Sharp LC-32DH57E (serv.man11) User Manual / Operation Manual ▷ View online
7
Quick guide
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending
on your TV installation and connection.
on your TV installation and connection.
Preparation
Connect an antenna cable to the
antenna terminal (Page 8).
antenna terminal (Page 8).
If necessary, insert a CA
card into the CI slot to watch
scrambled broadcasts (Page 15).
card into the CI slot to watch
scrambled broadcasts (Page 15).
Connect the AC cord to the TV
(Page 8).
(Page 8).
Product shape varies in some
countries.
n
o
p
Run the
initial
settings
Turn on the power using
a on
the TV (Page 10).
Run the initial auto installation
(Page 9).
(Page 9).
Language setting
Português
English
Home/Store setting
STORE
HOME
Country setting
Finland
Austria
Installation start
confirmation
confirmation
Skip
Start
Start searching
channels
n
o
✔
✔
✔
✔
Watch TV
Congratulations!
Now you can watch TV.
Now you can watch TV.
If necessary, adjust the antenna
to attain maximum signal
reception (Page 9).
to attain maximum signal
reception (Page 9).
Connect external
devices
Connect external devices
such as a DVD player/
recorder as instructed (Pages
13
such as a DVD player/
recorder as instructed (Pages
13
_14).
Connect external audio
devices such as speakers/
amplifier as instructed (Page
15).
devices such as speakers/
amplifier as instructed (Page
15).
n
o
n
o
8
Quick guide
Before turning on the power
*
Standard DIN45325 plug (IEC 169-2) 75
q coaxial cable
AC cord (Product shape varies in some countries)
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither
type causes unnecessary electrical wave emissions or interference.
type causes unnecessary electrical wave emissions or interference.
n
o
*
Place the TV close to the AC outlet,
and keep the power plug within
reach.
and keep the power plug within
reach.
Supplying power to the antenna
When an active antenna is used, power must be supplied to the antenna using the following procedures after
connecting the antenna cable to the antenna terminal on the rear of the TV in order to receive terrestrial digital
signals.
connecting the antenna cable to the antenna terminal on the rear of the TV in order to receive terrestrial digital
signals.
Press
@ and the “MENU” screen displays.
Press
c/d to select “Setup”.
Press
a/b to select “Antenna Setup”, and then press ;.
Press
a/b to select “Supply Voltage”, and then press ;.
Press
c/d to select “On”, and then press ;.
1
2
3
4
5
2
3
4
5
Mounting the TV on a wall
This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 5). The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
When using wall mount bracket AN-37AG5
You can check the centre of the TV screen using the mark engraved on the wall mount bracket when mounting the TV
on the wall.
AN-37AG5
LC-32DH57E: The centre of the TV screen is 24.5 mm above the mark “A” on the wall bracket.
on the wall.
AN-37AG5
LC-32DH57E: The centre of the TV screen is 24.5 mm above the mark “A” on the wall bracket.
•
•
•
•
•
9
Quick guide
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
Confirm the following before turning on
the power
the power
Is the antenna cable connected?
Is the AC cord plugged in?
Is the AC cord plugged in?
E
E
E
Press
a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
Português
English
Press
a/b to select the desired language, and
then press
;.
Selecting the location of the TV.
STORE
HOME
Press
a/b to select where you will use this TV,
and then press
;.
HOME: “STANDARD” will be the default value for the “AV
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV MODE” setting. If the “AV MODE” is changed,
the TV will automatically switch back to “DYNAMIC
(Fixed)” when there is no signal input from the TV or
remote control unit for 30 minutes.
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV MODE” setting. If the “AV MODE” is changed,
the TV will automatically switch back to “DYNAMIC
(Fixed)” when there is no signal input from the TV or
remote control unit for 30 minutes.
Setting the country.
Finland
Austria
Press
a/b to select your country or area, and
then press
;.
This setting screen only appears during the first
installation.
installation.
