Sharp LC-40LE820E (serv.man5) Service Manual ▷ View online
LC-40/46/52LE820E, LC-40/46LU820E
7 – 9
[External input EXT2] No picture on the display (7)
Does not the picture of the CVBS signal input to EXT2 go out?
Is a CVBS signal input to pin (3) of EXT8 (J505)?
NO
Check the setting of an external input device that connects with
EXT2.
EXT2.
YES
Is CVBS signal sent to pin (AE29/CVBS_IN) of IC3302?
NO
Check the line between J505 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”
[External input EXT3] No picture on the display (8)
Does not the picture of the component video signal input to EXT3 (15pin-D-SUB terminal) go out?
Is it selected “Component” by the Audio setup under Menu-
Setup-Option-Input terminal setting - Input select?
NO
Set the “Component”.
YES
Is a COMPONENT video signal input to pins (1)/PC_R_COM,
(2)/PC_G_COM, (3)/PC_B_COM of EXT3 (SC501)?
(2)/PC_G_COM, (3)/PC_B_COM of EXT3 (SC501)?
NO
Check the setting of an external input device that connects with
EXT3.
EXT3.
YES
Is COMPONENT signal sent to pins (AJ17/PC_R_CM), (AJ16/
PC_G_CM) and (AJ15/PC_B_CM) of IC3302?
PC_G_CM) and (AJ15/PC_B_CM) of IC3302?
NO
Check the line between SC501 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”
[External input EXT3] No picture on the display (9)
Does not the picture of the DVI (ANALOG) video signal input to EXT3 (15pin-D-SUB terminal) go out?
Is it selected “PC (RGB)” by the Audio setup under Menu-Setup-
Option-Input terminal setting - Input select?
NO
Set the “PC (RGB)”.
YES
Are the video signal and the synchronized signal input from pin
(1, 2, 3)/(PC_R, G, B), (14 and 13)/(V, H.Sync) of EXT4 (SC501)?
(1, 2, 3)/(PC_R, G, B), (14 and 13)/(V, H.Sync) of EXT4 (SC501)?
NO
Check the connection and setup with the external DVI devices.
YES
Are the video signal and the synchronized signal input from pins
(AK17/PC__R) (AK16/PC__G) (AH15/PC__B) and (AK14/
PC_HSYNC) (AJ14/PC_VSYNC) of IC3302 (Digital AV decode &
Main CPU)?
(AK17/PC__R) (AK16/PC__G) (AH15/PC__B) and (AK14/
PC_HSYNC) (AJ14/PC_VSYNC) of IC3302 (Digital AV decode &
Main CPU)?
NO
Check the line between SC501 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”
LC-40/46/52LE820E, LC-40/46LU820E
7 – 10
[External input HDMI-1/2/3/4] No picture on the display (10)
Does not the picture/sound of the HDMI signal input to HDMI-1/2/3/4 go out?
Is the Hot plug detection function output from pin (19) of the
HDMI-1 (SC1503) normal?
NO
Check the line between SC1503 and pin (45) of IC1504 (HDMI-
SW).
SW).
Is the Hot plug detection function output from pin (19) of the
HDMI-2 (SC1502) normal?
HDMI-2 (SC1502) normal?
NO
Check the line between SC1502 and pin (41) of IC1504 (HDMI-
SW).
SW).
Is the Hot plug detection function output from pin (19) of the
HDMI-3 (SC1501) normal?
HDMI-3 (SC1501) normal?
NO
Check the line between SC1501 and pin (35) of IC1504 (HDMI-
SW).
SW).
Is the Hot plug detection function output from pin (19) of the
HDMI-4 (SC1505) normal?
HDMI-4 (SC1505) normal?
NO
Check the line between SC1505 and pin (31) of IC1504 (HDMI-
SW).
SW).
YES
NO
Check the setting of an external input device that connects with
HDMI-1/2/3/4.
HDMI-1/2/3/4.
Is EDID data pins (44/HDMI1_SCL), (43/HDMI1_SDA) of IC1504
accessed, and is it read from pins (15, 16) of a HDMI-1
(SC1503)?
accessed, and is it read from pins (15, 16) of a HDMI-1
(SC1503)?
NO
Is access possible in the exchange of IC1504?
Is EDID data pins (40/HDMI2_SCL), (39/HDMI2_SDA) of IC1504
accessed, and is it read from pins (15, 16) of a HDMI-2
(SC1502)?
accessed, and is it read from pins (15, 16) of a HDMI-2
(SC1502)?
