DOWNLOAD Sharp LC-30HV4E (serv.man8) Service Manual ↓ Size: 395.11 KB | Pages: 14 in PDF or view online for FREE

(5) N358 signal adjustment

1

Setup

1. Set colour system to N358.
2. Select N358 source.

100% SMPTE colour bar or similar colour bar
signal including 100% white.

2

MAIN N358 Y
CONTRAST
adjustment

1. Adjust pin (1) of P801 to 0.70 ±0.025 Vp-p.

3

MAIN N358 COLOR
GAIN adjustment

1. Adjust pin (3) of P801 to

0.70 ±0.025 Vp-p.

4

MAIN CR GAIN N358
adjustment

1. Adjust pin (5) of P801 to

0.70 ±0.025 Vp-p.

5

MAIN N358 TINT
adjustment

1. Adjust TB1274_MAIN output (TP802) so that

waveform becomes as illustrated below:

0.70V

0.70V

Smoothed

(6) Component 15k Hz signal adjustment

1

Setup

1. Select component 15k Hz.
2. Select component source.

100% colour bar signal including 100% white, like
split field colour bar

2

MAIN COMP 15k Y
Level adjustment

Adjust pin (1) of P801 to 0.7 0±0.025 Vp-p.

3

MAIN COMP 15k
COLOR GAIN
adjustment

Adjust pin (3) of P801 to
0.70 ±0.025 Vp-p.

4

MAIN CR GAIN COMP
15k adjustment

Adjust pin (5) of P801 to
0.70 ±0.025 Vp-p.

0.70V

0.70V

(7) Component HDTV signal adjustment

2.  Factory settings

(1) Factory Setting

1

Setup

1. Input HDTV (1080i) component signal.
2. Select component source.

100% colour bar signal including 100% white, like
split field colour bar

2

MAIN COMP HDTV
CONTRAST
adjustment

Turn off the PEAK ACL control.
Adjust the TP815 to have 0.90 ±0.25 Vp-p from the
pedestal level.

1

INDUSTRY INT

* Then turn off the AC power supply of the AVC system. (Be careful not to use the power switches of the remote control unit
and AVC system.)

In-process adjustment items

Do not change items, the adjustment procedure of which is not described in this manual. Inadvertent changes of
such items may result in unexpected or unrecoverable errors.

Page 1

Maker Select

Ë

+BAdj3.3V

Ë

+BAdj1.8V(Enter: Auto)

KEY WRITE

Ë

DATA COPY

INDUSTRY INIT
CENTER Version
OSD Version
CVIC Version
TTXP Version
MONITOR Version
STANDBY TYPE
HOTEL MODE

