DOWNLOAD Sharp LC-32P70E (serv.man39) Service Manual ↓ Size: 2.4 MB | Pages: 40 in PDF or view online for FREE

In some cases you may be prompted to enter
characters. See below for details.

1

2

To add or overwrite with a space.

3

4

YELLOW (Select) button

Press to move between the input area and character
select area.

5

a/b/c/d button

Press to move the cursor.

6

OK button

While in the input area:
Confirms the new name.
Once  OK is pressed to confirm, a confirmation
message displays.
Press c/d to select “Yes”, and then press OK.
While in the character select area:
Confirms the input of a character.

Configure various settings for each service. Press the
preassigned 

 numeric buttons to access each

of the functions explained below.

Press  OK while the cursor is on “Programme
Setup”.

Basque
Catalan
Croatian
Czech
Danish
Dutch
English*
Finnish
French
Gaelic*
Gallegan
German

Greek
Italian
Norwegian
Polish
Portuguese
Russian
Serbian
Slovak
Spanish
Swedish
Turkish
Welsh*

* Languages available for MHEG5 service

Select language settings for audio (if a programme is
broadcast in more than one language) and MHEG5
service.

Press OK while the cursor is on “Language”.

Press a/b to select “1st Pref. Audio”, “2nd Pref.
Audio”, “3rd Pref. Audio” or “MHEG”.

Select a desired language for each item.

• See page 18 to change the language displayed on-screen.
• See page 31 to change the subtitle language.
• See page 31 for details on the MHEG5 service.

• The picture window shows a blank image if Radio services

are listed.

Call up the character set screen while in the
“Label” or “Carrier Setup” screen. (See pages 25
and 26.)

Press  YELLOW (Select) to move the cursor to
the character select area.

Press a/b/c/d to select the desired character,
and then press OK. Repeat until the new name is
fully entered.

• Use space to add a space or overwrite.

To register the new name, press YELLOW
(Select) to move the cursor back to the input area.

Press OK.

• A confirmation message displays.

Press c/d to select “Yes”, and then press OK.

1

3

5

6

4

2

LC-26P70E_GB_d

06.5.2, 6:41 AM

23

Assign services to 4 different favourite groups.

Press a/b to select the desired service.

Press 

 on the remote control. A selection box

displays.

Press a/b to register the selected service to any
of the 4 favourite groups (None, Fav 1 ... Fav 4)
and then press OK. An icon displays indicating
the favourite status.

• Do not press END to exit the screen here if you wish

to register the change.

Press OK.

Now you can easily select your favourite service
from the Programme List. (See page 30.)

• You cannot register the same service to two different

favourite groups.

Sort the order of the selected service by moving the
service position.

Press a/b to select the desired service.

Press 

 on the remote control. An icon displays

indicating the service to be moved.

• Pressing 

 will turn the move icon on and off.

Move the selected service to the desired position
using a/b, and then press OK.

• Do not press END to exit the screen here if you wish

to register the change.

Press OK to register the change.

When the service is locked, you must enter your PIN
whenever you tune to the service.

Press a/b to select the desired service.

Press 

 on the remote control.

If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
An icon displays indicating the service is locked.

• Pressing 

 will turn the lock icon on and off. (PIN

entry is required when lifting the lock icon.)

• Do not press END to exit the screen here if you wish

to register the change.

Press OK.

• See page 17 for setting the PIN.

Use this function to change the position of two selected
services.

Press a/b to select the desired service.

Press 

 on the remote control.

Enter the number you want to change to using

 numeric buttons, and then press OK. The

positions of the selected services are switched.

• Do not press END to exit the screen here if you wish

to register the change.

• You cannot enter a service number that is not listed.

Press  OK again, the message “Successfully
updated” displays. The change is now registered.

Services that are set to skip will not be picked up when
pressing P (s/r).

Press a/b to select the desired service.

Press 

 on the remote control. An icon displays

indicating the service to be skipped.

• Pressing 

 will turn the skip icon on and off.

• Do not press END to exit the screen here if you wish

to register the change.

Press OK.

• To view services that are set to be skipped, use 

numeric buttons or select from the Programme List.

