Sharp LC-32SD1E (serv.man13) User Manual / Operation Manual ▷ View online
31
Useful features (DTV)
Multi Audio
S.No
Language Code
1
Eng
2
Fre
3
Ger
4
Fin
MPEG2
MPEG2
MPEG2
1212
1213
1214
PID
1211
Audio Type
MPEG2
Stereo
Audio Mode
Select
OK
END
DTV MENU
2
Press a/b to select “Language”, c/d to select
the desired language available in the stream, and
then press b.
the desired language available in the stream, and
then press b.
3
Select “Subtitle”, press c/d to select “On” or “Off”.
• A confirmation message displays.
4
Press c/d to select “Yes”, and then press OK.
NOTE
• When “Subtitle” is set to “On”, the TV will automatically
start subtitle presentation if tuned to a programme
containing subtitle data.
containing subtitle data.
• This function deactivates each time you turn off the TV.
• When you press [ while watching DTV broadcasts, the
• When you press [ while watching DTV broadcasts, the
message “No subtitle” may appear instead of the Subtitle
OSD screen as mentioned. (This happens depending on
the type of programme and happens even when the TV is
actually receiving the subtitle data.)
In this case, press m first to activate the teletext mode,
then press [.
OSD screen as mentioned. (This happens depending on
the type of programme and happens even when the TV is
actually receiving the subtitle data.)
In this case, press m first to activate the teletext mode,
then press [.
NOTE
• When “Subtitle” is set to “On”, and the TV is tuned to a
service containing both MHEG5 and subtitle data, the
subtitle takes priority and subtitle presentation starts
automatically. In this case press m to start the MHEG5
presentation.
subtitle takes priority and subtitle presentation starts
automatically. In this case press m to start the MHEG5
presentation.
Subtitle
English
On
Language
Subtitle
Select
OK
END
DTV MENU
2
Press c/d to select the desired audio mode (Left,
Right, L+R, Stereo), and then press b to move
down.
Right, L+R, Stereo), and then press b to move
down.
3
Press a/b to select the desired language
available for the service, and then press OK.
available for the service, and then press OK.
NOTE
• Once you tune to another service or the power is turned
off, the setting returns to the parameter set in the Language
menu (page 23).
menu (page 23).
Using the MHEG5 application (UK only)
Some services bring you programmes with the MHEG
(Multimedia and Hypermedia Exper t Group)
application encoded, letting you experience DTV
interactively.
When provided, the MHEG5 application will start when
you press m.
(Multimedia and Hypermedia Exper t Group)
application encoded, letting you experience DTV
interactively.
When provided, the MHEG5 application will start when
you press m.
Sample MHEG5 screen
Using the multi audio function
Change the audio mode and language for the currently
viewed service.
viewed service.
1
Press 2 when no other menu screen is displayed.
Displaying subtitles
Set the desired language for the subtitle display and
enable/disable the subtitle display.
enable/disable the subtitle display.
1
Press [ when no other menu screen is displayed.
LC-32SD1E_GB_e
06.7.26, 10:28 AM
31
32
• Check if you pressed B on the remote control unit. (See page 8.)
If the indicator on the TV lights up red, press B.
• Is the AC cord disconnected? (See page 4.)
• Check if you pressed a on the TV. (See page 8.)
• Check if you pressed a on the TV. (See page 8.)
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Are batteries inserted with polarity (e, f) aligned? (See page 5.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Is the image position correct? (See page 18.)
• Are screen mode adjustments (4:3 Mode/WSS) such as picture size made
• Are screen mode adjustments (4:3 Mode/WSS) such as picture size made
correctly? (See pages 18 and 20.)
• Adjust the picture tone. (See pages 13 and 14.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 16 and 19.)
• Check the HDMI Setup setting. (See page 19.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 16 and 19.)
• Check the HDMI Setup setting. (See page 19.)
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
• Check the power control setting. (See page 15.)
• Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
• Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
• Is connection to other components correct? (See pages 9 and 10.)
• Is input signal type selected correctly after connection? (See page 19.)
• Is the correct input source selected? (See page 9.)
• Is non-compatible signal being input? (See page 33.)
• Is picture adjustment correct? (See pages 13 and 14.)
• Is the antenna connected properly? (See page 4.)
• Is “On” selected in “Audio Only”? (See page 18.)
• Is input signal type selected correctly after connection? (See page 19.)
• Is the correct input source selected? (See page 9.)
• Is non-compatible signal being input? (See page 33.)
• Is picture adjustment correct? (See pages 13 and 14.)
• Is the antenna connected properly? (See page 4.)
• Is “On” selected in “Audio Only”? (See page 18.)
• Is the volume too low? (See pages 6 and 7.)
• Make sure that headphones are not connected. (See page 7.)
