Sharp LC-40LE600E (serv.man13) User Manual / Operation Manual ▷ View online
15
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
Connecting an amplifier with digital
audio input
audio input
DIGITAL AUDIO IN
Optical audio cable
E
Connecting an amplifier with
analogue audio input
analogue audio input
AUX1 IN
L
R
AUX OUT
L
R
Audio cable
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio
output format compatible with the programme you are watching or the device connected.
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio
output format compatible with the programme you are watching or the device connected.
Go to “MENU” > “Option” > “Digital Audio Output” > select “PCM” or “Dolby Digital”.
NOTE
When set to “Dolby Digital”, Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When
set to “PCM”, PCM is output no matter what audio formats are received.
set to “PCM”, PCM is output no matter what audio formats are received.
E
•
Inserting the CA Card into the CI Module
Carefully insert the CI Module in
the CI slot with the contact side
forward.
The logo on the CI Module must
be facing outward from the rear
of the TV.
the CI slot with the contact side
forward.
The logo on the CI Module must
be facing outward from the rear
of the TV.
1
2
Checking CI Module information
Go to “MENU” > “Digital Setup” > “CI Menu”.
The content of this menu depends on the provider of the CI Module.
Module
General information on CI Module displays.
Menu
Adjustment parameters of each CA Card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
Make sure that the CI Module is properly inserted.
•
•
Connecting external devices
LC-LE600E_GB.indd 15
LC-LE600E_GB.indd 15
2009/07/14 14:38:55
2009/07/14 14:38:55
16
What is the MENU?
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.
The “MENU” enables various settings and adjustments.
The “MENU” enables various settings and adjustments.
Basic Operation
Display the MENU
Screen
Press @ and the “MENU” screen
displays.
displays.
Picture
OPC
[Off]
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
DYNAMIC
Exit the MENU screen
The operation will exit the “MENU”
screen if you press
screen if you press
> before it is
completed.
Select an item
Press
a/b/c/d to select/adjust
the desired menu, and adjust the item
to the desired level, and then press
;. Press 6 to return to the previous
“MENU” page.
to the desired level, and then press
;. Press 6 to return to the previous
“MENU” page.
Selecting in the MENU
Energy Save
ECO
No Signal Off
No Operation Off
[Off]
[Disable]
[Disable]
ECO picture control
[On]
Selecting options
On
NOTE
“MENU” options differ in the selected input modes, but the operating procedures are the same.
Items with 4 cannot be selected for various reasons.
The “MENU” screen will disappear if left unattended for several seconds.
Items with 4 cannot be selected for various reasons.
The “MENU” screen will disappear if left unattended for several seconds.
Operation without a remote control unit
This function is useful when there is no remote control unit within your reach.
Press @ and the “MENU” screen displays.
Press :r/s instead of
a/b or i+/- instead of c/d to select the item.
Press b to complete the setting.
1
2
3
2
3
About the Guide Display
The Guide Display at the bottom of the screen shows operations with the
OSD.
OSD.
The bar above is an operational guide for the remote control unit. The bar will
change in accordance with each menu setting screen.
change in accordance with each menu setting screen.
•
Select
Enter
Back
End
•
•
•
•
•
•
•
•
Menu operation
LC-LE600E_GB.indd 16
LC-LE600E_GB.indd 16
2009/07/14 14:38:55
2009/07/14 14:38:55
17
Picture Settings
Picture
OPC
[Off]
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
DYNAMIC
Picture
OPC
Automatically adjusts the brightness of the screen.
Item
On:Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
while adjusting the brightness of the
screen.
On
Automatically adjusts.
Off
The brightness is fixed at the value set
in “Backlight”.
in “Backlight”.
NOTE
When set to “On”, the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure no
object obstructs the OPC sensor, which could affect its ability
to sense surrounding light.
automatically adjusts the backlight brightness. Make sure no
object obstructs the OPC sensor, which could affect its ability
to sense surrounding light.
