DOWNLOAD Sharp LC-32GA5E (serv.man21) Service Manual ↓ Size: 2.57 MB | Pages: 36 in PDF or view online for FREE

E

Press MENU and the menu screen displays.

Press c/d to select “SETUP”.

1 Perform steps 1 and 2 in Common Operation.
2 Press a/b to select “AUTO INSTALLATION”, and

then press OK.

3 Press c/d to select the desired language for the

on-screen display.

4 Press b to select “SELECT COUNTRY”, and press

c/d to select your country.

5 Press OK to start Auto Channel Preset.

• You do not need to do anything during the

6 When the Auto Channel  Preset has been

completed, the “EDIT” menu screen is displayed.

1 Select the programme number you want to preset

with Programme select (0-9) or Programme List
(a/b).

2 Perform steps 1 and 2 in Common Operation.
3 Press a/b to select, “MANUAL TUNE”,  and then

press OK.

4 Press  a/b to select the desired menu item

(Example: “TYPE”, “SYSTEM” etc).

5 Press c/d or Programme select (0-9) to  select/

adjust.

E

In this menu you can perform the Initial Auto Installation
again.
Using this routine, you can select the on-screen display
“SELECT LANGUAGE”, set the “SELECT COUNTRY”,
and automatically search for and store all the
receivable TV and FM radio channels.
• Automatic Channel Sorting System (ACSS): The

TV set searches for frequencies, memorises the
channels found, and sorts them (according to
technical criteria).
For TV  channels: from Pr-01 to a maximum of
99 programmes.
For FM RADIO channels: from Pr-01 to a maximum
of 40 programmes.

• This tuning process may take several minutes to

perform.

When the automatic search has been completed, the
“EDIT” menu (Stored Programmes) will appear on
screen and you can change the order of the channels,
delete channels, and change or give the channels an
eight-letter name. (See page 20.)

E

Perform the procedure to search for and store new TV
programmes after the First Installation routine.
(e.g. when a new TV broadcasting station being
installed on your geographic area).

✔ TYPE

Select your desired item to your preference from the
two items of “AERIAL” or “CABLE”.

✔ SYSTEM

For more information, see the table “Corresponding real
channel” on page 29.

L/L’

CH-02 — CH-10

B/G

CH-02 — CH-20

I

CH-01 — CH-09

D/K

CH-02 — CH-12

B/G, D/K, I,
L/L’

CH-21 — CH-69

L/L’

CC-01 — CC-74

B/G

CC-01 — CC-55

CH-75 — CH-79

I

CC-01 — CC-68

D/K

CC-01 — CC-41

LC-26/32/37GA5E(E)_b

04.11.30, 9:49 AM

19

✔ CHANNEL

CHANNEL: Real Channel Number (See the table

in SYSTEM on page 19.)

• Receivable channels depending on TV norm (Band,

System, etc.), installation site, and range.

✔ MODE

This feature allows you to set the programmes to “TV”,
“VCR” or “SKIP” mode.

TV: If the TV signal is weak the image can shake. In

this case put it in TV mode.

VCR: In some cases, the upper part of the picture

may be distorted when receiving signal from a
VCR via RF terminal on the TV set. Selecting this
option will help to reduce this effect.

SKIP: Allows you to SKIP programmes you do not

want to view when using P (r/s). (Use
Programme Select (0–9) or Programmes list (a/
b) to display these channels)

✔ FINE TUNE

When a preset programme channel is not exactly
tuned, you can fine-tune the channel in this mode.

✔ SCAN

E

In this menu you can change the order of the channels,
delete channels, and change or give the channels an
eight-letter name.

1 Press a/b to change the letters, and press c/d

for changing the position of the cursor.

2 Press OK to “STORE” the name.
3 Press END to exit.

• The position of the cursor will appear on screen in a yellow

background.

• Letters A to Z of the alphabet, a blank space and the

numbers 0 to 9 will appear sequentially.

1 Press  OK to delete the channel selected on the

list.

2 Press END to exit.

• When you delete a channel, the channels that follow it on

the list will automatically rearrange themselves by moving
up one programme (Pr) place, to restore the space of the
cancelled channel.

1 Press  a/b to move the channel to the required

position (Pr).

