Sharp LC-26SB25E Service Manual ▷ View online
2008-03-14
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
17
Fig.4
2. Remove the 4 screws. Detach the BASE STAND as Fig.5.
Step 2. Remove the REAR COVER Assy.
1. Remove the 9 screws. Detach the
REAR COVER
as Fig.5.
Fig.5
Step 3. Remove the Main, Power, IR, Key board and the Speakers.
Fig.6
1. Remove the 6 screws and disconnect 6 cables. Detach the Main board as Fig.7 and Fig.8.
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
18
Fig.7
Fig.8
2. Remove the 5 screws and disconnect 2 cables. Detach the Power board as Fig.9.
Fig.9
3. Remove the 1 screw and disconnect 1 cable. Detach the IR board as Fig.10.
2008-03-14
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
19
Fig.10
4. Disconnect 1 cable. Detach the Key board as Fig.11.
Fig.11
5. Remove the 4 screws and disconnect 4 cables. Detach the Speakers as Fig.12 and Fig.13.
Fig.12
Fig.13
Step 4. Remove the Metal Frame.
1.
Remove the 6 screws and disconnect 2 cables. Detach the Metal Frame as Fig.14.
Fig.14
Step 5. Remove the Bezel Assy.
1. Remove the 6 screws. Detach the
Bezel Assy
as Fig.15~Fig.17.
LC-26SB25E/S/RU, LC-32SB25E/S/RU, LC-42SB55E/S/RU
20
Fig.15
Fig.16
Fig.17
2. The below picture is panel as Fig.18.
Fig.18
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
Click on the first or last page to see other LC-26SB25E service manuals if exist.