Sharp LC-32D44E (serv.man5) Service Manual ▷ View online
LC-32D44E/S/RU-BK/GY
4 – 9
No picture on the display (1)
The picture doesn't appear in all modes.
Is the LVDS signal output from IC3001
(MAIN_MICON)?
LVDS0_P/N(140/141), LVDS1_P/N(137/138),
LVDS2_P/N(134/135), LVDS3_P/N(128/129),
LVDS4_P/N(125/126), LVDS_CP/CN(131/132).
(MAIN_MICON)?
LVDS0_P/N(140/141), LVDS1_P/N(137/138),
LVDS2_P/N(134/135), LVDS3_P/N(128/129),
LVDS4_P/N(125/126), LVDS_CP/CN(131/132).
NO
Check IC3001 and its peripheral control circuits.
YES
Is the LVDS signal input to IC8103 (LCD_CONTROL)?
A0+/-(165/164), A1+/-(167/166), A2+/-(169/168), A3+/-
(189/188), A4+/-(191/190), ACK+/-(187/186)
A0+/-(165/164), A1+/-(167/166), A2+/-(169/168), A3+/-
(189/188), A4+/-(191/190), ACK+/-(187/186)
NO
Check the line between IC3001 and IC8103.
YES
Is the control signal of LCD controller normal?
NO
Check the control signal R/L_LINE, U/D_OUT_LINE,
FRAME_LINE, BANK_SEL_LINE, TEMP1/2/3_LINE,
QS_EN_LINE, etc.
FRAME_LINE, BANK_SEL_LINE, TEMP1/2/3_LINE,
QS_EN_LINE, etc.
YES
Is VCC_3.3V, VCC_2.5V or VCC_1.5V supplied to
IC8103?
IC8103?
NO
Check if IC8402(MULTI_CHANNEL_SYSTEM_POWER_SUPPLY)
and the peripheral power supply circuit are normal.
and the peripheral power supply circuit are normal.
YES
Are the video signals BR/BG/BB (0_P/M-3_P/M), FR/
FG/FB (0_P/M-3_M/P) and the CLK signals (BCLK_P/
M, FCLK_P/M) output from IC8103?
FG/FB (0_P/M-3_M/P) and the CLK signals (BCLK_P/
M, FCLK_P/M) output from IC8103?
NO
Check IC8103 and its peripheral circuits.
YES
Are BR/BG/BB (0_P/M-3_P/M), BCLK (P/M) input to
connector SC8201 and FR/FG/FB (0_P/M-3_P/M),
FCLK (P/M) input to connector SC8202?
connector SC8201 and FR/FG/FB (0_P/M-3_P/M),
FCLK (P/M) input to connector SC8202?
NO
Check the line between IC8103 and SC8201/SC8202.
YES
Are the gradation signals (VH/VL_247, 191, 159, 63,
31, 0) normally sent from IC8201 (GLAY_LEVEL
_GENERATION) to SC8201/SC8202?
31, 0) normally sent from IC8201 (GLAY_LEVEL
_GENERATION) to SC8201/SC8202?
NO
Check IC8201 and that the communication between its peripheral
circuits and IC8103 is normal. (Each line of DAC_CLK/DATA/
LATCH)
circuits and IC8103 is normal. (Each line of DAC_CLK/DATA/
LATCH)
YES
Check the connectors SC8201/SC8202 and LCD panel.
No picture on the display (2)
Does not the picture come out when VHF/UHF is received?
Is the video signal(VIN1) output from pin (6) of TUNER
(TU201)?
(TU201)?
NO
Check whether I2C is normally accessed between named TU201
and IC3001(MAIN_MICON).
and IC3001(MAIN_MICON).
YES
Is the video signal(VIN1) sent to pins (191) of IC3001
(MAIN_MICON)?
(MAIN_MICON)?
NO
Check the line between TU201 and IC3001.
YES
Refer to “The picture doesn't appear in all modes.”
LC-32D44E/S/RU-BK/GY
4 – 10
No picture on the display (3)
Does not the picture come out when DTV is received?