NO
Is EDID data pins (34/HDMI3_SCL), (33/HDMI3_SDA) of IC1504
accessed, and is it read from pins (15, 16) of a HDMI-3
(SC1501)?
accessed, and is it read from pins (15, 16) of a HDMI-3
(SC1501)?
Check the peripheral circuit of SC1502/1503/1505/1501and
IC1504.
IC1504.
Is EDID data pins (30/HDMI3_SCL), (29/HDMI3_SDA) of IC1504
accessed, and is it read from pins (15, 16) of a HDMI-4
(SC1505)?
accessed, and is it read from pins (15, 16) of a HDMI-4
(SC1505)?
YES
Is TMDS signal input into pins (20, 19/HDMI1_CLKP/N), (22,21/
HDMI1_D0P/N), (24, 23/HDMI1_D1P/N), (26, 25/HDMI1_D2P/N)
of IC1504 from HDMI-1 (SC1503)?
HDMI1_D0P/N), (24, 23/HDMI1_D1P/N), (26, 25/HDMI1_D2P/N)
of IC1504 from HDMI-1 (SC1503)?
NO
Check the line between HDMI-1 (SC1503) and IC1504.
Is TMDS signal input into pins (12, 11/HDMI2_CLKP/N), (14, 13/
HDMI2_D0P/N), (16, 15/HDMI2_D1P/N), (18, 17/HDMI2_D2P/N)
of IC1504 from HDMI-2 (SC1502)?
HDMI2_D0P/N), (16, 15/HDMI2_D1P/N), (18, 17/HDMI2_D2P/N)
of IC1504 from HDMI-2 (SC1502)?
NO
Check the line between HDMI-2 (SC1502) and IC1504.
Is TMDS signal input into pins (2, 1/HDMI3_CLKP/N), (4, 3/
HDMI3_D0P/N), (6, 5/HDMI3_D1P/N), (8, 7/HDMI3_D2P/N) of
IC1504 from HDMI-3 (SC1501)?
HDMI3_D0P/N), (6, 5/HDMI3_D1P/N), (8, 7/HDMI3_D2P/N) of
IC1504 from HDMI-3 (SC1501)?
NO
Check the line between HDMI-3 (SC1501) and IC1504.
Is TMDS signal input into pins (66, 65/HDMI4_CLKP/N), (68, 67/
HDMI4_D0P/N), (70, 69/HDMI4_D1P/N), (72, 71/HDMI4_D2P/N)
of IC1504 from HDMI-4 (SC1505)?
HDMI4_D0P/N), (70, 69/HDMI4_D1P/N), (72, 71/HDMI4_D2P/N)
of IC1504 from HDMI-4 (SC1505)?
NO
Check the line between HDMI-4 (SC1505) and IC1504.
YES
Are TMDS_Rx and the I2C_SINK signal output from IC1504
respectively?
Pins (62, 63/SW_TMDS_CLKP/N), (60, 61/SW_TMDS_D0P/N),
(58, 59/SW_TMDS_D1P), (56, 57/SW_TMDS_D2P)
respectively?
Pins (62, 63/SW_TMDS_CLKP/N), (60, 61/SW_TMDS_D0P/N),
(58, 59/SW_TMDS_D1P), (56, 57/SW_TMDS_D2P)
NO
Check the IC1504 and peripheral circuits.
YES
Is the TMDS_Rx/ I2C_SINK signal input to IC3302 (Digital AV
decode & Main CPU)?
Pins (AK6, AJ6/SW_TMDS_CLKP/N), (AK7, AJ7/
SW_TMDS_D0P/N), (AK8, AJ8/SW_TMDS_D1P/N), (AK9, AJ9/
SW_TMDS_D2P/N) from IC1504
decode & Main CPU)?
Pins (AK6, AJ6/SW_TMDS_CLKP/N), (AK7, AJ7/
SW_TMDS_D0P/N), (AK8, AJ8/SW_TMDS_D1P/N), (AK9, AJ9/
SW_TMDS_D2P/N) from IC1504
NO
Check the line between IC1504 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.” or “No sound
output in all modes.”
output in all modes.”
LC-40/46/52LE820E, LC-40/46LU820E
7 – 11
<During external connection> No picture on the monitor
No picture appears on EXT1connected monitor during the ATV/DTV reception.
Is CVBS signal output into pin (2) of EXT1 (SC505)?
YES
Check the setting of an external input device that connects with
EXT1.
EXT1.
NO
Is CVBS signal output to pin (2) of IC504?
YES
Check the line between SC505 and IC504.
NO
Is TU_OUT_CVBS_MUTE [pin (1) of IC504] at “H”?
YES
Check the peripheral circuits of IC3302.
NO
Is CVBS signal input to pin (6) of IC504?
