Sharp LC-42XL2E (serv.man10) User Manual / Operation Manual ▷ View online
Inserting a CA Card
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set. (Page 8)
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealer.
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set. (Page 8)
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealer.
Inserting the CA Card into the CI Module
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
Remove the rear terminal cover.
Carefully insert the CI Module in the CI slot with
the contact side forward.
the contact side forward.
The logo on the CI Module
must be facing forward from
the rear of the TV. Do not use
excessive force. Make sure
the module is not bent in the
process.
must be facing forward from
the rear of the TV. Do not use
excessive force. Make sure
the module is not bent in the
process.
1
2
3
Checking CI Module information
NOTE
• Make sure that the CI Module is properly inserted.
• This menu is only available for digital stations.
• Make sure that the CI Module is properly inserted.
• This menu is only available for digital stations.
Press MENU and the menu screen displays.
Press
c/d to select “Digital Setup”.
• The content of this menu depends on the provider of
the CI Module.
Press
a/b to select “CI Menu”, and then press
OK.
Press
a/b to select the following desired item,
and then press OK.
1
2
2
3
4
Connecting external devices
E
Module
General information on CI Module displays.
E
Menu
Adjustment parameters of each CA CARD displays.
E
Enquiry
You can input numerical values such as passwords
here.
here.
NOTE
• The content of each screen depends on the
• The content of each screen depends on the
manufacturer of the CI module.
Removing the CI Module
Remove the cover from the rear of
the set.
the set.
Remove the module from the set.
Replace the cover.
1
2
3
3
19
LC-42XL2E-gb.indd 19
LC-42XL2E-gb.indd 19
2007/09/04 15:57:28
2007/09/04 15:57:28
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can
interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc device)
using a single remote control.
Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can
interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc device)
using a single remote control.
NOTE
• AQUOS LINK-compatible AQUOS BD Player, AQUOS AUDIO speaker system and AQUOS
• AQUOS LINK-compatible AQUOS BD Player, AQUOS AUDIO speaker system and AQUOS
Recorder are to be on sale after the release of this TV. (As of September 2007)
What you can do with AQUOS LINK
✔ One Touch Recording (DTV only)
You do not have to search for the remote control of your recording device. Press the REC
E or REC STOP H buttons inside the flip cover to start/stop recording what you see on
the recorder.
E or REC STOP H buttons inside the flip cover to start/stop recording what you see on
the recorder.
✔ One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from
the HDMI source.
the HDMI source.
✔ Single remote control operation
The AQUOS LINK automatically recognises the connected HDMI device and you can
control the TV and the devices as if using a universal remote control.
control the TV and the devices as if using a universal remote control.
✔ Operating Title list of external devices
In addition to displaying the TV’s own Timer list (Page 12), you can also call up the
external player’s Top menu or AQUOS BD Player’s/AQUOS Recorder’s Title list provided
that the devices support AQUOS LINK.
external player’s Top menu or AQUOS BD Player’s/AQUOS Recorder’s Title list provided
that the devices support AQUOS LINK.
✔ Multiple control of HDMI devices
You can select which HDMI device to operate using the OPTION button.
NOTE
• Point the remote control toward the TV, not to the connected HDMI device.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified
• Point the remote control toward the TV, not to the connected HDMI device.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified
HDMI cable.
• Up to 3 HDMI recording devices, one AV amplifier and two players can be connected using this
system.
• These operations affect the HDMI device selected as the current external source. If the device
does not operate, turn on the device and select the appropriate external source using
b.
• When you insert/remove HDMI cables or change connections, turn on all connected HDMI
devices before turning on the TV. Confirm that picture and audio are correctly output by selecting
“EXT4”, “EXT5” or “EXT6” from the INPUT SOURCE menu.
“EXT4”, “EXT5” or “EXT6” from the INPUT SOURCE menu.
AQUOS LINK
20
LC-42XL2E-gb.indd 20
LC-42XL2E-gb.indd 20
2007/09/04 15:57:28
2007/09/04 15:57:28
Connecting an AQUOS BD
Player/AQUOS Recorder only
Player/AQUOS Recorder only
HDMI cable
AQUOS AUDIO
speaker system
Connecting an AQUOS BD Player/AQUOS Recorder via the
AQUOS AUDIO speaker system
AQUOS AUDIO speaker system
HDMI cable
AQUOS BD Player/
AQUOS Recorder
AQUOS Recorder
HDMI cable
Optical AUDIO
cable
cable
AQUOS LINK
AQUOS LINK Auto power on
If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Press MENU and the menu screen displays.
Press
c/d to select “Option”.
Press
a/b to select “AQUOS LINK Setup”, and
then press OK.
Press
a/b to select “Auto Power On”, and
then press OK.
Press
c/d to select “On”, and then press OK.
NOTE
• The factory default for this item is “Off”.
• The factory default for this item is “Off”.
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
several connected recorders.
