Sharp LC-42LD266K (serv.man3) Service Manual ▷ View online
41
LC-42LD264
LC-42LD265
LC-42LD266
LC-42LD265
LC-42LD266
10.1
Introduction
Before you start to upgrade new code, we suggest you setup the environment first.
This chapter lists setup requirements, guides you to setup your environment.
10.2
Connect to ISP Board to upgrade the boot loader.
Use USB cable connecting PC & ISP board and use UART/HDMI cable connecting
ISP board & MTK Board.
Unzip USB2COM Driver .zip to C:\
I. PL2303_Prolific_DriverInstaller_v1.7.0.exe
II. Double click exe file to install driver.
II. Double click exe file to install driver.
Unzip FlashTool .zip to C:\
USB Cable
Use Desktop PC or Notebook
USB Port
USB Port
ISP Board
(USB to UART/HDMI)
(USB to UART/HDMI)
UART
/HDMI
/HDMI
MT5561
Board
42
LC-42LD264
LC-42LD265
LC-42LD266
LC-42LD265
LC-42LD266
Example :
1. PC Connected to ISP board (By USB cable).
2. a) Method one: ISP board connected to TV (By UART cable).
Or b) Method two: ISP board connected to TV (By HDMI cable).
I. Double click FlashTool.exe to start.
II. Set (MT53XX RS232 COM_Port 115200 Connect FW_Upgrade
II. Set (MT53XX RS232 COM_Port 115200 Connect FW_Upgrade
Nor Flash
).
(Hint: In above
RED
highlight section, if your TV is SHARP_EU &
SHARP_EU_2G you must select Nor Flash, and if your TV is SHARP_UK, you
must select Nand Flash)
must select Nand Flash)
43
LC-42LD264
LC-42LD265
LC-42LD266
LC-42LD265
LC-42LD266
III. Please select (
*_loader.bin
) to Upgrade.
(Hint: If your TV is SHARP_UK, you must enter “ef” command in the “Load Bin
File” field and Click ‘Upgrade’ button to erase Nand Flash memory at first, and
next step to select
File” field and Click ‘Upgrade’ button to erase Nand Flash memory at first, and
next step to select
*_loader.bin
to Upgrade)
IV. Finish Upgrade.
44
LC-42LD264
LC-42LD265
LC-42LD266
LC-42LD265
LC-42LD266
10.3
Connect to TV USB port to upgrade the software firmware
Please follow the following steps to upgrade the firmware.
I. Copy *.pkg file to USB drive at root directory.
II. Insert the USB drive to TV USB port.
III. TV
AC power off AC power on
IV. TV will upgrade by detecting the correct *.pkg file.
Hint:
TV detects the
RED
prefix text of *.pkg file name to judge different models, the following is
different models prefix text.
{X|*
=}!
Click on the first or last page to see other LC-42LD266K (serv.man3) service manuals if exist.