YES
Check the IC504 and their peripheral circuits.
NO
Is CVBS signal output to pin (A27) of IC3302 (Digital AV decode
& Main CPU)?
& Main CPU)?
YES
Check the line between IC504 and IC3302.
NO
In the case that No picture appears on EXT1connected monitor during the ATV reception., refer to (A)
In the case that No picture appears on EXT1connected monitor during the DTV reception., refer to (B)
In the case that No picture appears on EXT1connected monitor during the DTV reception., refer to (B)
(A)
(B)
Refer to “No picture on the display (2)”
Refer to “No picture on the display (3)”
[External input Network] No picture on the display
Does not the signal input to Network go out?
Does the signal in/output to pins (1), (2), (3), (4) of LAN-jack
(J9501)?
NO
Check the interface device and peripheral circuits. (power-LED of
hub, LINK-LED of hub)
hub, LINK-LED of hub)
YES
Does the signal in/out to pins (12, 11/TX+-), (10, 9/RX+-) of
IC9501?
IC9501?
NO
Check the line between J9501 and IC9501.
YES
Does the signal in/output to pins [18, 19, 47, 29, 41, 27, 23, 22/
ONDA6~13], [21, 20, 35, 36, 38, 39, 34/ONDD8~14], [28, 33/
N_ONDCE0, N_ONDCE1] of LAN-jack (J9501)?
ONDA6~13], [21, 20, 35, 36, 38, 39, 34/ONDD8~14], [28, 33/
N_ONDCE0, N_ONDCE1] of LAN-jack (J9501)?
NO
Check IC9501 and its peripheral circuits.
YES
Does the signal in/output to pins [A8, B8, C9, C8, A7, F10, A4,
B4/ONDA6~13], [D13, F13, D11, E11, F12, E12, E13/
ONDD8~14], [C6, B3/N_ONDCE0, N_ONDCE1] of IC3302 (Digi-
tal AV decode & Main CPU)?
B4/ONDA6~13], [D13, F13, D11, E11, F12, E12, E13/
ONDD8~14], [C6, B3/N_ONDCE0, N_ONDCE1] of IC3302 (Digi-
tal AV decode & Main CPU)?
NO
Check the line between X9501 and IC9501.
Check the crystal X9501. (SCA219WJ)
Check the crystal X9501. (SCA219WJ)
YES
Check IC9501 and its peripheral circuits.
LC-40/46/52LE820E, LC-40/46LU820E
7 – 12
No light (Back Light doesn't light)
Is the AC cord connector tightly connected to the set?
NO
Reconnect the AC cord tightly and turn on the power again.
YES
Are the wire harnesses and other cables properly connected in
the set?
the set?
NO
Reconnect the wire harnesses and other cables properly in the
set.
set.
YES
Does Power starts up (central Icon LED lights up)?
NO
Refer to “No power (central Icon LED failure to light up) or no
startup (central Icon LED failure is flashing)”
startup (central Icon LED failure is flashing)”
YES
Is there the pins (12/PNL_POW) of P9601 at “H”?
NO
Check the power unit, and the signal line between PNL_POW
and IC3302.
and IC3302.
YES
Is there the pins (8/STB) of P9602 at “H”?
NO
Check the power unit, and the signal line between STB and
IC2002.
IC2002.
YES
Replace the power unit.
LCD Panel failure (1)
Does a single or
several vertical
stripes appear on
the LCD screen?
several vertical
stripes appear on
the LCD screen?
Does a single or sev-
eral horizontal stripes
appear on the LCD
screen?
eral horizontal stripes
appear on the LCD
screen?
Do luminescent or
black dots appear
on the screen?
black dots appear
on the screen?
Is the on-screen
image rippling or
distorted?
image rippling or
distorted?
Is there any portion
which some
screens were dark-
ish or became
whitish?
which some
screens were dark-
ish or became
whitish?
Does all LED of
one line are not
lighting?
one line are not
lighting?
Replace the LCD panel or the power unit.
LCD Panel failure (2)
The backlight func-
tions. Does not the
image come out in the
LCD screen (screen
black)?
tions. Does not the
image come out in the
LCD screen (screen
black)?
Does the entire LCD
screen look whitish all
over?
screen look whitish all
over?
Does the QS drive func-
tion?
tion?
Are the data bit drop-
out? (No solution even
when turning on and off
the QS drive)
out? (No solution even
when turning on and off
the QS drive)
Is the gamma correc-
tion as specified?
tion as specified?
Replace the LCD_CONT_UNIT.
Click on the first or last page to see other LC-40LE820E (serv.man5) service manuals if exist.