Is the voltage of regulation for a TUNER circuit and the
power supply terminal of IC207 (COFDM) supplied?
(Refer to the circuit diagram)
power supply terminal of IC207 (COFDM) supplied?
(Refer to the circuit diagram)
NO
Each power supply circuit is checked.
YES
Is IF signal output from pin (16),(17) of TUNER(TU201)
to pin(10),(11) of IC207(COFDM)?
to pin(10),(11) of IC207(COFDM)?
NO
Check the tuner, IC207 and their peripheral circuits.
Replace as required.
Replace as required.
YES
Similarly, is communication control carried out between
pin (8),(9) of TU201, and pin (20),(21)of IC207?
pin (8),(9) of TU201, and pin (20),(21)of IC207?
NO
YES
Does X201(27MHz) oscillate?
NO
Check X201 and its peripheral circuits.
YES
Is the MPEG data (FESCL, FESDA, FEVALID, FES-
TROUT) output from IC207 to IC4001?
TROUT) output from IC207 to IC4001?
NO
Check if the line between IC207 and IC4001 and the control signals
FERROR_LINE and FERESET_LEINE are normal. (IC4402, etc.)
FERROR_LINE and FERESET_LEINE are normal. (IC4402, etc.)
YES
Are the video signals (DTV_R/G/B, DTV_CVBS) output
from PIN(15,16,17), PIN(18) of IC4001?
from PIN(15,16,17), PIN(18) of IC4001?
NO
Check if IC4001, IC4201(SDRAM), IC4251(FLASH_MEMORY) and
IC4202(B+2.5V_REG) are normal.
IC4202(B+2.5V_REG) are normal.
YES
Are the video signals (DTV_R/G/B, DTV_CVBS) input
to PIN(181,180,179), PIN(184) of IC3001
(MAIN_MICON)?
to PIN(181,180,179), PIN(184) of IC3001
(MAIN_MICON)?
NO
Check the line between IC4001 and IC3001.
(IC1401, IC1001, Q1031, etc.)
(IC1401, IC1001, Q1031, etc.)
YES
Refer to “The picture doesn't appear in all modes.”
LC-32D44E/S/RU-BK/GY
4 – 11
[External input EXT1,EXT2] No picture on the display (4)
Does not the picture of the CVBS signal input to EXT1 go out?
Does not the picture of the CVBS signal input to EXT2 go out?
Does not the picture of the CVBS signal input to EXT2 go out?
<EXT1>
Is CVBS signal sent to pin (20) of SCART1 (SC1102)?
Is CVBS signal sent to pin (20) of SCART1 (SC1102)?
NO
Check the setting of an external input device that connects of SC1102.
<EXT2>
NO
Check the setting of an external input device that connects of SC1101.
Is CVBS signal sent to pin (20) of SCART2 (SC1101)?
YES
<EXT1>
Is CVBS signal sent to pin (6) of IC1502(SW.)?
Is CVBS signal sent to pin (6) of IC1502(SW.)?
NO
Check the line between SC1102 and IC1502
<EXT2>
Is CVBS signal sent to pin (4) of IC1502(SW.)?
Is CVBS signal sent to pin (4) of IC1502(SW.)?
NO
Check the line between SC1101 and IC1502.
YES
Is CVBS signal output to pin(190) of
IC3001(MAIN_MICON) from pin(2) of IC1502?
IC3001(MAIN_MICON) from pin(2) of IC1502?
NO
Check the line between IC1502 and IC3001.
(SCART12_LINE, etc.)
(SCART12_LINE, etc.)
YES
Refer to “The picture doesn't appear in all modes.”
[External input EXT1,EXT2] No picture on the display (5)
Does not the picture of the R/G/B video signal input to EXT1 go out?
Does not the picture of the R/G/B video signal input to EXT2 go out?
Does not the picture of the R/G/B video signal input to EXT2 go out?
<EXT1>
Is RGB1 signal sent to pins (15)/R1, (11)/G1 and (7)/B1
of SCART1(SC1102)?
Is RGB1 signal sent to pins (15)/R1, (11)/G1 and (7)/B1
of SCART1(SC1102)?
