Sharp LC-40LE600E (serv.man13) User Manual / Operation Manual ▷ View online
19
Audio
Audio Description
Available only when you set “Audio Description” in the
“Type” menu above.
“Type” menu above.
Item
Speaker
When set to “On”, audio for the visually
impaired is output from the TV speakers.
impaired is output from the TV speakers.
Headphone
When set to “On”, audio for the visually
impaired is output from the headphone
terminal.
impaired is output from the headphone
terminal.
Volume
Adjust the volume of the speakers or
headphones.
headphones.
Setting audio input
Option
PC Audio Select
When using the EXT 4 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
Item
HDMI 2
When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack*.
PC) with DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack*.
EXT 4 (RGB)
When connecting a PC to the EXT 4
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
HDMI signals have priority when the signal includes audio.
NOTE
You must set this to “EXT 4 (RGB)” when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI 2” is set, there will be no sound output.
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI 2” is set, there will be no sound output.
Automatic volume adjustment
Option
Auto Volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control (Auto
Volume) reduces this problem by equalizing levels.
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control (Auto
Volume) reduces this problem by equalizing levels.
*
•
Outputting audio only
Option
Audio Only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
can set the TV off and enjoy audio only.
Item
Off
Both screen images and audio are
output.
output.
On
Audio is output without a screen image.
AQUOS LINK Settings
Option
AQUOS LINK Control
Set to “On” to enable interactive operation of compatible
HDMI devices (DVD player/recorders, Blu-ray player/
recorders).
HDMI devices (DVD player/recorders, Blu-ray player/
recorders).
What you can do with AQUOS
LINK
LINK
One Touch Play
When the TV is in standby mode, it will automatically turn on
and play back the image from the HDMI source.
and play back the image from the HDMI source.
Controlling AQUOS LINK devices
using remote control unit
using remote control unit
AQUOS LINK allows you to operate the HDMI-connected
device with a single remote control unit.
device with a single remote control unit.
Buttons for AQUOS LINK operation
Buttons
Description
PLAY I
Starts playback.
FWD J
Scans forward.
REV G
Scans backward.
STOP H
Stops playback.
REC E
Records the programme being watched via
the recorder’s tuner.
the recorder’s tuner.
REC STOP H
Stops recording.
B
Turns the HDMI-connected device on/off.
NOTE
Open the remote control unit’s flip cover when using the
butttons above.
butttons above.
•
Basic adjustment
LC-LE600E_GB.indd 19
LC-LE600E_GB.indd 19
2009/07/14 14:38:58
2009/07/14 14:38:58
20
Power Save Settings
ECO
Energy Save
[Standard]
[On]
No Signal Off
ECO picture control
[Disable]
No Operation Off
[Disable]
ECO
ECO picture control
This function automatically detects the image source and
decreases the power consumption while keeping the
brightness of the image unchanged.
decreases the power consumption while keeping the
brightness of the image unchanged.
NOTE
This function does not work when “AV MODE” is set to
“DYNAMIC (Fixed)”.
This function does not work when “Energy Save” is set to
“Standard” or “Advanced”.
“DYNAMIC (Fixed)”.
This function does not work when “Energy Save” is set to
“Standard” or “Advanced”.
ECO
Energy Save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
Item
Off
The backlight brightness is the same
value of your settings in the selected
“AV MODE”.
value of your settings in the selected
“AV MODE”.
Standard
Reduces the backlight brightness.
Advanced
Reduces the backlight brightness more
than “Standard”.
than “Standard”.
NOTE
This function does not work when “AV MODE” is set to
“DYNAMIC (Fixed)”.
“DYNAMIC (Fixed)”.
“Energy Save” status icons
Icon
Description
“Energy Save” is set to “Standard”.
“Energy Save” is set to “Advanced”.
•
•
•
E
ECO
No Signal Off
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
standby mode if there is no signal input for 15 minutes.
ECO
No Operation Off
The TV will automatically enter standby mode if no
operations are performed during the time span you set
(“30 min.” or “3 hr.”).
operations are performed during the time span you set
(“30 min.” or “3 hr.”).
Channel Settings
Auto Installation
Setup
Auto Installation
The TV automatically detects and stores all available
channels in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
channels in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting “Yes” on the screen, you can
set language and channel search the same as
in the initial auto installation.
set language and channel search the same as
in the initial auto installation.
NOTE
PIN input is required when executing “Auto Installation”. The
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 24).
You cannot set the Home/Store setting and the country
setting in “Auto Installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
setting in “Auto Installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
Channel detail settings
Setup
Programme Setup
You can reconfigure the DTV/ATV channel settings
automatically or manually.
automatically or manually.
NOTE
PIN input is required when executing “Programme Setup”.
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 24).
•
•
•
Basic adjustment
LC-LE600E_GB.indd 20
LC-LE600E_GB.indd 20
2009/07/14 14:38:59
2009/07/14 14:38:59
21
Additional Search
Use this menu to add new channels automatically after
auto installation has been completed.
auto installation has been completed.
Manual Search
Add new services within a specified channel bandwidth.
NOTE
You can search the channel bandwidth by pressing
; after
setting the value for both “From Channel” and “To Channel”
using
using
c/d.
You can perform “Manual Search” with a service number only
when the four Nordic countries (Sweden, Norway, Finland or
Denmark) have been selected in the country setting (Page 9).
When another country has been selected, “Manual Search” is
not shown on the menu screen.
when the four Nordic countries (Sweden, Norway, Finland or
Denmark) have been selected in the country setting (Page 9).
When another country has been selected, “Manual Search” is
not shown on the menu screen.
Channel Edit
This menu allows you to reconfigure some settings for
the channel currently selected.
the channel currently selected.
