DOWNLOAD Sharp LC-32SD1E (serv.man13) Service Manual ↓ Size: 1.89 MB | Pages: 40 in PDF or view online for FREE

MENU    

[Option ... Colour System]

Option

Audio Only

DNR

Input Select

Colour System

[Off]

[CVBS]

[AUTO]

Demo

1

Item displayed in yellow

• This indicates the item currently selected.

2

Item in brackets

• This indicates the current setting for the item.

3

Item displayed in white

• This indicates an item can be selected.

4

Item with 4 displayed in grey

• This indicates the item cannot be selected for various

reasons.

• Menu options differ in the selected input modes, but the

operating procedures are the same.

• The screens in the operation manual are for explanation

purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.

Use the following buttons on the remote control unit to
operate the menu.

Press to open or close the menu screen.

a/b/c/d:

Press to select a desired item on the screen
or adjust a selected item.

Press to go to the next step or complete the
setting.

Press to return to the previous step.

Press to open or close the DTV Menu screen.

Press to exit the menu item.

1

2
3

4

LC-32SD1E_GB_b

06.7.26, 10:26 AM

11

MENU    

[Picture]

Picture

Audio

Contrast

OPC

AV Mode

[STANDARD]

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+6]

–8

+8

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press  a/b to select the desired menu item
(Example: Backlight, Contrast, etc.).

4

Press  c/d to adjust the item to your desired
position.

• Select “Reset” to reset all adjustment items to the

factory preset values.

Off

On

On(Display)

MENU    

[Picture

 ... Backlight

]

Picture

Audio

Contrast

OPC

AV Mode

[STANDARD]

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+6]

–8

+8

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press a/b to select the desired menu item, and
then press OK (Example: AV Mode, OPC, etc.).

• Select “Reset” to reset all adjustment items to the

factory preset values.

4

Press a/b/c/d to select the desired item, and
then press OK.

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press a/b to select the desired menu item, and
then press OK (Example: Advanced, Demo, etc.).

4

Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Black,
etc.).

• Select “Reset” to reset all adjustment items to the

factory preset values.

Colour Temp.

Black

3D - Y/C

Monochrome

Film Mode

I/P Setting

High

Mid-High

Middle

Mid-Low

Low

5

Press a/b/c/d to select or adjust the desired
item, and then press OK.

LC-32SD1E_GB_b

06.7.26, 10:26 AM

12

MENU    

[Picture]

Picture

Audio

Contrast

OPC

AV Mode

[STANDARD]

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+6]

–8

+8

Off: The brightness is fixed at the value set in Backlight.
On: Automatically adjusts
On(Display): Displays the OPC effect on the screen while

adjusting the brightness of the screen.

Automatically adjust the brightness of the screen.

• You can also select OPC options by pressing OPC on the

remote control unit.

• When set to “On”, the TV senses the surrounding light

and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.

• You can also select AV Mode options by pressing AV

MODE on the remote control unit.

• You can adjust the factory preset parameters given in

“STANDARD”, “SOFT”, “ECO” and “DYNAMIC”. The
parameters chosen affect each of the input sources.

• The items marked with * are only available for TV/DTV/AV

input mode.

STANDARD: For a highly defined image in a normally

bright room

SOFT*: Creates a softer image.
ECO*: Reduces power consumption.
USER: Allows the user to customise settings as desired.

You can set the mode for each input source.

DYNAMIC*: For a clear-cut image emphasising high

contrast for sports viewing

AV Mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.

This TV provides various advanced functions for
optimising the picture quality.

Colour Temp.

Black

3D - Y/C

Monochrome

Film Mode

I/P Setting

High

Mid-High

Middle

Mid-Low

Low

Adjust the picture to your preference with the following
picture settings.

c button

d button

The screen dims

The screen
brightens

For less contrast

For more contrast

For less brightness

For more
brightness

For weaker red

For stronger red

For weaker green

For weaker blue

For stronger blue

For stronger
green

c button

d button

The screen dims

The screen
brightens

For less contrast

For more contrast

For less brightness

For more
brightness

For less colour
intensity

For more colour
intensity

Skin tones
become purplish

For less sharpness

For more
sharpness

Skin tones
become greenish

LC-32SD1E_GB_b

06.7.26, 10:26 AM

13

For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.

Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.

Off: No detecting
Standard: Normal adjustment
Fast: Set the optimum image quality for fast-moving

images.

Slow: Set the optimum image quality for slow-moving

images.

• 3D-Y/C may not operate depending on the input signal

type or noisy input signal.

• 3D-Y/C has even more effect on composite video signals

(CVBS).

For viewing a video in monochrome.

• When Monochrome is set to “On”, the DTV Menu screen

displays in monochrome.

Automatically detect a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.

Adjust the image and input signal can give you a more
beautiful picture.

Interlace: Display finely detailed images for TV or video,

etc.

Progressive: Display smooth images for still images or

graphics, etc.

Menu Operation: B (page 12)
You can adjust the sound quality to your preference
with the following settings.

MENU    

[Audio]

Audio

Power Control

Treble

Bass

Balance

Surround

Reset

[Off]

Auto Vol.

[Off]

Clear Voice

[Off]

[0]

[0]

–15

L

+15

[0]

–15

+15

R

AV Mode

[STANDARD]

Surround function allows you to enjoy realistic “live”
sound.

• You can also choose surround effects by pressing

SURROUND on the remote control unit.

Menu Operation: A (page 12)
This option links to AV Mode in the Picture menu. (See
page 13.)

Adjust the colour temperature to give the best white
image.

High: White with bluish tone
Mid-High: Intermediate tone between High and Middle
Middle: Natural tone
Mid-Low: Intermediate tone between Middle and Low
Low: White with reddish tone

Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. The Automatic Volume
Control (Auto Vol.) solves this problem and equalises
the volume levels.

Menu Operation: A (page 12)
This function emphasises speech voice against the
background noise for more intelligibility. It is not
recommended for music sources.

• The I/P Setting is set to “Progressive” when Film Mode is

“On”.

c button

d button

For weaker treble

For stronger treble

For weaker bass

For stronger bass

Decrease audio
from the right
speaker

Decrease audio
from the left
speaker

LC-32SD1E_GB_b

06.7.26, 10:26 AM

14