Sharp LC-32DH500E (serv.man23) User Manual / Operation Manual ▷ View online
Connecting external devices
NOTE
In cases when the decoder needs to receive a signal from
the TV, make sure to select the appropriate input terminal
to which the decoder is connected in “Input Source” (Page
10).
the TV, make sure to select the appropriate input terminal
to which the decoder is connected in “Input Source” (Page
10).
•
SCART connection
Example of connectable devices
● VCR ● Decoder (only SCART 1)
● DVD player/recorder
HDMI (DVI) Connection
ø 3,5 mm stereo mini jack cable
HDMI 1 or 2
HDMI-certified cable
DVI/HDMI Cable
PC connection through HDMI (DVI)
LC-37DH77E_ES.indd 16
2008/12/16 13:50:06
SCART 1
(AV / RGB)
Speaker/amplifier connector
Connect an amplifier with external speakers as shown
below.
below.
15
SCART cable
Decoder
DIGITAL AUDIO IN
SPDIF
DIGITAL
AUDIO
OUTPUT
SPDIF
Audio
cable
Amplifier with
digital audio input
●
●
After connection
● If after connecting a PC to the TV through a
HDMI cable, the audio does not run, connect a mini
stereo connector of ø
HDMI cable, the audio does not run, connect a mini
stereo connector of ø
3.5mm between TV and PC
as indicated in the previous drawing.
● When a PC is connected to the TV with a DVI
cable, it will be necessary to connect a mini stereo
connector of ø 3.5mm of the TV to PC as indicated
in the previous drawing
cable, it will be necessary to connect a mini stereo
connector of ø 3.5mm of the TV to PC as indicated
in the previous drawing
0#
0#
LC-37DH77E_ES.indd 35
2008/12/16 13:50:34
AUDIO IN
HDMI (DVI)
●
●
After connecting
Digital audio output setting
After connecting an amplifier with digital audio
input and external speakers as shown, you should
set an audio output format compatible with
the programme you are watching or the device
connected.
After connecting an amplifier with digital audio
input and external speakers as shown, you should
set an audio output format compatible with
the programme you are watching or the device
connected.
Go to “MENU” > “SOUND” > “SPDIF Mode”
> select “PCM” or “Dolby Digital”.
> select “PCM” or “Dolby Digital”.
NOTE
When you set this to “Dolby Digital”, and you receive
the Dolby Digital or Dolby Digital Plus audio formats,
Dolby Digital audio is output. Otherwise, PCM audio is
output.
When you set this to “PCM”, PCM audio is output no
matter what audio formats you receive.
the Dolby Digital or Dolby Digital Plus audio formats,
Dolby Digital audio is output. Otherwise, PCM audio is
output.
When you set this to “PCM”, PCM audio is output no
matter what audio formats you receive.
•
Example of connectable devices
●
Connecting an amplifier with digital audio
input
Connecting external devices
Inserting a CA Card
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV (Page 8).
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV (Page 8).
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Inserting the CA Card into the CI Module
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
Carefully insert the CI
Module in the CI slot
with the contact side
forward. The logo on
the CI Module must be
facing outward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
Module in the CI slot
with the contact side
forward. The logo on
the CI Module must be
facing outward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
1
2
Checking CI Module information
NOTE
Make sure that the CI Module is properly inserted.
This menu is only available for digital stations.
This menu is only available for digital stations.
Press MENU and the “PICTURE” menu is
shown.
shown.
Press
c/d to select “CHANNEL” menu.
The content of this menu depends on the provider of
the CI Module.
the CI Module.
Press
a/b to select “CI information”, and then
press OK.
•
•
•
1
2
•
3
16
●
●
Module
General information on CI Module displays.
●
●
Menu
Adjustment parameters of each CA Card displays.
●
●
Enquiry
You can input numerical values such as passwords
here.
here.
NOTE
The content of each screen depends on the provider of
the CI Module.
the CI Module.
NOTE
“MENU” options differ in the selected input modes, but the operating procedures are the same.
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
the actual screens.
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
the actual screens.
Items with 4 in darker grey cannot be selected for various reasons.