NO
Check the setting of an external input device that connects of SC1102.
<EXT2>
Is RGB2 signal sent to pins (15)/R2, (11)/G2 and (7)/B2
of SCART2(SC1101)?
Is RGB2 signal sent to pins (15)/R2, (11)/G2 and (7)/B2
of SCART2(SC1101)?
NO
Check the setting of an external input device that connects of SC1101.
YES
<EXT1>
Is RGB1 signal sent to pins (187)/R1, (175)/G1 and
(182)/B1 of IC3001(MAIN_MICON)?
Is RGB1 signal sent to pins (187)/R1, (175)/G1 and
(182)/B1 of IC3001(MAIN_MICON)?
NO
Check the line between SC1102 and IC3001.
<EXT2>
Is RGB2 signal sent to pins (178)/R2, (177)/G2 and
(176)/B2 of IC3001(MAIN_MICON)?
Is RGB2 signal sent to pins (178)/R2, (177)/G2 and
(176)/B2 of IC3001(MAIN_MICON)?
NO
Check the line between SC1101 and IC3001.
YES
Refer to “The picture doesn’t appear in all modes.”
LC-32D44E/S/RU-BK/GY
4 – 12
[External input EXT1,EXT2] No picture on the display (6)
Does not the picture of the Y/C video signal input to EXT1 go out?
Does not the picture of the Y/C video signal input to EXT2 go out?
Does not the picture of the Y/C video signal input to EXT2 go out?
<EXT1>
Is Y/C video signal sent to pins (20)/Y and (15)/C of
SCART1 (SC1102)?
Is Y/C video signal sent to pins (20)/Y and (15)/C of
SCART1 (SC1102)?
NO
Check the setting of an external input device that connects of SC1102.
<EXT2>
Is Y/C video signal sent to pins (20)/Y and (15)/C of
SCART2 (SC1101)?
Is Y/C video signal sent to pins (20)/Y and (15)/C of
SCART2 (SC1101)?
NO
Check the setting of an external input device that connects of SC1101.
YES
<EXT1>
Is Y/C signal sent to pins (190)/Y, (187)/C of
IC3001(MAIN_MICON)?
Is Y/C signal sent to pins (190)/Y, (187)/C of
IC3001(MAIN_MICON)?
NO
Check the line between SC1102 and IC3001.
.(IC502, SCART12_LINE, etc.)
.(IC502, SCART12_LINE, etc.)
<EXT2>
Is Y/C signal sent to pins (190)/Y, (178)/C of
IC3001(MAIN_MICON)?
Is Y/C signal sent to pins (190)/Y, (178)/C of
IC3001(MAIN_MICON)?
NO
Check the line between SC1101 and IC3001
.(IC502, SCART12_LINE, etc.)
.(IC502, SCART12_LINE, etc.)
YES
Refer to “The picture doesn’t appear in all modes.”
<When EXT3 is used for external input> No picture on the display (7)
Does not the picture of the composite video signal input to EXT3 go out?
Is CVBS signal output from pin(6) in input terminal
J1002 to pin(10) of connector SC1001?
J1002 to pin(10) of connector SC1001?
NO
Check the line between J1002 and SC1001.
YES
Is the CVBS signal input from pin(10) of connector
P1001 to pin(1) of IC1001(VIDEO SELECTOR)?
P1001 to pin(1) of IC1001(VIDEO SELECTOR)?
NO
Check the line between P1001 and IC1001.
(Connector SC1001/P1001, etc.)
(Connector SC1001/P1001, etc.)
YES
Is CVBS signal output to pin(184) of
IC3001(MAIN_MICON) from pin(7) of IC1001?
IC3001(MAIN_MICON) from pin(7) of IC1001?
NO
Check the line between IC1001 and IC3001.
(SV1JSW_LINE, EXT_DTV_LINE, etc.)
(SV1JSW_LINE, EXT_DTV_LINE, etc.)
YES
Refer to (The picture doesn't appear in all modes.)
Click on the first or last page to see other LC-32D44E (serv.man5) service manuals if exist.