DOWNLOAD Sharp LC-30HV4E (serv.man44) Service Manual ↓ Size: 3.67 MB | Pages: 74 in PDF or view online for FREE

+

+

_

_

Open the battery cover.

Insert two supplied LR6 (“AA” size)
Alkaline batteries.

• Place batteries with their terminals

corresponding to the (e) and (f)
indications in the battery compartment.

Close the battery cover.

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not use manganese batteries. When you replace the batteries, use alkaline ones.
• Place the batteries with their terminals corresponding to the (e) and (f) indications.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause

chemical leakage in old batteries.

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you

find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

Before using the System for the first time, insert two LR6 (“AA” size) Alkaline batteries (supplied).  When the
batteries become depleted and the remote control fails to operate, replace the batteries with new LR6 (“AA”
size) Alkaline batteries.

Use the remote control unit by pointing it towards the remote sensor window.
Objects between the remote control unit and sensor window may prevent proper
operation.

• Do not expose the remote control unit to shock.

In addition, do not expose the remote control unit to liquids, and do not place
in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight.

The heat may cause deformation of the unit.

• The remote control unit may not work properly if the remote sensor window of

the Display is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or Display, or operate the remote control unit closer to
the remote sensor window.

OPC indicator*

STANDBY/ON indicator

MAIN POWER
button

OPC sensor

Remote control sensor
indicator

STANDBY/ON button
(B)

INPUT

button

VOLUME buttons

( il/k )

CHANNEL buttons

(CHs/r)

Remote control sensor

*OPC: Optical Picture Control

(See Pages 36 and 38.)

INPUT 1 terminal
(SCART)

INPUT 3 terminals (Y, P

B

(C

B

)

, 

 P

R

(C

R

))

INPUT 2 terminal (SCART)

AV OUTPUT terminal
(S-VIDEO)

DISPLAY OUTPUT1 terminal

AC INPUT terminal

CLEAR*

POWER button

RS-232C terminal

INPUT 4 terminal (S-VIDEO)

PC INPUT terminal (AUDIO)

INPUT 4 terminals (AUDIO)

INPUT 3 terminal (SCART)

AV OUTPUT terminal
(VIDEO)

AV OUTPUT terminals
(AUDIO)

PC INPUT terminal
(ANALOG RGB)

* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this

case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.

• AV MODE resets to STANDARD.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• SRS resets to OFF.
• Image position is initialised.

• Pressing CLEAR will not work if the System is in standby mode (indicator lights red).
• Pressing CLEAR will not delete channel preset or password. See page 60 for clearing the password when you know it.

See page 74 for initialising to the factory preset values when you forget your password.

ANTENNA INPUT terminal

STANDBY/ON indicator

DISPLAY OUTPUT2
terminal

INPUT 4 terminal (VIDEO)

(How to open the door)

Headphone

DC OUTPUT terminal
(Terminal for expanded
functionality in the near
future.)

(When connecting headphones,
the sound from the speakers is
muted.)

B (STANDBY/ON)
To switch the power on and off. (See page 14.)

du (FREEZE/HOLD for TELETEXT)
TV/External input mode: Change the still image mode.
TELETEXT mode: Freeze a multi-page on screen while other
pages are automatically updated. Press d again to return to the
normal image. (See pages 62 and 63.)

c (DUAL screen)
Set the dual picture mode. Press c again to return to normal view.
(See page 61.)

fv (WIDE MODE/ T/B/F)
TV/External input mode: Change the wide image mode. (See pages
52 and 53.)
TELETEXT mode: Set the area of magnification. (full/upper half/
lower half) (See page 63.)

AV MODE
Select a video setting: AV MODE (STANDARD, DYNAMIC, MOVIE,
GAME, USER), PC MODE (STANDARD, USER) (See page 51.)

SOUND
Select the sound multiplex mode. (See page 20.)

h (SRS and FOCUS)*
Select SRS and FOCUS sound system. (See page 19.)

A (Flashback)
Press to return to the previous channel in normal viewing mode.
Press to return to the previous page in TELETEXT mode. (See page
17.)

il/ik (VOLUME)
Set the volume. (See page 18.)

k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 63.)

j (SUBPAGE for TELETEXT)
TELETEXT mode: Change the picture mode for sub-page selecting.
(See page 64.)

MENU
Display the MENU screen.

C (CHANNEL INFORMATION)
Display the channel information and time. (See page 65 for details
on the time display.)

b (INPUT SOURCE)
Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4,
PC) (See pages 40, 41, 43-45 and 50.)

SLEEP
Set the Sleep timer. (See page 58.)

e (MUTE)
Mute the sound. (See page 18.)

0 – 9
TV/External input mode: Set the channel.
TELETEXT mode: Set the page.

o (Digit for channel select)
Change the digits of the selected TV channel. (See page 17.)

Colour (RED/GREEN/YELLOW/BLUE)
TELETEXT mode: Select a page. (See page 63.)

CHa/CHb(w/x )
TV/External input mode: Select the channel.
TELETEXT mode: Set the page. (See page 63.)

l (TOP Overview for TELETEXT)
TELETEXT mode: Display an index page for CEEFAX/FLOF
information. TOP Overview for TOP programme. (See page 64.)

m (TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT image, TV/TEXT
image) (See pages 63 and 64.)

RETURN
MENU mode: Return to the previous menu screen.

ENTER
Execute a command.
Return to the initial image position after moving with a/b/c/d.

a/b/c/d (Cursor)
Select a desired item on the setting screen.
Move the picture on the screen.

• When using the remote control unit, point it

at the Display.

 is a trademark of SRS Labs, Inc.

FOCUS technology is incorporated under
license from SRS Labs, Inc.