DOWNLOAD Sharp LC-32GA5E (serv.man21) Service Manual ↓ Size: 2.57 MB | Pages: 36 in PDF or view online for FREE

1 Perform steps 1 and 2 in Common Operation.
2 Press  a/b to select “CHILD LOCK”, and then

press d.

3 Press  a/b to select “CHANGE PIN”, and then

press OK.

4 Input your PIN with 0–9, and then press OK.
5 Input new PIN with 0–9, and then press OK.

1 Perform steps 1 and 2 in Common Operation.
2 Press  a/b to select “CHILD LOCK”, and then

press d.

3 Press  a/b to select “CLEAR LOCK”, and then

press OK .

4 Input your PIN with 0–9, and then press OK.

1 Perform steps 1 and 2 in Common Operation.
2 Press  a/b to select “CHILD LOCK”, and then

press d.

3 Press  a/b to select “LOCK ALL”, “LOCK

PROGRAM”, and then press OK.

4 Input the desired four-digit “PIN” with 0–9, and then

press OK.

5 Press  a/b to select the desired menu item

(Example: “TYPE”, “START” etc).

6 Press c/d to  select/adjust or input 0–9, and then

press OK.

1 Select the programme you wish to record at the

specified time, using Programme select (0–9),
Programmes List (a/b) or P (r/s).

2 Perform steps 1 and 2 in Common Operation.
3 Press  a/b to select “AV-LINK”, and then press

d.

4 Press a/b to select “AVL TIMERS”, and then press

OK.

5 Press  a/b to select the desired menu item

(Example: “DATE”, “START” etc).

6 Press c/d to  select/adjust or input 0–9.

LC-26/32/37GA5E(E)_b

04.11.30, 8:26 AM

15

E

You can set “DATE”, “TIME” (Clock), “ON TIMER”
(Wake-up timer) and “OFF TIMER” (Sleep timer) to
automatically turn on and off the TV or RADIO at the
specified time.
You can also set “ON TIMER” to automatically turn on
at the specified sound volume.
The Timer functions that turn power on at the specified
time do not work unless the clock has been adjusted.
Be sure to adjust the “DATE” and the “TIME” (Clock)
first.

• The “FEATURE TIMERS” menu screen can be displayed

directly by pressing TIMER.

• “DATE” and “TIME” are automatically set/corrected via the

Teletext broadcast when available.

• When you set “ON TIMER”, the WAKE-UP indicator lights

up Red while in the Stand-by mode.

• “ON TIMER” and “OFF TIMER” will not be activated if the

power is turned off with a (Power) on the TV.

• In the event of a power cut, disconnection from the plug

or TV switch, all the data on the “ON TIMER” and  “OFF
TIMER” will be cancelled.

• As a safety precaution, in the case of nobody being home

when the TV or RADIO switches on automatically, the TV
will return to Stand-by mode after 120 minutes; if it is to
continue to run, any button on the remote control functions
should be pressed.

• The “OFF TIMER” data will be cancelled if you turn off the

TV by B (Stand-by/On) on the remote control.

• You can check the timer settings by pressing p (Display/

Info.)

✔ DATE/TIME

Current date and Current time are necessary to set in
order to be able to run the Timer functions.

Automatic adjustment: If a programme with Teletext

is being received, the “DATE” and “TIME” can be
adjusted automatically with that signal’s clock.

Press m to synchronize “DATE” and “TIME”.

• If a signal via satellite is being received, or if correct

date or time, cannot be obtained, “DATE” and “TIME”
will have to be adjusted manually.

Manual adjustment: Press the Programme select

(0–9) to adjust “DATE” and “TIME” manually.

✔ ON TIMER (Wake-up timer)

The “ON TIMER” is used to programme switching ON
the TV or RADIO during the 24 hours of the day.
When “ON TIMER” has been set, press B on the
remote control to put the TV into Stand-by mode.
When the preset time is reached, the TV or RADIO
turns ON.

✔ OFF TIMER (Sleep timer)

The “OFF TIMER” is used to programme switching the
TV to Stand-by mode, after the set length of time has
passed.

✔ RADIO/TV

For the “ON TIMER” (Wake-up timer), you can select
the mode (TV or RADIO) to automatically turn on.

✔ VOL. LIMIT (VOLUME LIMIT)

For the “ON TIMER” (Wake-up timer), you can adjust
the sound volume when TV or RADIO automatically
turns on.

0–9 or m

DD/MM/YY
(day/month/year)

0–9 or m

HH:MM
(hour:minute)

HH:MM (hour:minute)

c/d

- - : - -
(To cancel “ON TIMER”)

c/d

OFF, 30, 60, 90 or 120
(minutes)

LC-26/32/37GA5E(E)_b

04.11.30, 8:26 AM

16

✔ AVL TIMERS (AV-LINK TIMERS)

In this menu you can set a late start and stop time for
a recording.

■ DATE
Set the recording date.

■ START
Set the time of recording beginning.

■ STOP
Set the time of recording end.

