Sharp LC-32LE210E Service Manual ▷ View online
13
LC-32LE210
LC-32LE220
LC-32LE220
5. Remove the speaker (R)
, (L)
.
6. Remove the 5 lock screws , 1 lock screw and detach the POWER Unit
.
7. Remove the 4 lock screws , and detach the MAIN Unit.
8. Remove the LED PWB .
8
9
10
11
12
13
Removing of major parts (Continued)
MAIN Unit
12
9
Speaker (L)
8
Speaker (R)
10
LED PWB
POWER Unit
13
11
MAIN Unit
12
9
Speaker (L)
8
Speaker (R)
10
LED PWB
POWER Unit
13
11
LC32LE210E & LC32Lx220E models:
LC32LE210EB & LC32Lx220EB models:
14
LC-32LE210
LC-32LE220
LC-32LE220
Removing of major parts (Continued)
Panel Brackets TOP
Panel Bracket
CENTER
CENTER
Panel Bracket
CENTER
Panel
Brackets
CENTER
Brackets
CENTER
Panel
Bracket
BOTTOM
Bracket
BOTTOM
Panel
Bracket
BOTTOM
Bracket
BOTTOM
15
15
15
15
15
15
15
15
14
14
Stand angle
14
14
Panel Bracket
TOP RIGHT
TOP RIGHT
15
15
Panel Bracket
TOP LEFT
TOP LEFT
Panel Bracket
CENTER
CENTER
15
Panel Bracket
CENTER
15
Panel Bracket
BOTTOM
BOTTOM
15
Panel
Brackets
CENTER
Brackets
CENTER
Panel
Bracket
BOTTOM
Bracket
BOTTOM
15
15
15
LC32LE210E & LC32Lx220E models:
LC32LE210EB & LC32Lx220EB models:
9. Remove the 6 lock screws and detach the stand angle.
10. Remove the 8 lock screws and detach the panel brackets.
14
15
15
LC-32LE210
LC-32LE220
LC-32LE220
Removing of major parts (Continued)
17
16
17
16
LC32LE210E & LC32Lx220E models:
LC32LE210EB & LC32Lx220EB models:
11. Remove the 4 lock screws and detach the angles.
12. Remove the insulation sheet .
16
17
16
LC-32LE210
LC-32LE220
LC-32LE220
SERVICE ADJUSTMENTS
1. Adjustment method after PWB and/or IC replacement due to repair
The unit is set to the optimum performance at the time of shipment from the factory.
If any value should become improper or any adjustment is necessary due to the part replacement, make an adjust-
ment
according
to
the
following
procedure.
1.1. Procure the following units in order to replace the main unit:
MAIN
UNIT
DUNTKF639FMxx
NOTE: [Caution when replacing ICs in the main unit (IC1901, IC1902, IC1902, IC1501, IC1006 and IC1007)]
Before replacing the relevant part, procure the following parts in which the data have been rewritten.
Ref.
Description
Parts code IC + data
Description new IC code for service
IC1901
HDMI EDID 1
RH-IXD236WJZZY
RH-IXD080WJZZY AND DATA LC32LE2x0E_HDMI_1_EDID
IC1902
HDMI EDID 2
RH-IXD237WJZZY
RH-IXD080WJZZY AND DATA LC32LE2x0E_HDMI_2_EDID
IC1903
HDMI EDID 3
RH-IXD238WJZZY
RH-IXD080WJZZY AND DATA LC32LE2x0E_HDMI_3_EDID
IC1501
PC EDID
RH-IXD239WJZZY
RH-IXD080WJZZY AND DATA LC32LE2x0E_PC_EDID
IC1006
HDCP USER SETTINGS
RH-IXD261WJZZY
RH-IXC986WJZZY AND DATA LC32LE2x0E_HDCP_KEY
IC1007
*
FLASH
MEMORY
MEMORY
RH-IXD262WJZZY
RH-IXD012WJZZY and LE210_v1.25_PANEL_AUO_BOARD_N1
RH-IXD263WJZZY
RH-IXD012WJZZY and LE210B_v1.25_PANEL_CMI_BOARD_N1
2. Entering and exiting the adjustment process mode. Standard method.
1. By key-unit.
1. Unplug the AC power cord.
2. Press and hold “V-” and “
b” keys, simultaneously, and then plug the AC power cord.
3. “K” appears on the screen.
4. Press and hold “V-” and “P-” keys, simultaneously.
5. “SHARP FACTORY MENU” appears (see Figure 1).
6. Unplug the AC power cord to exit of adjustments process.
2. By own R/C
1. Turn on the TV set.
2. Press “
b”,”2”,”5”, “8”, “0” (the time is limited to 5 sec. approx., for enter this code).
3. “SHARP FACTORY MENU” appears (see Figure 1).
4. Press “OK” on lines 5 ~ 12 to go to submenu.
5. Press “MENU” to return to main menu.
6. Press “END” to exit of adjustments mode.
* For Lx220 models it is not possible replace IC1007. Replace the full Main Unit.
Click on the first or last page to see other LC-32LE210E service manuals if exist.