Sharp LC-32DH500E (serv.man23) User Manual / Operation Manual ▷ View online
Introduction
Remote control unit
1 B Standby/On
Enter standby mode or turn on the
power.
2 p Channel information / EPG
2 p Channel information / EPG
(See pages 11 and 21.)
3 DTV
MENU
Display the MEDIA PLAYER screen.
4 0–9
Set the channel in TV mode.
Set the page in Teletext mode.
5 A Flashback
Press to return to the previous
selected channel or external input
mode.
6 DTV
6 DTV
Change between ATV and DTV
mode.
7 f Picture
7 f Picture
format
Change between different picture
formats (see page 21.)
formats (see page 21.)
8 Z Sound Mode
Change between different sound
modes established.
modes established.
9 a/b/c/d (Cursor)
Select a desired item on the
setting
screen.
OK
Execute a command within the
menu
screen.
TV/DTV: Display the programme
list. (See page 21.)
10 END
Exit the menu screen.
11 EPG
DTV: To display EPG (Electronic
Programme Guide) screen.
(See page 11.)
12 m Teletext
ATV:
ATV:
Select the TELETEXT mode
(See page 12.)
DTV: Select DTV (MHEG-5) data
broadcasting
broadcasting
or
TELETEXT.
Select the sound multiplex mode.
(See
below.)
19 i (+/-) (Volume)
i
(+) Increase the volume.
i
(-) Decrease the volume.
20 P (r/s)
TV/DTV: Select the program or move
up or down the channel list pages.
Input source: Switch to TV or DTV
input mode.
Teletext: Move to the next/previous
page.
up or down the channel list pages.
Input source: Switch to TV or DTV
input mode.
Teletext: Move to the next/previous
page.
21 b Input source
Select an input source.
(See page 10.)
22 RADIO
DTV: Switch between RADIO and
DTV
mode.
•Due to the large variation in
transmitted volume levels in RADIO
mode, some stations will produce
distortion if the volume level is set
too
high.
23 PC
Not
Not
used.
24 MENU
Display the MENU screen.
(See page 17.)
25 RETURN
Not
Not
used.
26 Colour (Red/Green/Yellow/Blue)
TELETEXT: Select a page. (See
page
TELETEXT: Select a page. (See
page
12.)
DTV: The coloured buttons are
used to select correspondingly to
the coloured items in the menu
screen.
27 [ Subtitle for Teletext
screen.
27 [ Subtitle for Teletext
ATV: Subtitles on / off.
DTV: Display the subtitle selection
screen. (See page 12.)
28 k (Reveal hidden Teletext)
(See page 12.)
29 v (Top/Bottom/Full)
Switch the Teletext image to Top,
Bottom or Full.
30 1 (Subpage)
(See page 12.)
13 ESG
Show the favourite list.
14 3 Freeze / Hold
Freeze a picture (TV) or the Teletext
on the screen (See page 12)
on the screen (See page 12)
15 SLEEP
Set the sleep timer on (in units of
10 min. up to max. 4 hr) and off.
16 AV MODE
Select a picture mode (See page 18.)
17 e Mute
Switch the sound on and off.
18 2 Audio mode
When one of the 5 Nordic countries
(Sweden, Norway, Finland, Denmark or
Iceland) is selected in the country setting
of Auto Installation, DTV channels are 4
digits. When another country is selected,
DTV channels are 3 digits
Iceland) is selected in the country setting
of Auto Installation, DTV channels are 4
digits. When another country is selected,
DTV channels are 3 digits
.
3
• Using 2 on the remote control unit
DTV mode
:
Press 2 to open the multi audio screen. (See page 10.)
Analogue TV mode:
Analogue TV mode:
Each time you press 2, the mode switches as illustrated in the following tables
:
Singnal
Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM
CH AB, MONO
Monoaural NICAM MONO, MONO
Singnal
Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monoaural MONO
NICAM TV broadcasts selection
A2 TV broadcasts selection
TV (Front view)
TV (Top and rear view)
Remote control sensor
B (Standby/On) indicator
!
