Sharp LC-37D65 Handy Guide ▷ View online
LED Flashing
Version 1.0
Issue 07/2010
21
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
LED flashing specification at the time of the error
Display method
Refer to Table 1.
Make the OPC LED flash using the [MENU] key on the remote control since the
display for service persons is identified by the number of flashings (once to 5 times).
Even if the [MENU] key is pressed again, it does not return to the display for
customers (only the power LED flashes).
display for service persons is identified by the number of flashings (once to 5 times).
Even if the [MENU] key is pressed again, it does not return to the display for
customers (only the power LED flashes).
After recovering from an error, if the same error cannot be generated again, refer to
MONITOR ERR CAUSE on the adjustment process screen.
MONITOR ERR CAUSE on the adjustment process screen.
LED flashing method
Synchronize the phases of the power LED and OPC LED.
If the LEDs have different number of flashings, adjust the flashing cycle to that where
the LED flashes more times
the LED flashes more times
LED Flashing
Version 1.0
Issue 07/2010
22
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
LED Flashing
Version 1.0
Issue 07/2010
23
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
LED Flashing
Version 1.0
Issue 07/2010
24
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Click on the first or last page to see other LC-37D65 service manuals if exist.