Sharp LC-32SB25EB (serv.man2) User Manual / Operation Manual ▷ View online
tV menu
installation update
installation update has similar function with
automatic installation� The difference is you could
update channel list without erasing the original
information�
automatic installation� The difference is you could
update channel list without erasing the original
information�
Press
1�
menu on the remote control and select
installation > Channel installation > installation
update.
update.
Press
2�
≥ to enter the
installation update menu.
Start now is highlighted.
Press
3�
oK.
Press the green button to start the update. This
4�
may take a few minutes.
When the update is complete, press the red
5�
button to return to the
Channel installation
menu.
Press
6�
menu to exit.
manually install channels
This section describes how to search and store
analogue TV channels manually� If you want to search
and store digital channel, please kindly refer to
analogue TV channels manually� If you want to search
and store digital channel, please kindly refer to
Section Test
digital reception
Step 1 Select your system
Step 1 Select your system
note
Skip to Step 2 Search and store new TV channels if your
•
system settings are correct�
Press
1�
menu on the remote control and select
installation > Channel installation > analogue:
manual installation.
manual installation.
Press
2�
≥ to enter the
System list.
Channel installation
Analog: Manual installation
Search
Fine tune
Store current channel
Store current channel
System
Installation update
Digital: Test reception
Analog: Manual installation
Rearrange
Clear program list
Clear program list
Automatic installation
TV Menu I Installation
Press
3�
< or > to select your country or region.
Press
4�
≤ to return to the
Channel installation
menu.
Step 2 Search and store new tV channels
Press
1�
menu on the remote control and select
installation > Channel installation > analogue:
manual installation > Search.
manual installation > Search.
Press
2�
≥ to enter the
Search menu.
Press the red button and the number buttons
3�
on the remote control to enter the three digit
frequency. Alternatively, press the green button
to automatically search for the next channel.
frequency. Alternatively, press the green button
to automatically search for the next channel.
Press
4�
≤ when the new channel is found.
Select
5�
Store as new channel, and press ≥ to
enter.
Press
6�
oK to save this channel.
The channel number will be shown on the screen.
7�
Press
8�
menu to exit.
23
tV menu
Fine tune analogue channels
You can manually fine tune analogue channels when
reception is poor�
reception is poor�
Press
1�
menu on the remote control and select
installation > Channel installation > analogue:
manual installation > Fine tune.
manual installation > Fine tune.
Press
2�
≥ to enter the
Fine tune menu.
Press
3�
< or > to adjust the frequency.
Press
4�
≤ when done.
Select
5�
Store current channel to store the fine
tuned channel under the current channel number.
Press
6�
≥ to enter.
Press
7�
oK. Done appears.
Press
8�
menu to exit.
rearrange channels
Press
1�
menu on the remote control and select
installation > Channel installation > rearrange.
Press
2�
≥ to enter the
rearrange list.
Press
3�
< or > in the
rearrange list to select the
channel you want to rearrange.
Press the yellow button to move the channel
4�
up the list, or press the blue button to move the
channel down the list.
channel down the list.
Press
5�
menu to exit.
rename channels
Press
1�
menu on the remote control and select
installation > Channel installation > rearrange.
Press
2�
≥ to enter the
rearrange list.
Press
3�
< or > in the
rearrange list to select the
channel you want to rename.
Press the red button. (
4�
rename)
Press
5�
≤ and ≥ to select characters or < and >
to change the characters. Space, numbers (0-9)
and other special characters are located between
z and a.
and other special characters are located between
z and a.
Press the green button or
6�
oK to finish.
note
Delete all characters by pressing the yellow button� Delete
•
only the highlighted character by pressing the blue button�
uninstall or reinstall channels
You can uninstall a stored channel or reinstall an
uninstalled channel�
uninstalled channel�
Press
1�
menu on the remote control and select
installation > Channel installation > rearrange.
Press
2�
≥ to enter the
rearrange list.
Press
3�
< or > to select the channel you want to
uninstall or reinstall.
Press the green button to uninstall or reinstall the
4�
channel.
Press
5�
menu to exit.
test digital reception
If using digital broadcasts, you can check the quality and
signal strength of digital channels� This allows you to
reposition and test your antenna or satellite dish�
signal strength of digital channels� This allows you to
reposition and test your antenna or satellite dish�
Press
1�
menu on the remote control and select
installation > Channel installation > Digital:
test reception.
test reception.