"
LC-32D44E-es.indd 7
2008/02/21 9:50:18
!
%
'
(
"
#
$
SPDIF
&
1
SERVICE
1
2
AUDIO IN (DVI)
DIGITAL
AUDIO
OUTPUT
AUDIO
OUTPUT
SCART 2
SCART 1
RGB
AV
1.COMP / 2.AV
AUDIO IN
AUDIO (R / L)
2
1
USB
JPEG
MP3
MP4
SOFT
MP3
MP4
SOFT
1
2
3
5
4
6
7
8
9
10
11
Introduction
WARNING
Excessive sound pressure from earphones and headphones can cause hearing loss.
Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
•
•
•
a (Power button)
(MENU
button)
b (INPUT SOURCE button)
i
(k/l) (Volume buttons)
P(r
/s
)
(Programme (channel) buttons)
1
USB
terminal
2
COMPONENTS / AV terminals
3
HEADPHONES
jack
4
SCART 1 (AV/RGB) terminal
5
SCART 2 (AV/S-VIDEO) terminal
6
Antenna input terminal
7
OUTPUT (DIGITAL AUDIO) terminal
8
SERVICE connector (jack 3.5mm)
9
HDMI 1 (HDMI/AUDIO-DVI)
10
HDMI 2 (HDMI/AUDIO-DVI)
11
AUDIO input for DVI
12
COMMON INTERFACE slot
13
AC INPUT terminal
4
Remote control unit
(
g1)
AC cord (
g1)
Operation manual (This publication)
•
“AA” size zinc-carbon battery (
g2)
•
Product shape varies in
some countries.
Cojín blando
Preparation
Supplied accessories
1 Lay the TV on a table with the way that the stand would stay out of the table and the screen on the surface of
the cushioning as indicated in the drawing.
the cushioning as indicated in the drawing.
2 Using a star shaped screwdriver of the proper size (no supplied), remove the screws which fasten the stand as
indicated below:
a. Loosen four screws (Approx. a half-turn)
b. Unscrew completely three of four screws (two from the bottom area and the other one from the upper area)
c. Hold the stand in one hand with the way that the it will not fall down on unscrewing the last screw.
b. Unscrew completely three of four screws (two from the bottom area and the other one from the upper area)
c. Hold the stand in one hand with the way that the it will not fall down on unscrewing the last screw.
3
Keep the stand and four screws in case you may need to attach them in the future.
NOTE
•
•
To attach the stand, perform the above steps in reverse order.
How to detach the stand of the TV
• This TV is supplied with the stand attached.
• If you need to detach the stand (e.g. to mount the TV on the wall), read carefully these instructions
• If you need to detach the stand (e.g. to mount the TV on the wall), read carefully these instructions
.
CAUTION
• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before starting to perform, spread a cushioning over the surface of where you will lay the TV on. This will prevent
it from being damaged.
• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before starting to perform, spread a cushioning over the surface of where you will lay the TV on. This will prevent
it from being damaged.
Optional accessory
The listed optional accessories are available for this
LCD colour TV. Please purchase them at your nearest
shop.
LCD colour TV. Please purchase them at your nearest
shop.
Additional optional accessories may be available in the
near future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
near future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
•
No.
Part name
Part number
1
Wall mount bracket
AN-37AG5
Cushion
5
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AA” size zinc-carbon batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
1
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
1
Hold in the tab on the battery cover and pull the cover towards the direction of the arrow.
2
Insert two supplied “AA” size batteries.
• Place batteries with their terminals corresponding to
the (+) and (-) indications in the battery compartment.
the (+) and (-) indications in the battery compartment.
3
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd
any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids,
and do not place in an area with high humidity.
and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
•
•
•
6
Remote control sensor
30
°
30
°
Click on the first or last page to see other LC-32DH500E (serv.man23) service manuals if exist.