Sharp LC-42XD1EA (serv.man2) Service Manual ▷ View online
LC-42XD1EA/RUA
2 – 1
LC42XD1EA
Service Manual
CHAPTER 2.
REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS
1. Remove the 12 lock screws
, 4 lock screw
and the 4 lock screws
. Detach the Rear Cabinet.
2. Remove the 2 lock screws
and 1lock screw
and detach the Stand Assist Angle.
3. Remove the 4 lock screws
and detach the Bottom Cover.
1
2
3
REAR CABNET
1
2
3
4
6
5
STAND ASSIST ANGLE
BOTTOM COVER
Set to Angle this direction.
4
5
6
LC-42XD1EA/RUA
2 – 2
4. Remove the 4 lock screws
and detach the Center Angle.
5. Remove the 4 lock screws
and detach the Stangl Angle.
6. Remove the 4 lock screws
and detach theStandl Fix Angle.
7
8
CENTER ANGLE
CENTER ANGLE
STAND ANGLE
8
7
9
9
STAND FIX ANGLE
LC-42XD1EA/RUA
2 – 3
7. Remove the 5 lock screws
nad 1 lock screw
and detach the Full Shield.
8. Remove all the connectors from PWBs.
10
11
Wire "KM" to WH
< CAUTIONS >
# Do Not sandwich wire "RA","SP"
< CAUTIONS >
# Do Not sandwich wire "KM"
INSULATION TAPE
FULL SHIELD
10
11
TOP COVER
No Screw
Wire "KM"
LC-42XD1EA/RUA
2 – 4
9. Remove the 4 lock screws
and detach the Speaker L & R.
10.Remove all the connectors from PWBs.
12
Top side
SPEAKER L& R
12
Wire "SP" to pin
Wire "SP L , R "
Wire "SP" to pin
Wire "SP" to pin
Wire "SP" to pin
Never overlap the boss by wire
SPEAKER L& R
SPEAKER L& R
Display