• Check if you pressed e on the remote control unit. (See page 6.)
• Make sure that headphones are not connected. (See page 7.)
• Check if you pressed e on the remote control unit. (See page 6.)
• Check if “Monochrome” is set to “On”. If so, set it to “Off”. (See page 14.)
Troubleshooting
Appendix
IMPORTANT NOTE ON RESETTING THE PIN
We suggest that you remove the following instruction from the operation manual to prevent children from
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in
a safe space for future reference.
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in
a safe space for future reference.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to e60°C.
Storage temperature: –20°C to e60°C.
1
Repeat steps 1 to 3 in Changing the PIN. (See page 17.)
2
Enter “3001” to cancel out the current PIN.
• The PIN resets to the factory preset “1234”.
Problem
Possible Solution
• No power.
• Unit cannot be operated.
• Remote control unit does not
operate.
• Picture is cut off.
• Strange colour, light colour, or
dark, or colour misalignment.
• Power is suddenly turned off.
• No picture.
• No sound.
• The DTV menu screen is
displayed in monochrome and
hard to select the item.
hard to select the item.
LC-32SD1E_GB_f
06.7.26, 10:29 AM
32
33
Appendix
PC compatibility chart
Resolution
Horizontal
Frequency
Vertical
Frequency
VESA
Standard
640 g 480
VGA
31.5 kHz
60 Hz
✓
800 g 600
SVGA
37.9 kHz
60 Hz
✓
1024 g 768
XGA
48.4 kHz
60 Hz
✓
Communication procedure
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time. Wait
until the PC receives the OK response before sending
the next command.
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time. Wait
until the PC receives the OK response before sending
the next command.
Return code
Command 4-digits
Parameter 4-digits
Command format
Eight ASCII codes e CR
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: arameter 0 – 9, g, blank, ?
Parameter 4-digits: arameter 0 – 9, g, blank, ?
C1 C2 C3 C4 P1 P2 P3 P4
Parameter
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that four values are
input for the parameter.)
When the input parameter is not within an adjustable
range, “ERR” returns. (Refer to “Response code format”.)
blank(s) for the remainder. (Be sure that four values are
input for the parameter.)
When the input parameter is not within an adjustable
range, “ERR” returns. (Refer to “Response code format”.)
When “?” is input for some commands, the present setting
value responds.
value responds.
0
0
5
5
1
0
0
–
3
0
0
0
0
9
0
?
?
?
?
?
Return code (0DH)
Response code format
Normal response
Problem response (communication error or incorrect
command)
command)
Return code (0DH)
O
K
E
R
R
RS-232C port specifications
PC Control of the TV
• When a program is set, the TV can be controlled
from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the
volume can be adjusted and various other
adjustments and settings can be made, enabling
automatic programmed playing.
The input signal (PC/video) can be selected, the
volume can be adjusted and various other
adjustments and settings can be made, enabling
automatic programmed playing.
•
Attach an RS-232C cable cross-type (commercially
available) to a 9 pin D-sub/MINI-DIN (optional: AN-
A1RS) for the connections.
available) to a 9 pin D-sub/MINI-DIN (optional: AN-
A1RS) for the connections.
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC
to match the TV’s communications conditions. The TV’s
communications settings are as follows:
Set the RS-232C communications settings on the PC
to match the TV’s communications conditions. The TV’s
communications settings are as follows:
Baud rate:
Parity bit:
Data length:
Stop bit:
Flow control:
9,600 bps
8 bits
None
None
1 bit
None
RS-232C serial control cable
(cross type, commercially available)
(cross type, commercially available)
9 pin D-sub/MINI-DIN
conversion cable
(optional: AN-A1RS)
conversion cable
(optional: AN-A1RS)
VGA, SVGA and XGA are registered trademarks
of International Business Machines Co., Inc.
of International Business Machines Co., Inc.
NOTE
• This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly
to the VESA 60Hz standard. Any variations from this
standard will result in picture distortions.
to the VESA 60Hz standard. Any variations from this
standard will result in picture distortions.