Label
When a TV channel sends its Network Name, the “Auto
Installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Press
a/b/c/d to select each character of
the new name for the channel, and then press
;.
Repeat step 1 above until the name is fully
spelt out.
;.
Repeat step 1 above until the name is fully
spelt out.
NOTE
The name can be six characters or less.
If a channel name is less than six characters, select “END” to
set the channel name.
If a channel name is less than six characters, select “END” to
set the channel name.
Frequency
You can adjust the frequency to the desired position (only
for analogue channels).
for analogue channels).
NOTE
Adjust while checking the background picture as a reference.
You can set the frequency by pressing
You can set the frequency by pressing
c/d. Each time you
press
c or d, the value is changed in increments of 0.05 MHz.
Colour System
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”, “NTSC”) (only for analogue channels).
“PAL”, “SECAM”, “NTSC”) (only for analogue channels).
Sound System
Select the optimum sound systems (Broadcasting
systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”,
“A2 D/K1”, “A2 D/K2”, “I”, “L”, “L’”) (only for analogue
channels).
systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”,
“A2 D/K1”, “A2 D/K2”, “I”, “L”, “L’”) (only for analogue
channels).
•
•
1
2
•
•
•
•
•
•
Channel Skip
Channels with a
✔ mark are passed over when pressing
:r/s on the TV or remote control unit.
Press
a/b to select the desired channel.
Press
; to set a
✔ mark at the channel that
you want to skip.
Channel Sort
The item position of channels can be sorted.
Press
a/b to select the channel whose item
position you want to move, and then press
;.
;.
Channel Number
Channel Name
Channel Sort
Press
a/b to move it to the desired position,
and then press
;.
Channel Number
Channel Name
Channel Sort
Repeat steps 1 and 2 until all desired channel
items are sorted.
items are sorted.
Decoder
When connecting a decoder to the TV, you need to select
channels that need to be decoded.
channels that need to be decoded.
Channel Lock
When the channel is locked, you must enter your PIN
whenever you tune to the channel.
whenever you tune to the channel.
NOTE
See “Child Lock” for setting a PIN.
When “Channel Lock” is set for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child Lock” temporarily until the power is
turned off.
In case you select “Italy” in the country setting (Page 9), the PIN
input window displays every time you tune in to the channels
with “Channel Lock” applied.
When “Channel Lock” is set for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child Lock” temporarily until the power is
turned off.
In case you select “Italy” in the country setting (Page 9), the PIN
input window displays every time you tune in to the channels
with “Channel Lock” applied.
1
2
2
1
2
3
•
•
•
•
•
Basic adjustment
LC-LE600E_GB.indd 21
LC-LE600E_GB.indd 21
2009/07/14 14:39:00
2009/07/14 14:39:00
22
Password/Parental lock settings
Setup
Child Lock
Allows you to use a PIN to protect certain settings from
being accidentally changed.
being accidentally changed.
NOTE
PIN input is required when executing “Child Lock”. The default
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 24).
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 24).
Change PIN
Register a four-digit password number to use the “Child
Lock” function.
Lock” function.
Enter the four-digit number as a PIN using
0_9
0_9
numeric buttons.
Enter the same four-digit number as in step 1
to confirm.
to confirm.
NOTE
To view a locked channel, you must enter the PIN (See page
21 for locking channels). When you select a locked channel,
a PIN prompt message pops up. Press 6 to display the PIN
input window.
As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
21 for locking channels). When you select a locked channel,
a PIN prompt message pops up. Press 6 to display the PIN
input window.
As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
Cancel PIN
Allows you to reset your PIN.
Parental rating
This function allows DTV channels to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
prevents children from watching violent or sexual scenes
that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings
used exclusively in France.
Refer to page 32 for details about ratings.
used exclusively in France.
Refer to page 32 for details about ratings.
Language Settings
Setup
Language
You can select an OSD language from the “Setup”
menu. Select from among 23 languages. Refer to the
OSD language
menu. Select from among 23 languages. Refer to the
OSD language
column in the specification table for the
selectable languages (Page 29).
•
1
2
•
•
•
•
Digital Setup
Subtitle
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
subtitles for the hearing impaired) to display if subtitles
are available.
Selectable items
1st Language
2nd Language
For hearing impaired
2nd Language
For hearing impaired
E
E
E
E
E
Switching subtitle languages
Each time you press [ on the remote control unit, the
subtitle switches.
subtitle switches.
Off
1st Language
2nd Language
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over each
of the subtitle language settings (e.g., “1st Language”,
“2nd Language”, etc.).
of the subtitle language settings (e.g., “1st Language”,
“2nd Language”, etc.).
EXAMPLE
1st Language
(For hearing impaired)
1st Language
NOTE
Subtitles will not be displayed when the programme does not
contain subtitle information.
contain subtitle information.
Option
Digital Audio Language
Select the preferred language from “1st Digital Audio
Language” (“2nd Digital Audio Language”) to set up
the first (second) priority language for digital audio.
This setting is effective only when more than one audio
language is available.
Language” (“2nd Digital Audio Language”) to set up
the first (second) priority language for digital audio.
This setting is effective only when more than one audio
language is available.
Switching the multi audio languages
Each time you press 2 on the remote control unit, the
audio language switches.
audio language switches.
NOTE
You can set up to two preferred multi audio languages if the
audio languages are available.
audio languages are available.
E
E
•
E
•
Basic adjustment
LC-LE600E_GB.indd 22
LC-LE600E_GB.indd 22
2009/07/14 14:39:01
2009/07/14 14:39:01
Click on the first or last page to see other LC-40LE600E (serv.man13) service manuals if exist.