1
2
3
2
3
4
5
Repeat steps 1 to 3 in AQUOS LINK Auto
power on.
power on.
Press
a/b to select “Selecting Recorder”, and
then press OK.
Select the recorder, and then press OK.
NOTE
• If you have connected the AQUOS AUDIO speaker system
• If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS Recorder, the external
source’s indication changes from “EXT5” to “EXT5 (Sub)”.
source’s indication changes from “EXT5” to “EXT5 (Sub)”.
Using Genre Info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included the digital broadcast.
the appropriate sound mode depending on the genre
information included the digital broadcast.
Repeat steps 1 to 3 in AQUOS LINK Auto
power on.
power on.
Press
a/b to select “Using Genre Info.”, and
then press OK.
Press
c/d to select “On”, and then press OK.
1
2
3
1
2
3
AQUOS LINK Setup
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD Player/AQUOS Recorder that supports the
HDMI CEC protocol.
HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, first turn on the power of the TV with all relevant
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, first turn on the power of the TV with all relevant
device’s power turned on. Change the external input source by pressing
b, select the appropriate external source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
AQUOS BD Player/
AQUOS Recorder
AQUOS Recorder
21
LC-42XL2E-gb.indd 21
LC-42XL2E-gb.indd 21
2007/09/04 15:57:28
2007/09/04 15:57:28
AQUOS LINK
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
connected device with one remote control.
Open the remote control’s flip cover.
Press PLAY
I to start playback of a title.
• See the right column, section “Playback of titles
using AQUOS LINK
” if you want to start playback
using the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
AQUOS Recorder.
Press FWD
J to fast forward.
Press
REV
G to reverse.
Press
STOP
H to stop.
Press
B to turn the HDMI-connected device
on/off.
Listening with the AQUOS AUDIO speaker
system
system
You can opt to listen to the TV sound only from the
AQUOS AUDIO speaker system.
AQUOS AUDIO speaker system.
Open the remote control’s flip cover.
Press OPTION.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
Press
a/b to select “By AQUOS AUDIO SP”,
and then press OK.
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS AUDIO speaker system is audible.
AQUOS AUDIO speaker system is audible.
Listening with the AQUOS TV speaker
system
system
You can opt to listen to the TV sound only from the
AQUOS TV speaker system.
AQUOS TV speaker system.
Open the remote control’s flip cover.
Press OPTION.
• The AQUOS LINK Menu displays.
Press
a/b to select “By AQUOS SP”, and then
press OK.
Manually changing the AQUOS AUDIO
speaker system’s sound mode
speaker system’s sound mode
Open the remote control’s flip cover.
Press OPTION.
• The AQUOS LINK Menu displays.
Press
a/b to select “Sound mode change”.
The sound mode changes every time you press
OK.
OK.
• Refer to the operation manual of the AQUOS AUDIO
speaker system for details.
1
2
2
3
1
2
2
3
1
2
2
3
1
2
2
3
4
4
Playback of titles using AQUOS LINK
This section explains how to play back a title in the
AQUOS BD Player/AQUOS Recorder.
AQUOS BD Player/AQUOS Recorder.
Open the remote control’s flip cover.
Press OPTION.
• The AQUOS LINK Menu displays.
Press
a/b to select “Top Menu/Title List”, and
then press OK.
• The linked recorder now powers on and the TV
automatically selects the appropriate external input
source.
source.
• The title list data from the connected AQUOS BD
Player/AQUOS Recorder displays.
Select the title with
a/b/c/d, and then press
PLAY
I.
Selecting media type for CEC-compatible
recorder
recorder
If your recorder has multiple storage media, select the
media type here.
media type here.
Open the remote control’s flip cover.
Press OPTION.
• The AQUOS LINK Menu displays.
Press
a/b to select “Media change”, and then
press OK.
Select the desired medium, such as DVD or
HDD. The media type changes every time you
press OK.
HDD. The media type changes every time you
press OK.
HDMI device selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
chain, you can specify which device to control here.
Open the remote control’s flip cover.
Press OPTION.
• The AQUOS LINK Menu displays.
Press
a/b to select “Model select”, and then
press OK. The HDMI device changes every time
you press OK.
you press OK.
Recording via the AQUOS Recorder EPG
(only for recorders)
(only for recorders)
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
and preset timer recordings using the TV’s remote
control.
Open the remote control’s flip cover.
Press OPTION.
• The AQUOS LINK Menu displays.
Press
a/b to select “Recorder EPG”, and then
press OK.
• The external input source switches and the recorder’s
EPG is displayed.
Select the programme to record.
• Refer to the operation manual of the recorder for
details.
1
2
2
3
4
1
2
2
3
4
1
2
2
3
1
2
2
3
4
22
LC-42XL2E-gb.indd 22
LC-42XL2E-gb.indd 22
2007/09/04 15:57:28
2007/09/04 15:57:28
Click on the first or last page to see other LC-42XL2E (serv.man10) service manuals if exist.