DOWNLOAD Sharp LC-32LE144E (serv.man3) Service Manual ↓ Size: 5.29 MB | Pages: 33 in PDF or view online for FREE

ENGLISH

Some digital broadcasters rate their programmes 
according to age.
You can set TV to display only programmes with age 
ratings higher than your child’s.
This function requires a password.

Enter your password to access the Parental 
menu.

Press     to set the age rating from age 4~18 or 
select None to turn this function off or Block All.

NOTE
•  This function is available for programmes with Age 

Rating information.

Set the current time.

This function will show your favorite programs on the 
channel list.

Set your favorite program shown on the channel list.

When watching the digital TV, select your favourite 
network in order to allocate channels of your favourite 
network on the top of channel list. 
Select your favourite network and press OK.

NOTE
•  This menu is available only when 1) “Norway” is 

selected on country setting and 2) more than two 
networks are found after automatic channel scan.

The channel group setting is to group the service type 
(Video or Audio services) while changing channel by 
P+/P− buttons.

It is required for Riks TV certification for Norway.

When Channel Grouping is set to On, the P+/P− will 
change the services in a group, for example we have 
the services in channel list like below

V1 (video service)

V2

V3

V4

V5

A1 (audio service)

A2

A3

If channel is set to On, the P+/P− will change service 
among V1 to V5 when DTV video is currently selected, 
the way to change service type to audio is to push 
DTV/ATV button, DTV/ATV button will be changing 
source among ATV, DTV video and DTV audio. The 
channel grouping will be changed to On automatically 
while country is set to Norway.

Checking the CA module information.

NOTE
•  This menu is only available for digital stations.

•  The content of this menu depends on the provider of the 

CA module.

General information on CA module displays.

Adjustment parameters of each Smartcard

displays.

You can input numerical values such as

passwords here.

SHARP_LE144E_Rev1_GB_English.indd   15

SHARP_LE144E_Rev1_GB_English.indd   15

2012/09/13   17:44:06

2012/09/13   17:44:06

Press MENU.
Press     to select Picture, and press OK.

 

Picture Settings

C.M.S. Adjustment

OK

C.M.S. Control

DNR

MPEG NR

Off

Low

Low

You can customise current picture mode settings while 
selecting “User” in the Picture Settings menu.

Smart picture to set your TV to a 
predefined picture setting.
(Dynamic/ Standard/ Soft/ Movie/ 
User)

Automatically adjust the contrast of an 
image according to the scene.
(Off/Low/High)

Adjust the background brighter or 
darker.

Change the level of bright parts in 
the picture keeping the dark parts 
unchanged.

Change the level of light in the picture.

Change the level of saturation.

Change the colours to reddish or 
bluish.

Change the level of sharpness of fine 
details.

Automatically detects a film-based 
source, analyses it and then recreates 
each still film frame for high-definition 
picture quality. (On, Off)

Set the colour temperature to Cool 
(bluer), Medium (balanced), Warm 
(redder).

Selects the tone difference of the 
brightness and darkness of the image  
according to the type of programme 
watched.

Reset all adjustment item to factory 
preset values.

Select On to set the C.M.S. Adjustment to be more 
natural.

Adjust the brightness of a selected colour using a six-
colour adjustment system (only if the C.M.S. Control 
is On).

Filter and reduce the noise in the picture. (Off/Low/
Middle/High)

When watching a DVD, the compression may cause 
some words or picture elements to become distorted 
or pixelated. Using the MPEG NR feature reduces this 
effect by smoothing out the edges. (Off/Low/Middle/
High) 

Press MENU.
Press     to select Sound, and press OK.

Dual

Treble

Dual 1

Bass

Balance
Bass Enchancer

0

0

0

Surround Sound

Off

Off

AVL

Off

Dynamic Range Control

On

Digital Audio Output
Audio Description

OK

OK

If a programme or film is being 
broadcast with a soundtrack in more 
than one language, the DUAL feature 
allows selection between Dual1 or 
Dual2.