Picture
Picture adjustments
Adjusts the picture to your preference with the following
picture settings.
picture settings.
Adjustment items
Selectable
items
c (Cursor)
d (Cursor)
Backlight
The screen dims
The screen brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour
intensity
intensity
For more colour
intensity
intensity
Tint
Skin tones become
purplish
purplish
Skin tones become
greenish
greenish
Sharpness
For less sharpness
For more sharpness
•
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
optimising the picture quality.
Picture
Colour Temp.
High
[On]
[On]
[On]
[Middle]
Film Mode
Active Contrast
DNR
OPC Max.
OPC Min.
Active Contrast
DNR
OPC Max.
OPC Min.
DYNAMIC
Colour Temp.
Adjusts the colour temperature to give the best white
image.
image.
Item
High
White with bluish tone.
Mid-High
Intermediate tone between “High” and
“Middle”.
“Middle”.
Middle
Natural tone.
Mid-Low
Intermediate tone between “Middle”
and “Low”.
and “Low”.
Low
White with reddish tone.
Film Mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality.
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality.
Active Contrast
Automatically adjusts the contrast of an image according
to the scene.
to the scene.
DNR
“DNR” produces a clearer image (“Off”, “High”, “Middle”,
“Low”).
“Low”).
NOTE
This function may not be available depending on the input
signal type.
signal type.
•
Basic adjustment
LC-LE600E_GB.indd 17
LC-LE600E_GB.indd 17
2009/07/14 14:38:56
2009/07/14 14:38:56
18
Range of OPC
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
e 16 and a minimum of f 16.
NOTE
This function is available only when the “OPC” setting is set to
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than
the minimum setting.
The minimum setting cannot be set to a bigger number than
the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than
the minimum setting.
The minimum setting cannot be set to a bigger number than
the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
AV MODE
“AV MODE” gives you several viewing options to choose
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
Press
#.
Each time you press
#, the mode
changes.
You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing
“Audio” menu screen by pressing
#.
Item
STANDARD
For a highly defined image in a normally
bright room.
bright room.
MOVIE
For viewing a movie in a darkened room.
GAME
For playing of video games.
PC*
For PC.
USER
Allows you to customise settings as
desired. You can set the mode for each
input source.
desired. You can set the mode for each
input source.
DYNAMIC (Fixed)
For a clear-cut image emphasising
high contrast for sports viewing (The
“Picture” and “Audio” settings cannot
be adjusted).
high contrast for sports viewing (The
“Picture” and “Audio” settings cannot
be adjusted).
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
contrast for sports viewing.
NOTE
The item marked with * is available only when selecting “HDMI
1”, “HDMI 2”, “HDMI 3” or “EXT 4” from the “INPUT SOURCE”
menu.
1”, “HDMI 2”, “HDMI 3” or “EXT 4” from the “INPUT SOURCE”
menu.
•
•
•
•
•
1
2
2
•
•
Audio Settings
Audio
Treble
[Off]
[Normal]
Bass
Balance
Surround
Type
Audio Description
Reset
Balance
Surround
Type
Audio Description
Reset
DYNAMIC
L
R
Audio
Audio Adjustment
You can adjust the sound quality to your preference with
the following settings.
the following settings.
Selectable
items
c (Cursor)
d (Cursor)
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
the right speaker
Decrease audio from
the left speaker
the left speaker
Audio
Surround
This function allows you to enjoy realistic live sound.
Audio
Type
Item
Normal
Audio stream is output normally.
Audio Description
Selecting this item enables you to adjust
the settings for the visually impaired
(see below).
the settings for the visually impaired
(see below).
Hard of Hearing
Audio for the hearing impaired is output
on the TV speakers by default when the
programme contains audio information.
on the TV speakers by default when the
programme contains audio information.
Basic adjustment
LC-LE600E_GB.indd 18
LC-LE600E_GB.indd 18
2009/07/14 14:38:57
2009/07/14 14:38:57
Click on the first or last page to see other LC-40LE600E (serv.man13) service manuals if exist.