Moving “002 ZDF” ahead of “001 ARD”.
Default order: Press a/b to select the desired service in
001rs002rs003rs004.
Sorted order: Press a/b to select the desired service in
002rs001rs003rs004.

s

s

s

s

s

s

s

s

s

s

LC-26P70E_GB_d

06.5.2, 6:41 AM

24

Change individual service names.

Press a/b to select the desired service.

Press 

 on the remote control. A character set

screen displays.

Enter new name for the service. See page 23 for
operations using the character set screen.

Erase the selected service(s) from the memory.

Press a/b to select the desired service.

Press 

 on the remote control. An icon displays

indicating the service to be erased.

• Pressing 

 will turn the erase icon on and off.

• Do not press END to exit the screen here if you wish

to register the change.

Press OK.

• A confirmation message displays.

Press c/d to select “Yes”, and then press OK.

Tune to the service shown in the picture window.

Press a/b to select the desired service.

Press 

 on the remote control.

• The image shown in the picture window changes.

Press END to exit the Programme Setup screen
to view the image in full screen.

This section describes how to reconfigure the DTV
settings after conducting Initial auto installation
(DTV) on page 8.

Manually add a new carrier by entering the desired
carrier number or frequency band.

Press c/d to select “Installation”.

Press  a/b  to select “Carrier Scan”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.

The TV automatically detects and stores all available
services in your area. See Initial auto installation
(DTV) on page 8 for details.

• If the TV detects a new carrier/service that has become

available after performing “Auto Installation”, the message
“Do you want to save?” displays.
Press c/d to select “Yes” or “No”, and then press OK.

Press a/b to select “Channel”, then c/d to enter
the carrier number, and then press OK.

• A confirmation message displays. Press c/d to

select “Yes”, and then press OK to start the search.

• The frequency of the selected carrier in the below

cell changes correspondingly.

After the scan is complete, the screen shows all
available services for the selected range.

A confirmation message displays. Press c/d to
select “Yes”, and then press OK to save the
change.

• You can directly enter the frequency instead of step 3. In

this case, select “Frequency (kHz)”, enter the number
using 

 numeric buttons, and then press OK. Use

c/d to move between the digits.

• After performing “Carrier Scan”, the order stored by using

the “Move” function will revert to the default order.

• See page 17 for setting the PIN.

Use this function to jump to the specific service in one
step. This is useful when there are many services
displayed on screen to scroll through.

Press 

  on the remote control. Now you can

change the service number on the left side of the
screen.

Enter the number using 

 numeric buttons,

and then press OK. The highlight moves to the
selected service.

LC-26P70E_GB_d

06.5.2, 6:41 AM

25

This is provided for you to rename (label), erase, or
re-scan carriers. “Carrier” in this context refers to a
service station that provides a set of individual
services.

Press c/d to select “Installation”.

Press a/b to select “Carrier Setup”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.

Configure On-Screen Display and Child Lock settings.

The On-Screen Display appearance and the position/
duration of the service banner information can be
customised.

Press c/d to select “System Setup”.

Press OK.

1 Sec/2 Secs/
... 7 Secs/None

Top/Bottom

None/10%/20%/
...50%

Banner
timeout

Banner
position

Transparency

Select how long the service
banner information
appears on screen.

Select whether the service
banner information
appears on top or bottom
of the screen.

Select the desired level of
On-Screen Display
transparency.

1 To rename the selected carrier:

Select the carrier, and then press RED (Label).
The character set screen displays.
Enter a new name for the carrier. See page 23 for
details on using the character set screen.

2 To erase the selected carrier:

Select the carrier, and then press GREEN (Erase).
An icon displays indicating the carrier to be erased.
Pressing GREEN will turn the erase icon on and off.
Press OK.
A confirmation message displays.
Press c/d to select “Yes”, and then press OK.

3 To re-scan the selected carrier:

Select the carrier, and then press BLUE (Rescan).
Re-scanning starts.
A confirmation message displays.
Press c/d to select “Yes”, and then press OK.

• After re-scanning the selected carrier, the order stored

by using the “Move” function will revert to the default order.

Press a/b to select the desired item.

Press c/d to select the desired parameter, and
then press OK.

A confirmation message displays. Press c/d to
select “Yes”, and then press OK to save the
change.

LC-26P70E_GB_d

06.5.2, 6:41 AM

26