPUT 5 (AUDIO)

INPUT 5 (DVI-I)

CENTRE CHANNEL
INPUT

• Still image mode deactivates.
• Teletext mode resets to normal.
• Speaker setting resets to SPEAKER-A.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.

LC-45GD1E(E)-b

04.9.27, 9:59 AM

17

• When using the remote control unit, point it at the Display.

B (STANDBY/ON)
To switch the power on and off. (See page 20.)

OPC
To switch the Optical Picture Control on and off. (See page
44.)

c (DUAL screen)
Set the dual picture mode. Press c again to return to normal
view. (See page 75.)
SELECT
To select either screen to be active in Dual screen mode.

d (FREEZE/HOLD)
TV/External input mode: Change the still image mode.
TELETEXT mode: Freeze a multi-page on screen while other
pages are automatically updated. Press d again to return
to the normal image. (See pages 75 and 76.)

f (WIDE MODE)
TV/External input mode: Change the wide image mode. (See
pages 69 and 70.)
TELETEXT mode: Set the area of magnification. (full/upper
half/lower half) (See page 76.)

CARD
Switch to the card mode.
Card mode: Press to turn the Card Control Panel on and off.
(See page 52).

E/REC STOP
Still image: Press to capture a still image to a card after
freezing the image from analogue broadcasts or external
equipment. (See page 53).
Motion picture: Press to start/stop recording a motion picture
to a card from analogue broadcasts or external equipment.
(See page 56).

0 – 9
TV/DTV/External input mode: Set the channel.
TELETEXT mode: Set the page.

A (Flashback)
Press to return to the previous image in normal viewing mode.
(See page 21.)

[ (SUBTITLE for TELETEXT)
TV/External input mode: To turn the subtitles on and off. (See
page 77.)
DTV input mode: Display the subtitle selection screen.

k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 76.)

SOUND
Select the sound multiplex mode. (See page 22.)

il/ik (VOLUME)
Set the volume. (See page 23.)

e (MUTE)
Mute the sound. (See page 23.)

GUIDE
DTV input mode: To display EPG (Electronic Programme
Guide) screen.

DTV MENU
DTV input mode: Display the digital TV menu screen.

EXIT
Turn off the On Screen Display.

SLEEP
Set the Sleep timer. (See page 72.)

p (DISPLAY INFORMATION)
Display the programme information.

AV MODE
Select a video setting: AV MODE (STANDARD, MOVIE,
GAME, USER, DYNAMIC), PC MODE (STANDARD, USER)
(See page 68.)

3D–Y/C
To switch the 3D Y/C function on and off. (See page 47.)

LC-45GD1E(E)-b

04.9.27, 9:59 AM

18