Sharp LC-32DH57E (serv.man11) User Manual / Operation Manual ▷ View online
19
Basic adjustment
Type
Audio
Item
Normal
Audio stream is output normally.
Audio Description
Selecting this item enables you to adjust the
settings for the visually impaired (see below).
settings for the visually impaired (see below).
Hard of Hearing
Audio for the hearing impaired is output on the
TV speakers by default when the programme
contains audio information.
TV speakers by default when the programme
contains audio information.
Audio Description
Audio
Available only when you set “Audio Description” in the
“Type” menu above.
“Type” menu above.
Item
Speaker
When set to “On”, audio for the visually impaired
is output from the TV speakers.
is output from the TV speakers.
Headphone
When set to “On”, audio for the visually impaired
is output from the headphone terminal.
is output from the headphone terminal.
Volume
Adjust the volume of the speakers or
headphones.
headphones.
Automatic volume adjustment
Auto Volume
Option
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control (Auto
Volume) reduces this problem by equalizing levels.
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control (Auto
Volume) reduces this problem by equalizing levels.
Outputting audio only
Audio Only
Option
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
can set the TV off and enjoy audio only.
Item
Off
Both screen images and audio are output.
On
Audio is output without a screen image.
Setting audio input
PC Audio Select
Option
When using the EXT 4 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
Item
HDMI 2
When connecting devices (including a PC) with
DVI/HDMI cable to the HDMI 2 terminal and
inputting analogue audio signals from the AUDIO
(R/L) jack*.
DVI/HDMI cable to the HDMI 2 terminal and
inputting analogue audio signals from the AUDIO
(R/L) jack*.
EXT 4 (RGB)
When connecting a PC to the EXT 4 terminal,
and inputting analogue audio signals from the
AUDIO (R/L) jack.
and inputting analogue audio signals from the
AUDIO (R/L) jack.
HDMI signals have priority when the signal includes audio.
NOTE
You must set this to “EXT 4 (RGB)” when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI 2” is set, there will be no sound output.
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI 2” is set, there will be no sound output.
*
•
20
Basic adjustment
Power Save Settings
ECO
Energy Save
No Signal Off
[Disable]
[Disable]
[Standard]
No Operation Off
Energy Save
ECO
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
Item
Off
The backlight brightness is the same value of
your settings in the selected “AV MODE”.
your settings in the selected “AV MODE”.
Standard
Reduces the backlight brightness by 20 %.
Advanced
Reduces the backlight brightness by 30 %.
NOTE
This function does not work when “AV MODE” is set to
“DYNAMIC (Fixed)”.
“DYNAMIC (Fixed)”.
“Energy Save” status icons
Icon
Description
“Energy Save” is set to “Standard”.
“Energy Save” is set to “Advanced”.
No Signal Off
ECO
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
standby mode if there is no signal input for 15 minutes.
No Operation Off
ECO
The TV will automatically enter standby mode if no
operations are performed during the time span you set
(“30 min.” or “3 hr.”).
operations are performed during the time span you set
(“30 min.” or “3 hr.”).
•
E
Channel Settings
Auto Installation
Auto Installation
Setup
The TV automatically detects and stores all available
channels in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
channels in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting “Yes” on the screen, you
can set language and channel search the
same as in the initial auto installation.
can set language and channel search the
same as in the initial auto installation.
NOTE
PIN input is required when executing “Auto Installation”. The
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 24).
You cannot set the Home/Store setting and the country
setting in “Auto Installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
setting in “Auto Installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
Channel detail settings
Programme Setup
Setup
You can reconfigure the DTV/ATV channel settings
automatically or manually.
automatically or manually.
NOTE
PIN input is required when executing “Programme Setup”.
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 24).
•
•
•
21
Basic adjustment
Additional Search
Use this menu to add new channels automatically after
auto installation has been completed.
auto installation has been completed.
Channel Edit
This menu allows you to reconfigure some settings for
the channel currently selected.
the channel currently selected.
Label
When a TV channel sends its Network Name, the “Auto
Installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Press
a/b/c/d to select each character
of the new name for the channel, and then
press
press
;.
Repeat step 1 above until the name is fully
spelt out.
spelt out.
NOTE
The name can be six characters or less.
If a channel name is less than six characters, select “END” to
set the channel name.
If a channel name is less than six characters, select “END” to
set the channel name.
Frequency
You can adjust the frequency to the desired position (only
for analogue channels).
for analogue channels).
NOTE
Adjust while checking the background picture as a reference.