2 Press OK to “STORE”.

• When you change of site a channel, the located channels

next are rearranged. By such reason, it is advisable to
order the channels, being begun by which you wish to
place in the first position (Pr1).

• Press and hold c/d, until the best tuning position is found,

for the best picture and sound, and then press OK to
memorise.

Press c/d to “SCAN” between the existing channel
and the previous or next one.
• The tuning sequence will stop when a signal is

detected.

• If the signal is not the required channel, press c/d

to continue searching.

• If the signal is the required channel, press OK to

memorise.

c Button

d Button

It searches the
following channel
downward

It searches the
following channel
upward

c/d

TV or RADIO

To select the
programmes of “TV” or
“RADIO”.

a/b

SELECT

To select a programme
from the list.

DELETE

Use this mode for
cancelling channels
which are badly tuned or
repeated.

EDIT

Use this mode for giving
a name made up of
eight-letter to the
channels or for changing
the one which appears
on some channels.

SORT

Use this mode for
sorting the channels into
the desired programme
(Pr).

EXIT

To return to the normal
screen.

LC-26/32/37GA5E(E)_b

04.11.30, 8:26 AM

20

✔ TTX CHAR. SET (TELETEXT

You can select a character set from the items listed on
the screen.

✔ WSS (Wide Screen Signaling)

WSS allows a television to switch automatically among
the different screen formats.
Select “ON” to activate the “AUTO” function, located
in the “WIDE MODES” menu screen (page 25).

✔ ROTATION

You can set the orientation of the picture by this
function.

[NORMAL]

[MIRROR]

[UPSIDE

DOWN]

[ROTATE]

E

In this menu, you can configure the input terminals in
concordance with the connected device and the signal
type.

✔ POWER MANAGEMENT

After connecting to PC, you can select ON/OFF to
disappear the background image on the TV when the
TV stops receiving the image signal from PC in the PC
INPUT mode.

E

Power control setting allows you to save energy.

✔ NO SIGNAL OFF

When set to “ON”, the power will automatically shut
down if no signal inputs for 15 minutes.

✔ NO OPERATION OFF

When set to “ON”, the power will automatically shut
down if there is no operation for 3 hours.

DUTCH
ENGLISH
FINNISH
FRENCH
GERMAN
GREEK
ITALIAN

POLISH
PORTUGUESE
RUSSIAN
SPANISH
SWEDISH
TURKISH

✔ OSD LANGUAGE

You can select a language from setup menu. Select
from among 13 languages.

E

The “GENERAL SETUP” menu consists of the generally
used setting items.

✔ FACTORY SETTINGS

Press OK to set the factory presets.

1 Press MENU and the menu screen displays.
2 Press c/d to select “SETUP”.
3 Press  a/b to select “GENERAL SETUP”, “AV

SETUP”, or “POWER CONTROL”, and then press
OK.

4 Press a/b to select the desired menu item.
5 Press c/d to  select/adjust.

VCR, DVD, AUTO

VCR, DVD, AUTO

VCR, DVD, AUTO

SD, HD

EXT 3 S-VIDEO VCR, DVD, AUTO

For viewing the signals from a Video
Cassette Recorder equipment through
the selected input terminal.

For viewing the signals from a Digital
Video/Versatile Disc equipment through
the selected input terminal.

For auto detection of the input signal
type.

For viewing the signals from video
equipment, with output COMPONENT of
High Definition, connected through the
EXT4 input terminals.

For viewing the signals from video
equipment, with output COMPONENT of
Standard Definition, connected through
the EXT4 input terminals.

*

1

 Component signal

LC-26/32/37GA5E(E)_b

04.11.30, 8:27 AM

21

You can connect many types of external equipment to your TV, like a decoder, VCR, DVD player, PC, game
console and camcorder.
To view or select the input source, see the operations below.

Using b on the TV: Press b. Each time you press b, the input source will change.
Using b on the remote control: Press b. Press a/b to select your desired input source, and then press
OK.

You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.

You can use the EXT 2 terminal when connecting a
VCR and other audiovisual equipment.

• TV-VCR advanced “AV LINK” systems may not be

compatible with some external sources.

• Before connecting external equipment to your TV, see page 21.

LC-26/32/37GA5E(E)_c

04.11.30, 8:28 AM

22