Sharp LC-39LE751EK (serv.man5) User Manual / Operation Manual ▷ View online
Quick guide
1
2
3
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
depending on your TV installation and connection.
Connect an antenna cable to
the antenna terminal (Page 8).
the antenna terminal (Page 8).
If necessary, insert a CA
card into the CI slot to watch
scrambled broadcasts
(Page 8.)
card into the CI slot to watch
scrambled broadcasts
(Page 8.)
Plug in the AC cord (Page 8).
Product shape varies in some countries.
Turn on the power using a on
the TV (Page 17).
the TV (Page 17).
Run the initial auto installation
(Page 9).
(Page 9).
Language, Energy
Efficiency, country, antenna
type settings, etc.
Efficiency, country, antenna
type settings, etc.
Go to Next.
Congratulations!
Now you can watch TV.
Now you can watch TV.
If necessary, adjust the
antenna to attain maximum
signal reception (Page 14).
antenna to attain maximum
signal reception (Page 14).
7
Preparation
Power on and
run the auto
installation
Watch TV
Connect
external devices
Connect external
devices such as a
DVD player/recorder
as instructed (Pages
41, 42 and 43).
devices such as a
DVD player/recorder
as instructed (Pages
41, 42 and 43).
Connect external
audio devices such as
speakers/amplifier as
instructed (Pages 41,
42 and 43).
audio devices such as
speakers/amplifier as
instructed (Pages 41,
42 and 43).
Start searching
channels
Quick guide
Before turning on the power
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV.
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV.
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Inserting the CA Card into the CI Module
1
With the side with the
gold coloured contact
chip facing the side of
the CI Module marked
with the provider’s
logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
gold coloured contact
chip facing the side of
the CI Module marked
with the provider’s
logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
2
Carefully insert the CI Module in the CI slot with
the contact side forward. The
logo on the CI Module must be
facing outward from the rear of
the TV. Do not use excessive
force. Make sure the module is
not bent in the process.
the contact side forward. The
logo on the CI Module must be
facing outward from the rear of
the TV. Do not use excessive
force. Make sure the module is
not bent in the process.
Checking CI Module information
1
Press MENU and the “MENU” screen is shown.
2
Press
c/d to select “Extras” menu.
3
Press
c/d to select “CA module”, and then
press OK.
• The content of this menu depends on the provider of
the CI Module.
●
●
Module
General information on CI Module displays.
●
●
Menu
Adjustment parameters of each CA Card displays.
●
●
Enquiry
You can input numerical values such as passwords here.
NOTE
The content of each screen depends on the provider of
the CI Module.
the CI Module.
Inserting a CA Card
NOTE
•
Make sure that the CI module is properly inserted.
•
This menu is only available for digital stations.
•
It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first
time. This process may fail when there is no antenna input or you have never run “Auto installation”.
time. This process may fail when there is no antenna input or you have never run “Auto installation”.
•
The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You
can only use the power button during upgrading.
can only use the power button during upgrading.
•
The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out.
•
If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the
screen prompts.
screen prompts.
AC cord
8
1
Carefully insert the CI
Module in the CI slot
with the contact side
forward.
Module in the CI slot
with the contact side
forward.
2
The logo on the CI
Module must be
facing outward from
the rear of the TV.
Module must be
facing outward from
the rear of the TV.
Place the TV close to the
AC outlet, and keep the
power plug within reach.
AC outlet, and keep the
power plug within reach.
Product shape varies
in some countries.
Standard
DIN45325 plug
(IEC 169-2) 75
DIN45325 plug
(IEC 169-2) 75
q
coaxial cable.
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
1 Press a on the TV.
• The initial auto installation wizard appears.
• The auto installation can also be called in the TV menu,
• The auto installation can also be called in the TV menu,
see Repeat initial installation on page 40.
• The routine of the first installation wizard depends on
the selected settings.
2 Setting the menu language.
Press
a/b/c/d
to select the desired language.
Proceed with
J
button.
3 Setting Energy Efficiency.
Decide how efficiently you want to operate your TV
set.
set.
•Home Mode:
The emphasis for home use is on low energy
consumption.
The emphasis for home use is on low energy
consumption.
•Shop Mode:
The picture settings are aligned to operate in the
presentation room. If the ambient brightness diminishes,
the energy consumption is not reduced.
The picture settings are aligned to operate in the
presentation room. If the ambient brightness diminishes,
the energy consumption is not reduced.
This setting can be changed later in the MENU
Extras
Extras
→Energy Efficiency.
Proceed with
J
button.
4 Selecting the TV location.
Press ▲/▼/◄/► to select your country or area.
• This setting screen only appears during the initial auto
installation.
Proceed with
J
button.
Quick guide
5 Select broadcast settings.
Press ▲/▼ to move between different tune type.
Press OK to select the desired antenna.
Press OK to select the desired antenna.
Cable analogue:
analogue broadcast via cable/
antenna.
DVB-T:
Digital broadcast.
DVB-C:
Cable digital broadcast.
DVB-S:
Satellite broadcast. (Only 752/754 series)
Proceed with
J
button.
6 Select subtitles and audio languages.
Press
a/b/c/d and OK
to select the desired
languages and alternative languages for subtitles
and audio for DVB programmes.
and audio for DVB programmes.
Proceed with
J
button.
•To set up audio commentary for the visually impaired, please
see Audio commentary on page 25.
If you have not selected DVB-T antenna in the antenna
selection, continue with Setting options for DVB-C
reception
selection, continue with Setting options for DVB-C
reception
on page 10.
7 Selecting tuner settings.
●
●
Scrambled stations
You can specify if coded stations are to be searched
for in the search/update.
Select yes to save all scrambled stations.
for in the search/update.
