DOWNLOAD Sharp LC-42LE761K Service Manual ↓ Size: 37.82 MB | Pages: 127 in PDF or view online for FREE

Model
LC-42LE761K
Pages
127
Size
37.82 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD
File
lc-42le761k.pdf
Date

Sharp LC-42LE761K Service Manual ▷ View online

53
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
25 
 
 
 
54
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
26 
 
 
 
 
 
55
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
28
Table: Recommended operating conditions.
6. VIDEO BACK-END PROCESSOR (MSTAR)
MST7388R
a) General Description
Table: Recommended operating conditions.
          5.  VIDEO BACK-END PROCESSOR (MSTAR)
56
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
29
b) Features 
30
c) Block Diagram
Figure: Block diagram.
7. 1Gb DDR3 SDRAM
Hynix H5TQ1G630FA
a) Description
The H5TQ1G6(8)3DFR-xxx  series are a 1,073,741,824-bit CMOS  Double Data Rate  III 
(DDR3)  Synchronous  DRAM,  ideally  suited  for  the  main  memory  applications  which 
requires large memory density and high bandwidth. Hynix 1Gb DDR3 SDRAMs offer fully 
synchronous  operations  referenced  to  both  rising  and  falling  edges  of  the  clock.  While  all 
addresses and control inputs are latched on the rising edges of the CK (falling edges of the 
CK), Data, Data strobes and Write data masks inputs are sampled on both rising and falling 
edges of it. The data paths are internally pipelined and 8-bit prefetched to achieve very high 
bandwidth.
b) Features
• DQ Power & Power supply : VDD & VDDQ = 1.5V +/- 0.075V 
• DQ Ground supply : VSSQ = Ground
• Fully differential clock inputs (CK, CK) operation 
• Differential Data Strobe (DQS, DQS) 
• On chip DLL align DQ, DQS and DQS transition with CK transition 
• DM masks write data-in at the both rising and falling edges of the data strobe 
•  All  addresses  and  control  inputs  except  data, data  strobes and  data  masks  latched on  the
rising edges of the clock 
• Programmable CAS latency 6, 7, 8, 9, 10, 11, 12, 13 and 14 supported 
• Programmable additive latency 0, CL-1, and CL-2 supported 
• Programmable CAS Write latency (CWL) = 5, 6, 7, 8, 9, 10
• Programmable burst length 4/8 with both nibble sequential and interleave mode 
• Programmable PASR(Partial Array Self-Refresh) for Digital consumer Applications.
• Programmable BL=4 supported (tCCD=2CLK) for Digi-tal consumer Applications.
• Programmable ZQ calibration supported
• BL switch on the fly 
• 8banks 
29
b) Features 
Page of 127
Display

Click on the first or last page to see other LC-42LE761K service manuals if exist.