■ MODE
If you want to make additional recordings at the same
time each day, from Monday to Friday or weekly, select
“DAILY”, “MON-FRI” or “WEEKLY”.

■ SPEED
Use this setting to change recording speed between
“SP” Standard-Play and “LP” Long-Play.
Standard-Play gives the best picture quality. Long-Play
provides the longest recording time.

• “SPEED” (SP/LP) can be changed only if the video has

these functions available.

E

The “DEMO” (demonstration) function allows you to
see all the menus implemented in this TV.

• “MODE” (UNIQUE/MON-FRI/DAILY/WEEKLY) can be

changed only if the video has these functions available.

E

This feature can only be used with Next View, Smart
Link, Easy Link and Megalogic compatible VCR.
This “Intelligent” communication system allows
controlling some VCR functions from the TV and vice
versa.
For example, it is possible to programme the VCR timer
recording from the TV or record the signal currently
being displayed on the TV regardless of the signal
source.
In this case, the VCR and the TV must be connected
through the 21-pin Audio/Video connector especially
available for this function (EXT2 terminal in this TV)
using the fully-wired SCART cable.
Refer to your VCR operation manual for further
information.

✔ AVL CONTROL (AV-LINK CONTROL)

Use this menu to “PRESET DOWNLOAD” and to
“RECORD WHAT YOU SEE”.

DD/MM/YY (day/month/
year)

HH:MM (hour:minute)

HH:MM (hour:minute)

c/d

UNIQUE, MON-FRI,
DAILY or WEEKLY

c/d

LP or SP

Automatically transfers
the channel preset
information from the
tuner on the TV to the
one on the connected
VCR via the EXT2
terminal.

While the VCR is in
standby mode, it
automatically turns on
and starts recording the
image from the TV
(Record what you see).

The TV indicates the
VCR that must stop the
recording.

LC-26/32/37GA5E(E)_b

04.11.30, 9:49 AM

17

NONE: To cancel the protection from the selected

programme.

ALWAYS: The access to the selected programme

will be protected always.

TIMER: The access to the selected programme will

be protected during the programmed period. If
you have set “TIMER”, it is indispensable to set
“START” and “STOP” period.

AUTO(VPS): To activate the automatic

protection.The selected programme will only be
blocked when it receives the “VPS” signal*.

✔ LOCK PROGRAM

To set a Child Lock for individual programmes.

• Access to protected modes: When one or several

programmes are protected, the TV will block any attempt
to gain access to them and the instruction “INPUT YOUR
PIN” will appear on the screen.
In order to view these programmes you must press 0–9 of
your Secret Number “PIN” and OK.
If the “PIN” is not entered, only P (r/s) for changing
programmes, a (Power) on the TV and (B) (Standby/
On) on the remote control will operate.

NONE: To cancel the protection.
ALWAYS: The access to the TV will be protected

always.

TIMER: The access to the TV will be protected

during the programmed period. If you have set
“TIMER”, it is indispensable to set “START” and
“STOP” period.

✔ LOCK ALL

To set a Child Lock to the whole TV.

• Access to protected modes: When the TV is protected

in “LOCK ALL” way, it will be blocked when switched on
and the instruction “INPUT YOUR PIN” will appear on the
screen.
In order to view your TV you must press 0–9 of your Secret
Number “PIN” and OK.
If the “PIN” is not entered, only a (Power) on the TV and
(B) (Standby/On) on the remote control will operate.

■ TYPE
To set the desired period you wish locked the TV.

■ START
To enter the hour and minutes, from the beginning of
protection.

■ STOP
To enter the hour and minutes, to the end of protection.

■ TYPE
To set the desired period you wish locked the TV.

■ PROGRAMME
Select the programme number you want to protect.

■ START/STOP
Refer to “START” and “STOP” in “LOCK ALL.” (left side
of this page)

* When the programme that is being shown is not suitable

for children, some broadcasting stations send this “VPS”
signal, for activating the automatic protection.

✔ CLEAR LOCK

This option enables you to erase all the adjustments
made to the CHILD LOCK function except the PIN.

✔ CHANGE PIN

To set a new PIN.

E

Use the “CHILD LOCK” function to block access to
the television by means of a 4-digits code (PIN).
The protection can apply to the television itself “LOCK
ALL” or to specific programmes “LOCK PROGRAM”.
With the “CHILD LOCK” function, you can also
programme a time period during which the TV or the
programmes will be protected. (Your children cannot
select the programme, which you locked).

• Refer to page 31 for “IMPORTANT NOTE ON

DISENGAGING ADVANCED CHILD LOCK”.

• If the protection is timed, the blocking of the TV or

programmes will only occur during the time period
programmed.

• In order for the timed protection to function correctly, the

internal clock must be set at the right time. To check the
time setting, see DATE/TIME on page 16.

Programme number you
want to set.

HH:MM (hour:minute)

HH:MM (hour:minute)

LC-26/32/37GA5E(E)_b

04.11.30, 8:26 AM

18