Select yes to save all scrambled stations.
•These stations can only be received in connection with a CI
module and the appropriate CA Card.
•If a CI module with a CA Card is already inserted for the station
search, all the stations which this module can descramble are
also saved when no is selected.
also saved when no is selected.
●
●
Search method
Select
Frequency search
if you want to run the
station search independently of the channel grid.
●
Accept logical channel number
In various countries, digital stations are transmitted
with a preset channel number per station, known as
"Logical Channel Numbers" (LCN).
If you select yes, these default channel numbers will
be used and the channels will be sorted as per LCN.
with a preset channel number per station, known as
"Logical Channel Numbers" (LCN).
If you select yes, these default channel numbers will
be used and the channels will be sorted as per LCN.
9
Confirm the following before turning
on the power
E Is the antenna cable connected?
E Is the AC cord plugged in?
Setting options for DVB-T reception
USB REC
NOTE
•
The value of Frequency and Network ID should
be set to the value specified by the cable provider.
be set to the value specified by the cable provider.
Press
J
to continue.
If you have not selected a DVB-S antenna in the
antenna selection, continue with Settings for all types
of reception
antenna selection, continue with Settings for all types
of reception
on page 13.
Select the satellite system.
Specify how you receive which satellite(s) (single
satellite or type of satellite system). Ask your dealer in
this regard.
The normal DVB-S settings are derived from the
selection of the location and do not need to be changed
in most cases.
satellite or type of satellite system). Ask your dealer in
this regard.
The normal DVB-S settings are derived from the
selection of the location and do not need to be changed
in most cases.
●
Single satellite
Reception of a single satellite via a connected LNC
(LNB). See page 11 for settings.
(LNB). See page 11 for settings.
●
2 satellites on 22kHz switchbox
Reception of two different satellites with two LNCs
(LNBs) which are connected to the TV set by a 22
kHz switchbox. See page 11 for settings.
(LNBs) which are connected to the TV set by a 22
kHz switchbox. See page 11 for settings.
●
2 satellites on Toneburst switch
Reception of two different satellites with two LNCs
(LNBs) which are connected to the TV set by a
toneburst switch. See page 11 for settings.
(LNBs) which are connected to the TV set by a
toneburst switch. See page 11 for settings.
●
Max. 4 satellites on DiSEqC multiswitch
The TV set controls a DiSEqC multiswitch to which
up to four LNCs (LNBs) for different satellites are
connected. See page 11 for settings.
up to four LNCs (LNBs) for different satellites are
connected. See page 11 for settings.
●
DiSEqC one cable communal system
Select setting if the TV set is connected to a DiSEqC
single cable system (according to EN50494). Several
satellite receivers can be connected to one satellite
cable. See page 12 for settings.
single cable system (according to EN50494). Several
satellite receivers can be connected to one satellite
cable. See page 12 for settings.
●
Other communal installation
Select this setting if the TV set is connected to a
single-cable system (without DiSEqC). Several
satellite receivers can be connected to one satellite
cable. As opposed to a DiSEqC one cable system
there are restrictions in the range of certain reception
frequencies in common single-cable community
systems. See page 13 for settings.
single-cable system (without DiSEqC). Several
satellite receivers can be connected to one satellite
cable. As opposed to a DiSEqC one cable system
there are restrictions in the range of certain reception
frequencies in common single-cable community
systems. See page 13 for settings.
Press
J
to continue
Quick guide
If you have not selected DVB-C antenna in the
antenna selection, continue with Setting options for
DVB-S reception
antenna selection, continue with Setting options for
DVB-S reception
below.
The normal DVB-C settings are derived from the
selection of the location and do not need to be changed.
selection of the location and do not need to be changed.
Press ▲/▼/◄/► to change each item to the appropriate
settings:
settings:
●
●
Network selection
If several networks are available via DVB-C, you
can decide which network you want to receive your
channels from.
can decide which network you want to receive your
channels from.
●
●
Scrambled stations
You can specify if coded stations are to be searched
for in the search/update.
Select yes to save all scrambled stations.
for in the search/update.
Select yes to save all scrambled stations.
•These stations can only be received in connection with a CI
module and the appropriate CA Card.
•If a CI module with a CA Card is already inserted for the station
search, all the stations which this module can descramble are
also saved when no is selected.
also saved when no is selected.
●
●
Search method
If you select Frequency Search, a search is
performed for all receivable stations. With Network
Search
performed for all receivable stations. With Network
Search
, only the stations which the networks
supply are searched, either for all receivable
networks or only for the particular network specified
under Network ID.
networks or only for the particular network specified
under Network ID.
●
●
Start
Frequency
The DVB stations are only searched for in the
frequency range above the start frequency.
frequency range above the start frequency.
●
●
Network ID
Change this setting to register only the specified
network ID.
network ID.
●
●
Accept logical channel number
In various countries, digital stations are transmitted
with a preset channel number per station, known as
"Logical Channel Numbers" (LCN).
If you select yes, these default channel numbers will
be used and the channels will be sorted as per LCN.
with a preset channel number per station, known as
"Logical Channel Numbers" (LCN).
If you select yes, these default channel numbers will
be used and the channels will be sorted as per LCN.
8 Supplying power to the antenna.
If you use a DVB-T antenna that requires a supply voltage
and which is not supplied via a power adapter, then select
yes (5V)
and which is not supplied via a power adapter, then select
yes (5V)
for the antenna's power supply.
Press
J
button.
How to align your DVB-T antenna is described on
page 14.
page 14.
9 Continue with Settings for all types of reception
(See page 13).
10
Setting options for DVB-C reception
Setting options for DVB-S reception
Click on the first or last page to see other LC-39LE751EK (serv.man5) service manuals if exist.