•
•
•
•
Menu operation
1
3
2
What is the MENU?
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.
The “MENU” enables various settings and adjustments.
The “MENU” can be operated with the remote control unit and with the TV panel control keys.
The “MENU” enables various settings and adjustments.
The “MENU” can be operated with the remote control unit and with the TV panel control keys.
Common operations
•
•
•
•
•
Operation without a remote control unit
(with the TV panel control keys)
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with the OSD.
operations with the OSD.
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
control unit. The bar will change in accordance with
each menu setting screen.
Picture mode User Eco
Picture mode User
Backlight
50
Contrast
50
Backlight
50
This function is useful when there is no
remote control unit within your reach.
remote control unit within your reach.
Press MENU and the “PICTURE”
screen displays.
screen displays.
Press Pr/s instead of
a/b or
i
k/l instead of c/d to select
the item.
Press b to complete the setting.
1
2
3
NOTE
The “PICTURE” screen will disappear if left unattended for
several seconds.
several seconds.
•
17
Display the
PICTURE Screen
Exit the PICTURE
screen
Select an item
Press MENU and the “PICTURE”
screen displays.
screen displays.
The operation will exit the “PICTURE”
screen if you press END before it is
completed.
screen if you press END before it is
completed.
Press
a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
the desired level, and then press OK.
Press MENU to return to the previous
“PICTURE” page.
“PICTURE” page.
Selecting in the MENU
E
Selecting options
E
PICTURE
Picture mode User
Backlight
50
Contrast
50
Brightness
50
Colour
50
Sharpness
60
END
MENU
OK
PICTURE
Tint 50
Colour temperature Cool
Aspect ratio
Full
Noise
reduction
AUTO
END
MENU
OK
END
MENU
OK
(
Basic adjustment
Audio settings
When the Sound Mode is set to “User”, the sound
can be adjusted according to your preferences. See the
following setting table.
can be adjusted according to your preferences. See the
following setting table.
Adjustments options
Selected
setting
◄ Button
► Button
Treble
Reduce trebles
Increase trebles
Bass
Reduce bass
Increase bass
Balance
Increase audio from
the left speaker
Increase audio from
the right speaker
Auto
Volume
Off
On
Surround
Sound
Off
On
SPDIF
Mode
(PCM) Activates
digital audio output
Dolby Digital
●
Sound Mode
Z
Select your desired setting. The available options
are:
are:
Standard
→Music→Movie→Sports→User
6
●
Auto Volume
Reduces sudden volume changes, for example,
during commercials or when switching from one
channel to another.
during commercials or when switching from one
channel to another.
●
●
Surround Sound
This function allows you to enjoy surround sound.
●
●
SPDIF Mode
Digital audio output
.
Picture settings
When the Picture Mode is set to “User”, the picture
can be adjusted according to your preferences. See
the following setting table.
can be adjusted according to your preferences. See
the following setting table.
Adjustments options
Selected
setting
◄ Button
► Button
Backlight
The screen dims
The screen
brightens
Contrast
Contrast goes down
Contrast goes up
Brightness
Brightness goes
down
Brightness goes up
Colour
Colour intensity goes
down
Colour intensity
goes up
Sharpness
Soften details
Emphasize details
Tint
Skin tones become
purplish
Skin tones become
greenish
Colour
Temperature
Reddish white
Bluish white
Aspect Ratio
Changes between different picture sizes
Noise
Reduction
*
Improves picture quality
(choose among different options)
*
This function may be not available in some types of input
signal.
AV MODE
“AV MODE” gives you several viewing options to
choose from to best match your system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
choose from to best match your system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
1 Press AV MODE.
2 Every time AV MODE is pressed the TV changes
the mode as follows
the mode as follows
:
Standard
→ Soft → Eco → User → Dynamic
6
Picture adjustments
Picture
Sound
Sound adjustments
PICTURE
Picture mode User
Backlight
50
Contrast
50
Brightness
50
Colour
50
Sharpness
60
END
MENU
OK
18
Click on the first or last page to see other LC-32DH500E (serv.man23) service manuals if exist.