DOWNLOAD Sharp LC-32LE144E (serv.man3) Service Manual ↓ Size: 5.29 MB | Pages: 33 in PDF or view online for FREE

ENGLISH

Teletext broadcasts pages of information and 
entertainment to specially equipped television sets. 
Your TV receives Teletext signals broadcast by a TV 
network, and decodes them into graphical format for 
viewing. News, weather and sports information, stock 
exchange prices and programme previews are among 
the many services available.

Select a TV channel or external source providing 
a Teletext programme.

Press m to display Teletext.

• 

Many stations use the TOP operating system, 
while some use FLOF (e.g. CNN). Your TV 
supports both these systems. The pages are 
divided into topic groups and topics.

• 

If you select a programme with no Teletext signal, 
Teletext will not be displayed.

• 

The same message displays during other modes 
if no Teletext signal is available.

Press m again to display Teletext with TV 
picture.

Press m again to deactivate Teletext.

NOTE
•  Teletext will not work if the selected signal type is RGB.

Increase or decrease the page number.

Select a group or block of pages 
displayed in the coloured brackets at 
the bottom of the screen by pressing 
the corresponding Colour (R/G/Y/B) 
on the remote control unit.

Directly select any page from 100 to 
899 by using 0 - 9.

v 

Switch the Teletext image to Top, 
Bottom or Full.

l 

Press this button to return to page 100 
or index page.

3 

Stop updating Teletext pages 
automatically or release the hold mode.

k 

Reveal or hide hidden information such 
as an answer to a quiz.

[ 

Display the subtitle or exit the subtitle 
screen.
•  Subtitles will not be displayed when 

the service does not contain subtitle 
information.

Cancel the Teletext display.

Display or exit the time screen.

Some services bring you programmes with the MHEG 
(Multimedia and Hypermedia Expert Group) application 
encoded, letting you experience DTV interactively.

When provided, the MHEG5 application will start when 
you press the m button.

SHARP_LE144E_Rev1_GB_English.indd   11

SHARP_LE144E_Rev1_GB_English.indd   11

2012/09/13   17:43:59

2012/09/13   17:43:59

NOTE
•  You may be prompted to select your local cable 

operator before running the cable scan mode.

Press     to select Scan type, and press 

   to select Quick Scan or Full Scan.

Press     to select Start Frequency, End 
Frequency, Modulation, Symbol Rate or Network 
ID, and use digit buttons on the remote control to 
define the information or select Auto for tuning.

When country was selected “Others” and ATV 
system was selected, press     to select 
System, and press     to select System.

Press     to select Start Scan, and press OK to 
start auto tuning.

NOTE
•  The information should be given by your cable provider.
•  Network ID is only available for Quick Scan.

There are two TV modes: ATV and DTV that can be 
tuned-in manually using Manual Tuning.

Press MENU.
Press     to select Setup, and press OK.
Press     to select ATV Manual Tuning, and press 
OK

.

E Channel Sort

Channel Sort allows you to reorder the channels.

Press     to select desired channel and press  .

Position

1
2
3
4
5
6

Channel

C1
C2
C3
C4
C5
C6

Station

ííííí
ííííí
ííííí
ííííí
ííííí
ííííí

Back

RETURN

Sort

Enter

OK

Press     to select the channel you wish to 
swap and press  .
The positions of the two channels are swapped.

The TV automatically detects and stores all available 
services in your area. This function also allows you to 
perform the channel setting for digital and analogue 
individually and reconfigure the settings after the initial 
auto installation has been completed.

Press MENU.
Press     to select Setup, and press OK.
Press     to select Auto Tuning, and press OK.

E Tuner Mode - Antenna

Press     to select ATV and DTV, DTV or ATV, 
and press OK.

Tuning Mode

Start Scan

ATV and DTV

OK

Back

RETURN

Previous settings will be lost !
Press EXIT for no change.

Enter

OK

When country was selected “Others” and ATV 
system was selected, press     to select 
System, and press     to select system.

Press     to select Start Scan, and press OK to 
start auto tuning.

If you are able to receive broadcasts from 
more than one region or transmitter you will be 
prompted to choose via an OSD menu.

E Tuner Mode - Cable

Press     to select ATV and DTV, DTV or ATV,
and press OK.

Tuning Mode
Start Scan
Operator Selection
Scan Type
Start Frequency (MHz)
End Frequency
Modulation
Symbol Rate
Network ID

ATV and DTV

Quick Scan

Auto

Auto

Auto
Auto
Auto

OK

Previous settings will be lost ! 
Press EXIT for no change.

Back

RETURN

Edit

Press     to select Operator Selection, and 
press     to select Operator Selection. 

SHARP_LE144E_Rev1_GB_English.indd   12

SHARP_LE144E_Rev1_GB_English.indd   12

2012/09/13   17:43:59

2012/09/13   17:43:59

ENGLISH

E Channel Edit

Channel Edit allows you to change the channel number 
or the channel name.

