Sharp LC-42XL2E (serv.man10) User Manual / Operation Manual ▷ View online
Connecting external devices
E
Before connecting ...
• Be sure to turn off the TV and any devices before making any connections.
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external device for possible connection types. This also helps you
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external device for possible connection types. This also helps you
get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
Introduction to connections
The TV is equipped with the terminals as showed below. Find the cable corresponding the TV’s terminal and
connect the device.
connect the device.
NOTE
• The cables illustrated in pages 15 to 18 are commercially available items.
• The cables illustrated in pages 15 to 18 are commercially available items.
HDMI device
(Page 16)
Game console or
camcorder (Page 16)
Video recording device
(Pages 16 and 17)
HDMI Cable
DVI/HDMI Cable
ø 3.5 mm stereo minijack cable
S-video cable
*
AV cable
*
Audio cable
Component cable
SCART cable
or
Audio cable
or
Optical audio cable
Audio device
(Page 18)
or
* When using an S-video cable, you also need to connect an audio cable (R/L).
15
LC-42XL2E-gb.indd 15
LC-42XL2E-gb.indd 15
2007/09/04 15:57:27
2007/09/04 15:57:27
HDMI connection
Connecting external devices
The HDMI connections (High Definition Multimedia
Interface) permit digital video and audio transmission
via a connection cable from a player/recorder. The
digital picture and sound data are transmitted without
data compression and therefore lose none of their
quality. Analogue/digital conversion is no longer
necessary in the connected devices, which also would
result in quality losses.
Interface) permit digital video and audio transmission
via a connection cable from a player/recorder. The
digital picture and sound data are transmitted without
data compression and therefore lose none of their
quality. Analogue/digital conversion is no longer
necessary in the connected devices, which also would
result in quality losses.
DVI/HDMI conversion
Using an DVI/HDMI adapter cable, the digital video
signals of a DVD can also be played via the compatible
HDMI connection. The sound must be fed in
additionally.
Using an DVI/HDMI adapter cable, the digital video
signals of a DVD can also be played via the compatible
HDMI connection. The sound must be fed in
additionally.
Both HDMI and DVI use the same HDCP copy
protection method.
protection method.
NOTE
• If a connected HDMI device is AQUOS LINK compatible, you
• If a connected HDMI device is AQUOS LINK compatible, you
can take advantage of versatile functions. (Pages 20 - 22)
• Video noise may occur depending on the type of HDMI
cable used. Make sure to use certified HDMI cable.
• When playing the HDMI image, the best possible format for
the picture will be detected and set automatically.
Supported video signal:
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 36 for PC signal compatibility.
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 36 for PC signal compatibility.
You will enjoy accurate colour reproduction and
high quality images through the EXT 8 terminal
when connecting a DVD recorder or other recording
equipment.
high quality images through the EXT 8 terminal
when connecting a DVD recorder or other recording
equipment.
Y
P
B
(
C
B)
L
R
P
R
(
C
R)
COMPONENT
AUDIO
Example of connectable devices
E VCR E DVD E Blu-ray player/recorder
Example of connectable devices
E DVD E Blu-ray player/recorder
Component connection
Y
P
B
(
C
B)
P
R
(
C
R)
You can use the EXT 3 terminal when connecting to a
game console, camcorder, a DVD recorder and some
other equipment.
game console, camcorder, a DVD recorder and some
other equipment.
NOTE
• When using an S-video cable, you also need to
• When using an S-video cable, you also need to
connect an audio cable (R/L).
• EXT3: The S-VIDEO terminal has priority over the VIDEO
terminal.
Example of connectable devices
E VCR E DVD E Blu-ray player/recorder
E Game console E Camcorder
E Game console E Camcorder
S-VIDEO/VIDEO connection
or
DVI/HDMI adapter cable
ø 3.5 mm stereo minijack
cable
cable
HDMI cable
Audio cable
Component
cable
cable
or
AV cable
S-video cable
E
After connecting
HDMI Audio Select
After connecting, you must set the audio signal
compatible with the cable you use for the HDMI
device.
compatible with the cable you use for the HDMI
device.
Go to MENU > Option > HDMI Audio Select
Select “Digital” for audio signals via the
HDMI terminal. Select “Analogue” for audio
signals via the AUDIO jack (EXT6).
HDMI terminal. Select “Analogue” for audio
signals via the AUDIO jack (EXT6).
1
2
2
16
LC-42XL2E-gb.indd 16
LC-42XL2E-gb.indd 16
2007/09/04 15:57:27
2007/09/04 15:57:27
SCART connection
Connecting external devices
E
When using the EXT 1 (SCART) terminal
E
When using the EXT 2 (SCART) terminal
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using a fully wired
SCART cable.
systems, you can connect the VCR using a fully wired
SCART cable.
Controlling devices with SCART using AV Link
This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual
equipment.
equipment.
One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source
(e.g. VCR, DVD).
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source
(e.g. VCR, DVD).
TV Standby
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD) enters standby mode
as well.
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD) enters standby mode
as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2 terminal.
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2 terminal.
NOTE
• Refer to the operation manuals of external equipment the details.
• Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired
• Refer to the operation manuals of external equipment the details.
• Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired
SCART.
• The use of the AV Link function is only possible if the TV-set has enforced a complete auto installation with the connected
audiovisual equipment. (Page 9, initial auto installation)
The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type
of equipment used, it is possible that the described functions may be completely or partially unusable.
Example of connectable devices
E Decoder
Example of connectable devices
E VCR E DVD recorder
NOTE
• In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which
• In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which
the decoder is connected in “Manual adjust” in the “Analogue Setting” menu. (Page 27)
• TV-VCR advanced AV Link systems may not be compatible with some external sources.
• Do not connect the decoder to the EXT2 terminal.
• You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting “Y/C” under the EXT2 in the
• Do not connect the decoder to the EXT2 terminal.
• You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting “Y/C” under the EXT2 in the
“Input Select” menu.
SCART cable
Decoder
SCART cable
SCART cable
Decoder
VCR
17
LC-42XL2E-gb.indd 17
LC-42XL2E-gb.indd 17
2007/09/04 15:57:27
2007/09/04 15:57:27
Connecting external devices
DIGITAL AUDIO IN
L
R
AUX1 IN
L
R
AUX OUT
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
E
Connecting an amplifier with analogue
audio input
E
Connecting an amplifier with digital audio
input
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input
and external speakers as shown, you should set an
audio output format compatible with the programme
you are watching or the device connected.
and external speakers as shown, you should set an
audio output format compatible with the programme
you are watching or the device connected.
Go to MENU > Option > Digital Audio Output
> select “PCM” or “Dolby Digital”
Optical AUDIO
cable
cable
Audio cable
18
Amplifier with
analogue audio input
Amplifier with
digital audio input
LC-42XL2E-gb.indd 18
LC-42XL2E-gb.indd 18
2007/09/04 15:57:27
2007/09/04 15:57:27
Click on the first or last page to see other LC-42XL2E (serv.man10) service manuals if exist.