DOWNLOAD Sharp LC-32P70E (serv.man39) Service Manual ↓ Size: 2.4 MB | Pages: 40 in PDF or view online for FREE

• Only if you use an

active terrestrial
antenna, select
“On (5V)” under
“Supply Voltage”.
(See page 18.)

AC INPUT terminal

OPC sensor

Remote control sensor

B (Standby/On) indicator

OPC indicator

a (Power button)

b (Input button)

i (l/k) (Volume buttons)

P (s/r)

(Programme [channel] buttons)

SLEEP indicator

EXT 2 (RGB) terminal

EXT 3 terminals

Headphone jack

EXT 1 (RGB) terminal

EXT 5 (HDMI/AUDIO)
terminals

Antenna input terminal
(DVB-T 5V=/80 mA)

OUTPUT (Audio) terminals

EXT 4 terminals

RS-232C terminal

COMMON INTERFACE slot

LC-26P70E_GB_a

06.5.2, 6:38 AM

7

Press a on the TV or B on the remote control unit.

• If you are not going to use this TV for a long period of

time, be sure to remove the AC cord from the power outlet.

• Weak electric power is still consumed even when a is

turned off.

• In DTV input mode, if the power is turned off immediately

after a setting change from the menu screen, the new
setting or channel information may not be memorised.

When the TV powers on for the first time after purchase,
the initial auto installation (Analogue) is invoked. You
can automatically set language, country and channels
in successive operations.

Setting the on-screen display language

1 Press a/b/c/d to select the desired language

listed on the screen.

2 Press OK to enter the setting.

Setting the country or area

1 Press  a/b/c/d to select your country or area

listed on the screen.

2 Press OK to enter the setting.
• The programme auto search starts at the same time.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 15.)

• The initial auto installation stops by pressing RETURN.

Press B on the remote control unit when the TV is
on.

• The TV enters standby mode and the image on the screen

disappears.

• The B indicator on the TV changes from green to red.
• To completely turn off the power to the TV, unplug the AC

cable from the AC outlet. However, do not unplug the AC
cable unless otherwise instructed.

Off

Red

Green

Power off

The TV is in standby mode.

The TV is on.

You can also select the desired channel from
programme list instead of using 0-9 numeric buttons
or P (r/s).

Press  OK when no other menu screen is
displayed.

Press a/b to select the desired channel to tune
in, and then press OK.

Press END to exit the Programme List.

Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.

To watch DTV broadcasts, follow the procedures below
to scan all available services in your area.

Press DTV or b to access the DTV mode.

Press DTV MENU and the DTV Menu screen displays.

Press c/d to select “Installation”.

Press a/b to select “Auto Installation”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.

• See page 17 for setting PIN.
• A confirmation message displays. Press c/d to

select “Yes”, and then press OK to start the search.

The TV starts scanning all available DTV and radio
services in your area.

• The language and country settings used in this operation

are the settings you have already set while executing the
Initial auto installation (Analogue). If you want to
reconfigure the country setting, for instance after moving
to another country, conduct “Auto Installation” from the
Analogue Menu again.

• The services are stored according to the channel number

information embedded in the stream (if available). If the
information is not available, the services are stored
according to the order in which they were received.
If you would like to sort the order, it is possible to arrange
it as explained in page 24.

• To cancel the scan in progress, press END.
• You cannot select any DTV-related menu items unless

“Auto Installation” has been completed.

After this setting, auto search starts with the following
order.

1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download

The setup menu disappears and you can watch the
programme on channel 1.

You do not need to do anything during the auto search.

LC-26P70E_GB_a

06.5.2, 6:38 AM

8

To view external source images, select the input source using b on the remote control unit or TV.

• The cables marked with * are commercially available items.

You can use the EXT 1 or 2 terminals when connecting
a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR to the EXT 2
terminal of the TV using the fully-wired SCART cable.

• TV-VCR advanced AV Link systems may not be compatible

with some external sources.

• TV-OUT from EXT 1 is not outputted when EXT 5 (HDMI)

or DTV is selected as the input.

SCART cable*

SCART cable*

VIDEO

S-VIDEO

L-AUDIO-R

AV OUTPUT

You can use the EXT 2, 3, 4 or 5 (HDMI) terminals
when connecting to a DVD player and other
audiovisual equipment.

A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 3 terminals.

• EXT 3: The S-VIDEO terminal has priority over the VIDEO

terminals.

S-video cable*

Composite
video cable*

AUDIO cable*

VIDEO

S-VIDEO

L-AUDIO-R

AV OUTPUT

AUDIO cable*

S-video cable*

Composite
video cable*

YP

B

(

C

B)

P

R

(

C

R)

COMPONENT

ø 3.5 mm stereo minijack cable*

Component
cable*

3 RCA to 15-pin
D-sub adapter
(Supplied)

HDMI cable*

When using an
HDMI-DVI
conversion adapter/
cable, input the
Audio signal here.

• When connecting an HDMI-DVI conversion adapter/cable

to the HDMI terminal, the image may not come in clearly.

• EXT 3: The S-VIDEO terminal has priority over the VIDEO

terminals.

LC-26P70E_GB_a

06.5.2, 6:38 AM

9

• The cables marked with * are commercially available

items.

• The PC input terminals are DDC1/2B-compatible.
• Refer to page 33 for a list of PC signals compatible with

the TV.

• Macintosh adaptor may be required for use for some

Macintosh computers.

• When connecting to a PC, the correct input signal type is

automatically detected.

This TV incorporates three typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.

While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).

When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.

Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.

• Refer to operation manuals of each external equipment

for the details.

• Only works when the audiovisual equipment is connected

to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.

• The use of the AV Link function is only possible if the TV-

set has enforced a complete auto-installation with the
connected audiovisual equipment (page 8, Initial auto
installation).
The availability of the AV Link function depends on the
audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.

Use the EXT 4 terminals to connect a PC.

ø 3.5 mm stereo minijack cable*

RGB cable*

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.

• In cases when the decoder needs to receive signal from

the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 16.)

• Do not connect the decoder to the EXT 2 terminal.

SCART cable*

LC-26P70E_GB_b

06.5.2, 6:39 AM

10