DOWNLOAD Sharp LC-32LE210E Service Manual ↓ Size: 26.49 MB | Pages: 92 in PDF or view online for FREE

Page

Line

Sub

Page

Item

Description

Remarks (adjustment details, etc.)

01/17

[SHARP FACTORY MENU

ADC ADJUST (continued)

ADC ADJUST Submenu

Press “OK” to enter to ADC ADJUST Submenu

10

13/17

B-GAIN

80

Press “

Ż”  or  “Ź” for manual adjustment.

R-OFFSET

128

Press “

Ż”  or  “Ź” for manual adjustment.

G-OFFSET

128

Press “

Ż”  or  “Ź” for manual adjustment.

B-OFFSET

128

Press “

Ż”  or  “Ź” for manual adjustment.

AUTO ADC

“SUCCESS” or ”Fail will be displayed

Press “

Ż”  or  “Ź” for automatic adjustment in each mode.

11

GAMMA (1/3)

GAMMA Submenu

Press “OK” to enter to GAMMA Submenu

14/17

MGAMMA IN1

40

W/B adjustment, gradation 1 input setting.

MGAMMA IN2

80

W/B adjustment, gradation 2 input setting.

MGAMMA IN3

120

W/B adjustment, gradation 3 input setting.

MGAMMA IN4

160

W/B adjustment, gradation 4 input setting.

MGAMMA IN5

200

W/B adjustment, gradation 5 input setting.

MGAMMA IN6

240

W/B adjustment, gradation 6 input setting.

MGAMMA WRITE

“SUCCESS” will be displayed

Press “

Ż”  or  “Ź” for EEP writing of adjustment values.

MGAMMA RESET

“SUCCESS” will be displayed

Press “

Ż”  or  “Ź” for Initialization of adjustment values.

GAMMA (2/3)

GAMMA Submenu

15/17

MGAMMA R1

151

W/B adjustment, gradation 1R adjustment value.

MGAMMA G1

155

W/B adjustment, gradation 1G adjustment value.

MGAMMA B1

146

W/B adjustment, gradation 1B adjustment value.

MGAMMA R2

307

W/B adjustment, gradation 2R adjustment value.

MGAMMA G2

318

 W/B adjustment, gradation 2G adjustment value.

MGAMMA B2

308

W/B adjustment, gradation 2B adjustment value.

MGAMMA R3

458

W/B adjustment, gradation 3R adjustment value.

MGAMMA G3

480

W/B adjustment, gradation 3G adjustment value.

MGAMMA B3

471

W/B adjustment, gradation 3R adjustment value.

MGAMMA WRITE

“SUCCESS” will be displayed

Press “

Ż”  or  “Ź” for EEP writing of adjustment values.

GAMMA (3/3)

W/B ADJUST Submenu

16/17

MGAMMA R4

619

W/B adjustment, gradation 4R adjustment value.

MGAMMA G4

640

W/B adjustment, gradation 4G adjustment value.

MGAMMA B4

631

W/B adjustment, gradation 4B adjustment value.

MGAMMA R5

770

W/B adjustment, gradation 5R adjustment value.

MGAMMA G5

800

W/B adjustment, gradation 5G adjustment value.

MGAMMA B5

789

W/B adjustment, gradation 5B adjustment value.

MGAMMA R6

918

W/B adjustment, gradation 6R adjustment value.

MGAMMA G6

961

W/B adjustment, gradation 6G adjustment value.

MGAMMA B6

946

W/B adjustment, gradation 6R adjustment value.

MGAMMA WRITE

“SUCCESS” will be displayed

 Press “

Ż”  or  “Ź” for EEP writing of adjustment values.

12

SYSTEM INFORMATION

SYSTEM INFORMATION 

Submenu

Press “OK” to enter to SYSTEM INFORMATION Sub-
menu (Only for Engineering purpose, don’t use)

17/17

NOISE LEVEL

8

Informative (changing).

GLOBAL MOTION

127

Informative (changing).

BIT RATE

0

 Informative.

Scan name search

2

Changeable between 0 and 255.

VPS code

FFFF

 Informative.

830/1 code

FFFF

 Informative.

830/2 code

FFFF

 Informative.

Top TXT enabled

1

 Press “

Ż”  or “Ź” to change 0/1.

CEC

off

 Press “

Ż”  or “Ź” to change off/on.

1. Enter in Service mode.

2. Press “

ź” until selecting “ADC ADJUST” option.

3. Press “OK”.

4. “ADC ADJUST” menu appears. 

5. Press “

ź” until selecting “ADJUST” option.

6. Press “

Ź”until selecting “Internal Signal”.

7. Press “

Ÿ”until selecting “MODE” option.

8. Press “

Ź”until selecting “RGB”.

9. Press “

ź” until selecting “AUTO ADC” option.

10. Press “

Ź”, the adjustment starts.

11. “SUCCESS” appears when the adjustments  nish.