Adjust the Bass sound.

Adjust the Treble sound.

Set the balance of the left and right 
speakers to best fit your listening 
position.

SHARP_LE144E_Rev1_GB_English.indd   16

SHARP_LE144E_Rev1_GB_English.indd   16

2012/09/13   17:44:06

2012/09/13   17:44:06

ENGLISH

This function allows you to enjoy 
bass-enhanced sound.

Automatically switch the TV to the 
best surround sound mode available 
from a broadcast. (On, Off)

Reduce sudden volume changes, 
for example, during commercials or 
when switching from one channel to 
another. (On, Off)

Set the control of audio compression 
for some digital TV programmes. 
(On, Off) 
•  MPEG-1 and MPEG-2 audio 

programmes are not supported.

Select the type of digital audio out.
(PCM, Auto)

The audio delay timing to set Auto or 
Manual for audio/video display timing 
adjustment. 

When Audio Delay set to Manual, 
audio delay time to adjust (only if the 
Audio Delay is Manual).

Set the mix of visually impaired audio 
with regular audio. (On, Off)

Adjust the volume of visually impaired 
audio.

Press MENU.
Press     to select Setup, and press OK.

Select the menu display language.

Select the country where you are located. 
The TV installs and arranges channels according to 
your country.

 

Select the tuner mode. (Antenna, Cable)

See page Channel Setting.

See page Channel Setting.

See page Channel Setting.

See page DTV Settings.

E Lip Sync

This option activates an auto audio/video display timing 
adjustment function that allows HDMI source devices 
to accurately perform synchronization automatically. 
All of the above HDMI settings require a proper HDMI 
source device. If HDMI source products do not support 
these functions, the TV may not work properly when 
activating these functions.

NOTE
•  In a non-HDMI signal mode, this function is not available.

SHARP_LE144E_Rev1_GB_English.indd   17

SHARP_LE144E_Rev1_GB_English.indd   17

2012/09/13   17:44:07

2012/09/13   17:44:07

E EXT1 Input

You can set the specifi c type of signal going into 
SCART terminal. (S-VIDEO, AV)
Check the signal output type of the DVD or other 
equipment connected to the SCART teminal of the TV, 
referring to manufacturer’s instruction of those devices. 
Select the correct input signal setting for SCART.

NOTE
•  This option is available only when the input source is 

SCART.

For adjusting a picture’s horizontal and vertical position.

Centres the image by moving it to 
the left or right.

Centres the image by moving it up 
or down.

Reset all adjustment item to factory 
preset values.

NOTE
•  Adjustments are stored separately for each input source.

•  Depending on the input signal type, “Wide Mode” 

setting or “Movie” for the USB mode, a position setting 
may not be available.

•  This function is not available for digitally sourced 

content.

See page Initial Installation Overview.

When set to “4h,6h,8h”, the TV will automatically enter 
standby mode if no operations are performed in 4/6/8 
hours.
This power saving feature can be cancelled by 
selecting “Off”.

Select the location. (Home, Store)

E Auto Upgrade

The TV automatically determines whether a new 
software Searching for updates version is available 
when the TV is in standby mode.

NOTE
•  All countries except UK, Sweden and Italy are set to 

“Off” for this function. 

E Auto Install

Now checks if there is new software immediately.

E Manual OAD

When you get the software updating news from the 
retailer or internet, you can update the operation 
software using the OAD (Over Air Download) Download. 
The updated software data will be transferred through 
the TV signal.

NOTE
•  Please do not switch off the TV during the downloading 

process.

E USB Upgrade

This function allows you to update to the latest 
software using a USB device. You must update the 
software through the USB terminal.

Display the Software version.

If complex adjustments are made and the settings 
cannot be restored to normal, you can reset the 
settings to the factory preset values.

SHARP_LE144E_Rev1_GB_English.indd   18

SHARP_LE144E_Rev1_GB_English.indd   18

2012/09/13   17:44:07

2012/09/13   17:44:07