Press
2�
oK.
Press the green button to automatically start
3�
the test or manually enter the frequency of the
channel you want to test. If the signal quality
and strength is poor, reposition the antenna or
satellite dish and retest.
channel you want to test. If the signal quality
and strength is poor, reposition the antenna or
satellite dish and retest.
When complete, press the yellow button to store
4�
the frequency.
Press the red button to return to the
5�
Channel
installation menu.
Press
6�
menu to exit.
note
If you have further problems with the reception of your
•
digital broadcast, contact a specialised installer�
Clear program list
You can erase the program list�
Press
1�
menu on the remote control and select
installation > Channel installation > Clear
program list.
program list.
Press
2�
menu to exit.
24
tV menu
Source labels
You can assign a label to each input source as you
prefer in the label list�
prefer in the label list�
Go to
1�
installation > Source labels
Assign a input source and press > to select a
2�
label from label list.
Press
3�
b
on the remote control and check the
result.
assign a channel decoder (For atV)
Decoders that decode channels can be connected to
SCART� You have to assign the TV channel as a channel
to be decoded� Then assign the connection where the
decoder is connected�
SCART� You have to assign the TV channel as a channel
to be decoded� Then assign the connection where the
decoder is connected�
Press MENU on the remote control and select
1�
installation > Decoder.
Installation
Decoder
2 ...
3 ...
1 ...
Country
Channel installation
Source labels
Source labels
Decoder
Current software info
AV reset
Factory reset
AV reset
Factory reset
Language
TV Menu
Press
2�
≥ to enter the list.
Press
3�
< or > to select the channel to decode.
Press
4�
oK to select or unselect the channel.
Press
5�
≤ to return to the previous menu.
Press
6�
menu to exit.
Check your current software version
Press
menu on the remote control and select
installation > Current software info.
update software (digital broadcasts)
If using (DVB-T) digital broadcasts, your TV automatically
receives software updates� If you receive a message
on-screen prompting you to update your software:
receives software updates� If you receive a message
on-screen prompting you to update your software:
Select
•
accept (recommended) to update the
software immediately.
Select
•
reject to exit the update (not
recommended).
Select
•
remind me later to be reminded to update
the software later.
note
To scan all carriers for upgrade availability, perform the manual
•
upgrade�
The software upgrade may take about 30 minutes, but may
The software upgrade may take about 30 minutes, but may
•
take longer (up to 1 hour) depending on the signal status�
Caution
Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
aV reset
To reset the Audio and Video to default settings�
Press MENU on the remote control and select
1�
installation > aV reset
Press
2�
≥ to select “
Start now” and press oK.
Press
3�
menu to exit.
Factory reset
When you activate the
Factory reset , the TV needs to
be reset from First time installation�
Press MENU on the remote control and select
1�
installation > Factory reset
Press
2�
≥ to select “
Start now” and press oK.
Press
3�
menu to exit.
25
Connecting a pC
Connecting a pC
HDmi Connection
Y
L
R
L
R
Pb
P
SP
AU
COMPONENT
Y
L
R
Pb
P
SP
AU
COMPONENT
VGA
Y
L
R
L
R
Pb
COMPONE
VGA
Y
L
R
Pb
COMPONE
analogue Connection
VGA
AUDIO
PC IN
COMPONENT
PC IN
COMPONENT
VGA
AUDIO
PC IN
COMPONENT
PC IN
COMPONENT
Supported display resolutions
Computer formats (pC)
Resolution
Refresh rate
640 x 480
60Hz
800 x 600
56Hz
800 x 600
60Hz
1024 x 768
60Hz
1280 x 720
60Hz
1280 x 768
60Hz
1360 x 768
60Hz
1280 x 1024
60Hz (42” only)
1920 x 1080
60Hz (42” only)
Video formats
Resolution
Refresh rate
480i
60Hz
480p
60Hz
576i
50Hz
576p
50Hz
720p
50Hz, 60Hz
1080i
50Hz, 60Hz
1080p
(HDMI, Component only)
50Hz, 60Hz, 24Hz
26
PC
PC
HDMI cable
DVI/HDMI conversion cable
Ø 3�5 mm stereo mini jack cable
PC
PC
DVI/RGB conversion cable
RGB cable
Ø 3�5 mm stereo mini jack cable
Ø 3�5 mm stereo mini jack cable
Click on the first or last page to see other LC-32SB25EB (serv.man2) service manuals if exist.