Press     to select desired channel and press 
OK

.

Press     to select an item, then press      to 
change the data, and then press OK.

Manual fine tuning

1

BG

P

C 69

0

í í í í í

Back

RETURN

Select

Change

Save

OK

A

B

C

D E F G

H

I

 Position:

The number to be pressed on the remote 
control.

 System: 

Specific to certain areas.

 Colour system: 

Factory set to Auto, should only be changed 
if problems are experienced, i.e. NTSC input 
from external source.

 Skip:  

 Means nothing has been stored or the 

facility to skip the channel is On.

 Signal 

Class:

The channel classification.

 Channel:

The channel number on which a station is 
being broadcast.

 Searching:

Search up and down for a signal.

  Manual fine tuning:

Turn on to execute fine tune function. 
Turn off to execute manual fine tune function.

  Station:

Station identification. Use the         buttons 
to enter up to seven characters.

Press OK to save.

Press MENU.
Press     to select Setup, and press OK.
Press     to select DTV Manual Tuning, and press 
OK

.

E DTV mode - Antenna

Press     to select RF Channel and press     to 
select or use the digit buttons on the remote to 
enter a channel.

OK

RF Channel
Start Scan

5

Signal Strength
Quality

Weak

Average

Strong

Poor

Back

RETURN

Edit

Input

0−9

Press     to select Start Scan and press OK to 
start tuning.

E DTV mode - Cable

Press     to select Frequency, Modulation or 
Symbol Rate, and use the digit buttons on the 
remote to define the information or select Auto 
for tuning.

OK

Frequency
Modulation
Symbol RatG
Start Scan

113.000 MH\

QAM 16

4000 KS/s

Signal Strength
Quality

Weak

Average

Strong

Poor

Back

RETURN

Edit

Input

0−9

Press     to select Start Scan and press OK to 
start tuning.

SHARP_LE144E_Rev1_GB_English.indd   13

SHARP_LE144E_Rev1_GB_English.indd   13

2012/09/13   17:44:01

2012/09/13   17:44:01

NOTE
•  To view a locked channel, you must enter a password. 

When you select a locked channel, a password prompt 
message pops up.

You can enable subtitles for each TV channel.
Subtitles are broadcasted via teletext or DVB-T digital 
broadcasts. With digital broadcasts, you have the 
additional option of selecting a preferred subtitle 
language.

E Subtitle Display

Press     to select On to display subtitle always.
Select Off to close subtitles.

E Subtitle Type

When watching channels with hearing impaired service, 
you can enable the subtitle commentary for the hearing 
handicapped. For digital channels only. 
(Normal/Hearing Impaired)

E Digital Subtitle Language or 2nd

Press     to select a desired subtitle language.

NOTE
•  If your selected subtitle language is not broadcast, the 

default language subtitle will be displayed.

•  If the 1st Subtitle language you selected is not available, 

the 2nd Subtitle language will be displayed.

E Audio Type

When watching channels with hearing impaired service, 
you can enable the subtitle commentary for the hearing 
handicapped. For digital channels only. 
(Normal/Hearing Impaired)

E Audio Language or 2nd

Press     to select a desired audio language.

Lock TV channels or connected devices with a 
four-digit code to prevent children from watching 
unauthorized content.

New Password
Confirm Password

Enter your password by using the digit buttons on the 
remote control.

NOTE
•  If you forget your password, enter “1276” to override 

any existing passwords.

Press MENU.
Press     to select Setup, and press OK.
Press     to select DTV Settings, and press OK.

Back

RETURN

5HíQXPEHU

Skip

3RViWiRQ

803
804
805
806
807
805

1aPH

Rossia 1
Rossia 24
NTV
TR. 5 kaPal
BiEiJoQ
+264 +'0oYiQJ

SoUW

OK

E Re-number

Press the Red button on the remote to renumber 
the highlighted channel.

Edit the channel number using the digit buttons 
on the remote and press OK. 

E Skip Channels

Channel Skip allows you to skip one or more channels 
when pressing P     on the remote to switch between 
channels.

Press the Blue button on the remote. 
A 

 icon appears.

E Channel Sort

Channel sort allows you to reorder the channels.

Press     to select desired channel and press 
OK

. A tick icon appears.

Press     to select the channel you wish to 
swap and press OK. 
The positions of the two channels are swapped.

E Skip Channels

Press     to highlight the skip ( 

 ) box.

Press OK. A tick appears in the box.

E Parental Control

Lock TV channels to prevent children from watching 
certain channels.

Press     to highlight the lock ( 

 ) box.

Press OK. A tick appears in the box.

If you have already set the password, enter it here. 
If the password had not been set, see Password to 
set a new password.

SHARP_LE144E_Rev1_GB_English.indd   14

SHARP_LE144E_Rev1_GB_English.indd   14

2012/09/13   17:44:04

2012/09/13   17:44:04