LC-32SD1E_GB_f
06.7.26, 10:29 AM
33
34
Appendix
Commands
P
I
I
I
I
I
D
D
C
C
D
D
D
D
I
I
I
I
I
I
I
I
I
I
I
I
I
A
A
A
A
A
A
A
V
V
POWER OFF
INPUT SWITCHING (Toggle)
TV (CHANNEL FIXED)
DTV (CHANNEL FIXED)
EXT1 – 5 (1 – 5)
1 to 5, ERR (TV/DTV)
TV DIRECT CHANNEL (1 – 99)
1 to 99
CHANNEL UP
CHANNEL DOWN
DTV DIRECT CHANNEL (1 to 999)
1 to 999
DTV CHANNEL UP
DTV CHANNEL DOWN
EXT1 (Y/C)
EXT1 (CVBS)
EXT1 (RGB)
0 to 2
EXT2 (Y/C)
EXT2 (CVBS)
EXT2 (RGB)
0 to 2
EXT3
EXT4 (RGB)
EXT4 (COMPONENT)
0 to 1
EXT5 (HDMI)
AV MODE SELECTION (Toggle)
STANDARD
SOFT
ECO
USER
DYNAMIC
1 to 5
VOLUME (0 – 60)
0 to 60
POWER SETTING
INPUT SELECTION A
CHANNEL
INPUT SELECTION B
AV MODE
SELECTION
SELECTION
VOLUME
O
T
T
D
A
A
C
C
H
H
T
T
T
T
N
N
N
N
N
N
N
N
N
N
N
N
N
V
V
V
V
V
V
V
O
O
W
G
V
T
V
V
C
C
U
D
V
V
U
D
P
P
P
P
P
P
P
P
P
P
P
P
P
M
M
M
M
M
M
M
L
L
R
D
D
V
D
D
H
H
P
W
D
D
P
W
1
1
1
1
2
2
2
2
3
4
4
4
5
D
D
D
D
D
D
D
M
M
0
_
_
_
*
?
*
?
_
_
*
?
_
_
0
1
2
?
0
1
2
?
0
0
1
?
0
0
1
2
3
4
5
?
*
?
_
_
_
_
_
?
*
?
_
_
*
?
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
*
?
_
_
_
_
_
?
_
?
_
_
*
?
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
?
_
_
_
_
_
?
_
?
_
_
_
?
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
?
CONTROL ITEM
COMMAND
PARAMETER
CONTROL
CONTENTS
CONTROL ITEM
COMMAND
PARAMETER
CONTROL
CONTENTS
H
H
V
V
C
C
P
P
W
W
W
W
W
W
W
W
W
W
M
M
M
M
A
A
A
A
A
O
O
O
O
O
O
O
T
T
T
D
D
H-POSITION AV (
ⳮ10 – Ⳮ10)
AV (
ⳮ10 – Ⳮ10)
V-POSITION AV (
ⳮ20 – Ⳮ20)
AV (
ⳮ20 – Ⳮ20)
CLOCK (0 – 180)
0 to 180
PHASE (0 – 40)
0 to 40
WIDE MODE (Toggle)
NORMAL (AV)
ZOOM 14:9 (AV)
PANORAMA (AV)
FULL (AV)
CINEMA 16:9 (AV)
CINEMA 14:9 (AV)
NORMAL (PC)
FULL (PC)
1 to 10
MUTE (Toggle)
MUTE ON
MUTE OFF
1 to 2
SURROUND (Toggle)
SURROUND ON
SURROUND OFF
1 to 2
SOUND SELECT (ST/Bilingual/mono)
OFF
30 m
1 h 00 m
1 h 30 m
2 h 00 m
2 h 30 m
0 to 150
TEXT OFF
TEXT CHANGE (Toggle)
0 to 1
DIRECT PAGE JUMP (100 – 899)
100 to 899
P
P
P
P
L
L
H
H
I
I
I
I
I
I
I
I
I
I
U
U
U
U
C
C
C
C
C
F
F
F
F
F
F
F
E
E
E
C
C
O
O
O
O
C
C
S
S
D
D
D
D
D
D
D
D
D
D
T
T
T
T
D
D
D
D
H
T
T
T
T
T
T
T
X
X
X
P
P
S
S
S
S
K
K
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
V
V
V
V
A
M
M
M
M
M
M
M
T
T
T
G
G
*
?
*
?
*
?
*
?
0
1
2
3
4
5
6
9
1
?
0
1
2
?
0
1
2
?
_
0
1
2
3
4
5
?
0
1
?
*
?
*
?
*
?
*
?
*
?
_
_
_
_
_
_
_
_
0
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
_
?
*
?
*
?
*
?
*
?
_
?
_
_
_
_
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
_
?
*
?
_
?
_
?
_
?
_
?
_
_
_
_
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
_
?
_
?
WIDE MODE
POSITION
SURROUND
MUTE
AUDIO CHANGE
SLEEP TIMER
TEXT
NOTE
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
User-
adjusted rating
adjusted rating
Universal
Parental
X-rated
Universal
Parental
X-rated
—
✓
✓
—
✓
—
—
—
—
Rating table for Child Lock
Broadcasted
rating
User-
adjusted rating
adjusted rating
Broadcasted
rating
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
AGE
Universal
Parental
X-rated
✓
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
—
—
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
LC-32SD1E_GB_f
06.7.26, 10:29 AM
34
Click on the first or last page to see other LC-32SD1E (serv.man13) service manuals if exist.