You can set the frequency by pressing
You can set the frequency by pressing
c/d. Each time you
press
c or d, the value is changed in increments of 0.05 MHz.
Colour System
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”, “NTSC”) (only for analogue channels).
“PAL”, “SECAM”, “NTSC”) (only for analogue channels).
Sound System
Select the optimum sound systems (Broadcasting
systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”,
“A2 D/K1”, “I”, “L”, “L’”) (only for analogue channels).
systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”,
“A2 D/K1”, “I”, “L”, “L’”) (only for analogue channels).
1
2
•
•
•
•
•
•
Channel Skip
Channels with a
✔ mark are passed over when pressing
:r/s on the TV or remote control unit.
Press
a/b to select the desired channel.
Press
; to set a
✔ mark at the channel that
you want to skip.
Channel Sort
The item position of channels can be sorted.
Press
a/b to select the channel whose item
position you want to move, and then press
;.
;.
DTV
006
Channel
Number
Number
Channel
Name
Channel
Sort
Monosco 576-1
DTV
007
Monosco 576-2
✔
Press
a/b to move it to the desired position,
and then press
;.
DTV
006
Monosco 576-2
DTV
007
Monosco 576-1
Channel
Number
Number
Channel
Name
Channel
Sort
Repeat steps 1 and 2 until all desired channel
items are sorted.
items are sorted.
Decoder
When connecting a decoder to the TV, you need to select
channels that need to be decoded.
channels that need to be decoded.
Channel Lock
When the channel is locked, you must enter your PIN
whenever you tune to the channel.
whenever you tune to the channel.
NOTE
See “Child Lock” for setting a PIN.
When “Channel Lock” is set for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing RETURN while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child Lock” temporarily until the power is
turned off.
When “Channel Lock” is set for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing RETURN while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child Lock” temporarily until the power is
turned off.
1
2
2
1
2
3
•
•
•
•
22
Basic adjustment
Password/Parental lock settings
Child Lock
Setup
Allows you to use a PIN to protect certain settings from
being accidentally changed.
being accidentally changed.
NOTE
PIN input is required when executing “Child Lock”. The default
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 24).
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 24).
Change PIN
Register a four-digit password number to use the “Child
Lock” function.
Lock” function.
Enter the four-digit number as a PIN using
0
0
_9 numeric buttons.
Enter the same four-digit number as in step
1 to confirm.
1 to confirm.
NOTE
To view a locked channel, you must enter the PIN (See page 21
for locking channels). When you select a locked channel, a PIN
prompt message pops up. Press RETURN to display the PIN
input window.
for locking channels). When you select a locked channel, a PIN
prompt message pops up. Press RETURN to display the PIN
input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
Parental rating
This function allows DTV channels to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
prevents children from watching violent or sexual scenes
that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings
used exclusively in France.
Refer to page 32 for details about ratings.
used exclusively in France.
Refer to page 32 for details about ratings.
Language Settings
Language
Setup
You can select an OSD language from the “Setup”
menu. Select from among 23 languages. Refer to the
OSD language
menu. Select from among 23 languages. Refer to the
OSD language
column in the specification table for the
selectable languages (Page 30).
•
1
2
•
•
•
•
Subtitle
Digital Setup
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
subtitles for the hearing impaired) to display if subtitles
are available.
Selectable items
1st Language
2nd Language
For hearing impaired
2nd Language
For hearing impaired
E
E
E
E
E
Switching subtitle languages
Each time you press
[ on the remote control unit, the
subtitle switches.
1st Language
Off
2nd Language
• • • • • •
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over each
of the subtitle language settings (e.g., “1st Language”,
“2nd Language”, etc.).
of the subtitle language settings (e.g., “1st Language”,
“2nd Language”, etc.).
EXAMPLE
1st Language
1st Language
(For hearing impaired)
NOTE
Subtitles will not be displayed when the programme does not
contain subtitle information.
contain subtitle information.
Digital Audio Language
Option
Select the preferred language from “1st Digital Audio
Language” (“2nd Digital Audio Language”) to set up
the first (second) priority language for digital audio.
This setting is effective only when more than one audio
language is available.
Language” (“2nd Digital Audio Language”) to set up
the first (second) priority language for digital audio.
This setting is effective only when more than one audio
language is available.
Switching the multi audio languages
Each time you press
; on the remote control
unit, the audio language switches.
NOTE
You can set up to two preferred multi audio languages if the
audio languages are available.
audio languages are available.
E
E
•
E
•
Click on the first or last page to see other LC-32DH57E (serv.man11) service manuals if exist.