1
•
2
3
•
•
4
•
Starting channel search.
Skip
Start
Press
a/b to select “Start” or “Skip”, and then
press
;.
If you want to search for more broadcasts, execute
“Additional Search” from the “Programme Setup” menu
(Page 21).
“Additional Search” from the “Programme Setup” menu
(Page 21).
The TV searches for, sorts and stores all
the receivable TV stations according to
their settings and the connected antenna.
the receivable TV stations according to
their settings and the connected antenna.
To abort the initial auto installation in progress, press
RETURN
RETURN
.
NOTE
If you turn off the power on the TV after performing step 5 or
if you select “Skip” on step 5, the initial auto installation wizard
will not appear. The auto installation function allows you to
execute the installation again from the “Setup” menu (Page 20).
The initial auto installation wizard will go off if you leave the TV
unattended for 10 minutes before searching for channels in
step 6.
After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer to
Password/Parental lock settings
if you select “Skip” on step 5, the initial auto installation wizard
will not appear. The auto installation function allows you to
execute the installation again from the “Setup” menu (Page 20).
The initial auto installation wizard will go off if you leave the TV
unattended for 10 minutes before searching for channels in
step 6.
After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 24).
When “Italy” is selected in the country setting, the default PIN is
automatically set to “1234” and the default age restriction value
is set to 18.
automatically set to “1234” and the default age restriction value
is set to 18.
Checking signal strength
If you install an antenna for the first time or relocate it, you
should adjust the alignment of the antenna to receive a
good reception while checking the antenna setup screen.
should adjust the alignment of the antenna to receive a
good reception while checking the antenna setup screen.
Press
@ and the “MENU” screen
displays.
Press
c/d to select “Setup”.
Press
a/b to select “Antenna Setup”, and
then press
;.
Press
a/b to select “Signal Strength”.
NOTE
The values of “Signal Strength” indicates when to check the
appropriate alignment of the antenna.
appropriate alignment of the antenna.
5
•
6
•
•
•
•
•
1
2
3
3
4
•
10
Watching TV
Daily operation
Switching on/off
Turning on/off the power
Press
a on the TV.
Switch it off by pressing
a on the TV.
Standby mode
To standby mode
If the TV is switched on, you can switch it to standby by
pressing
pressing
B on the remote control unit.
Switching on from standby
From standby, press
B on the remote control unit.
TV indicator status
B (Standby/On
indicator)
Status
Off
Power off
Green
Power on
Red
Standby
NOTE
If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even when
a is turned off.
sure to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even when
a is turned off.
Switching between digital and
analogue broadcasts
analogue broadcasts
Watching digital
broadcasts
broadcasts
Watching analogue
broadcasts
broadcasts
001 to 900 ch
From 901 ch
NOTE
If the TV cannot search digital broadcasts, the analogue
broadcasts are set from 001 channel.
broadcasts are set from 001 channel.
Changing channels
With
:r/s:
With 0
_9:
E
E
•
•
•
Selecting an external video
source
source
Once the connection is made,
press
press
b to display the “INPUT
SOURCE” screen, and then press
b or
b or
a/b to switch over to
the appropriate external source
with
with
;.
INPUT SOURCE
TV
EXT1
EXT2
EXT3
Selecting a sound mode
For DTV
If multi sound modes are received, each time you press
; the mode switches as follows.
Audio (ENG) : STEREO
L/R
L
R
LR
Audio (ENG) : CH A
Audio (ENG) : CH B
Audio (ENG) : MONO
Press
c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R
L
R
LR
NOTE
The sound mode screen disappears in six seconds.
Selectable items vary depending on the received broadcasts.
Selectable items vary depending on the received broadcasts.
For ATV
Each time you press
;, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
When no signal is input, the sound mode will display “MONO”.
E
•
•
•
E
•
Click on the first or last page to see other LC-32DH57E (serv.man11) service manuals if exist.