Page 2

Ë

PAL Y  CONTRAST

Ë

PAL COLOR GAIN

Ë

MAIN CR GAIN PAL

Ë

MAIN CONTRAST 15K

Center Acutime

RESET

Monitor Acutime

RESET

Page 3

Ë

SUB PAL Adjust

Ë

SUB PAL Y

Ë

SUB PAL COLOR GAIN

Ë

TUNER DAC ADJ

Page 4

Ë

SECAM Adjust

Ë

SECAM Y  CONTRAST

Ë

SECAM COLOR GAIN

Ë

MAIN CR GAIN SECAM

Page 5

Ë

N358 Adjust

Ë

N358 Y  CONTRAST

Ë

N358 COLOR GAIN

Ë

MAIN CR GAIN N358

Ë

N358 TINT

Ë

REFERENCE Adjust

Page 6

Ë

COMP15K Adjust

Ë

COMP15K Y  CONTRAST

Ë

COMP15K COLOR GAIN

Ë

MAIN CR GAIN COMP15K

Ë

COMP HDTV Adjust

Ë

COMP HDTV CONTRAST

Ë

COMP HDTV SUB BRIGHT

Ë

PEAK ACL SW

Page 7

Ë

PAL White Balance

PAL R CUTOFF
PAL R DRIVE
PAL G CUTOFF
PAL G DRIVE
PAL B CUTOFF
PAL B DRIVE

Page 8

Ë

N358 White Balance

N358 R CUTOFF
N358 R DRIVE
N358 G CUTOFF
N358 G DRIVE
N358 B CUTOFF
N358 B DRIVE

Page 9

Ë

COMP15K White Balance

COMP15K R CUTOFF
COMP15K R DRIVE
COMP15K G CUTOFF
COMP15K G DRIVE
COMP15K B CUTOFF
COMP15K B DRIVE

Page 10

Ë

COMP33K White Balance

COMPHDTV R CUTOFF
COMPHDTV R DRIVE
COMPHDTV G CUTOFF
COMPHDTV G DRIVE
COMPHDTV B CUTOFF
COMPHDTV B DRIVE

Page 11

IPMODE INTERLACE
MDSW INTERLACE
PTGSW INTERLACE
IPMODE PROGRESSIVE
MDSW PROGRESSIVE
PTGSW PROGRESSIVE
IPMODE FMODEON
MDSW FMODEON
PTGSW FMODEON
IPMODE SUB
MDSW SUB
PTGSW SUB
IPMODE FMODEON PAL
MDSW FMODEON PAL
PTGSW FMODEON PAL

Page 12

IPMODE PROGRESSIVE2
MDSW PROGRESSIVE2
PTGSW PROGRESSIVE2
IPMODE FMODEON2
MDSW FMODEON2
PTGSW FMODEON2
ILG LV
MD LV
VE LV
IP MODE SEL

Page 13

DEBUG PRINT SW
PIC ADJ MAKER SELECT
PIC ADJ KOUTEI SELECT
EEPROM SAVE
EEPROM RECOVER
DEBUG_SELECT_SW
DEBUG COMPANY SELECT
DEBUG PANELTYPE SELECT
CENTER PROG UPDATE

Programs installed in the product are mainly divided into the following two categories:

∫

 Main programs (for AVC system)

∫

 Monitoring program (for display)

[Tools required]

∫

 PC

A Windows 95/98/me/2000/XP PC that has a COM port (RS-232C).
A USB-R232C converter will be acceptable provided that it is appropriately set and has PC compatibility.

∫

 RS-232C cross cable

Interlink cable is also acceptable.

[Preparations]
Rewriting a program needs the product to enter the in-process adjustment mode.

1) The rewriting software is supplied in the form of an exe file named e.g., "MAIN_2002_10_10A.exe" (provisional).

Create a directory on a HD and copy the software into the directory.

2) Double-click the file. The file will be self-extracted. Check the extracted file against the documentation

accompanying with the software.

3) Connect the AVC System and the display unit with each other and make them ready for operation (make sure

the power LEDs of the AVC System and display unit turn red).

4) Use an RS-232C cable to connect the PC to the AVC System.
5) Exercise great care to hide the procedure in entering the in-process adjustment mode from the customer.

Press the MAIN POWER button while holding down the volume DOWN key and the INPUT key on the display
unit simultaneously.
If blue characters appear on the display, the system has entered the in-process adjustment mode successfully.
If not (the normal activation screen opens), retry.

[Rewriting the main program]

1) In the in-process adjustment mode, press the Channel Up key on the remote controller. You will move to page

13 ("13/13" will appear on the upper left corner of the screen).

2) Make sure CENTER PROG UPDATE is highlighted.
3) Use the VOLUME -/+ keys to change OFF to ON.
4) Press the ENTER key on the remote controller. Characters on the screen will disappear and the screen blacks

out.

5) Double-click the batch file specified in the document accompanying with the software.
6) A black window (MS-DOS window) will open and rewriting starts automatically.

Rewiring of the main program is now complete. Unplug the AC cable from the AVC System and turn off the
system and then on again.

7) Enter the in-process adjustment mode and make sure the version information on the CENTER Version, OSD

Version and CVIC Version lines on page 1 has been updated.

CAUTON: Exercise great care to hide the procedure in entering the in-process adjustment mode from the
customer. Inadvertent setting changes in this mode may cause a fatal error resulting in a program being
unrecoverable.