12. Exit of Service mode.

1. Enter in Service mode.

2. Press “

ź” until selecting “ADC ADJUST” option.

3. Press “OK”.

4. “ADC ADJUST” menu appears.

5. Press “

ź” until selecting “ADJUST” option.

6. Press “

Ź”until selecting “Internal Signal”.

7. Press “

Ÿ”until selecting “MODE” option.

8. Press “

Ź”until selecting “YPbPr(SD)” or “YPbPr(HD)”

9. Press “

ź” until selecting “AUTO ADC” option.

10. Press “

Ź”, the adjustment starts.

11. “SUCCESS” appears when the adjustments  nish.

Note: both SD and HD are adjusted.

12. Exit of Service mode.

1. Enter in Service mode.

2. Press “

ź” until selecting “ADC ADJUST” option.

3. Press “OK”.

4. “ADC ADJUST” menu appears. 

5. Press “

ź” until selecting “ADJUST” option.

6. Press “

Ź”until selecting “Internal Signal”.

7. Press “

Ÿ”until selecting “MODE” option.

8. Press “

Ź”until selecting “PC-RGB”.

9. Press “

ź” until selecting “AUTO ADC” option.

10. Press “

Ź”, the adjustment starts.

11. “SUCCESS” appears when the adjustments  nish.

12. Exit of Service mode.

Condition: AV MODE= Dynamic (backlight at max.).

•  Adjustments reference device: Minolta CA-210

•  Adjustments target: x=0.272, y=0.277

  High: adjustments spec ±0.001, inspection spec: ±0.002

  Low:  adjustments spec ±0.002, inspection spec: ±0.004

1. Press “

ź” until selecting “GAMMA” option.

2. Press “OK”.

3.  “GAMMA” menu appears.

4. Press “

ź” until selecting “MGAMMA RESET”.

5. Press “

Ź”, to restore default values.

6.  “MGAMMA RESET SUCCESS” appears.

7.  Press “P+” to increase one page.

8.  Press “1”, appears “Internal Adjustments Pattern 1”.

9.  Hold the default value for “MGAMMA G1”.

(Note: next, try to get the (x, y) adjustments target,

 changing “MGAMMA R1” and “MGAMMA B1” as follow).

10. Press “

ź” until selecting “MGAMMA R1”.

11.  Press “

Ż Ź” until you obtain the desired value.

12. Press “MENU” to return to previous menu.

13. Press “

ź” until selecting “MGAMMA B1”.

14. Press “

Ż Ź” until you obtain the desired value.

15. Press “MENU” to return to previous menu.

(Note: In case of not being possible to achieve the desired 

(x, y) target, try to get it by changing also the “MGAMMA G1”)

16. Press “2”, appears “Internal Adjustments Pattern 2”.

17. Repeat from step 9 to 15 for the “MGAMMA R2” and “MGAMMA B2”.

18. Press “3”, appears “Internal Adjustments Pattern 3”.

19. Repeat from step 9 to 15 for the “MGAMMA R3” and “MGAMMA B3”.

20. Press “4”, appears “Internal Adjustments Pattern 4”.

21. Repeat from step 9 to 15 for the “MGAMMA R4” and “MGAMMA B4”.

22. Press “5”, appears “Internal Adjustments Pattern 5”.

23. Repeat from step 9 to 15 for the “MGAMMA R5” and “MGAMMA B5”.

24. Press “6”, appears “Internal Adjustments Pattern 6”.

25. Repeat from step 9 to 15 for the “MGAMMA R6” and “MGAMMA B6”.

26. Press “

ź” until selecting “MGAMMA WRITE”.

27. Press “

Ź”, to save the new values.

28. “MGAMMA WRITE SUCCESS” appears.

NOTE:

For activating the W/B  ag, only is necessary to send the order MGAMMA WRITE. After this action, the “W” W/B 
 ag will change to “1”. 

Caution: When the factory settings have been made, all user setting data, including the channel settings, are initialized.
(The adjustments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings.

1. Enter in Service mode.
2. Press “

ź” or “Ÿ” key until selecting INIT.

3. Press OK key.
4. INIT menu appears and “Factory init” option is selected.
5. Press  “

Ż” or “Ź” until selecting the option desired (EURO/RUSSIA/SWEDEN/UK/EAST EUROPE).

6. Press OK key and initialization starts.
7. OK, EURO message appears for EURO option when the setting is complete.

OK, RUSSIA message appears for RUSSIA option when the setting is complete.
OK, SWEDEN message appears for SWEDEN option when the setting is complete.
OK, UK message appears for UK option when the setting is complete.
OK, EAST EUROPE message appears for EAST EUROPE option when the setting is complete.

Note: Never turn the power off during initialization.

To exit the adjustment process mode, unplug the AC power cord from the outlet to forcibly turn off the power.

The following settings will be back to their factory ones.

•  User settings
•  Channel data (e.g. broadcast frequencies)
•  Maker option setting
•  Password data