Sharp LC-26SB25E (serv.man2) User Manual / Operation Manual ▷ View online
Quick guide
Follow the below steps one by one when using the TV for the first time� Some steps may not be necessary depending
on your TV installation and connection�
on your TV installation and connection�
preparation
1
power on and
run the auto
installation
2
Watch tV
3
Connect antenna cable to
the antenna terminal.
the antenna terminal.
75Ω
If necessary, insert CA card
into the CI slot to watch
scrambled broadcasts.
into the CI slot to watch
scrambled broadcasts.
Connect the AC cord to the
TV.
TV.
Turn on the TV power with a.
Run the initial auto
installation.
installation.
4
language setting
TV Installation
Please select your language.
Next
Български
Česky
Dansk
Deutsch
Ελληνικά
Česky
Dansk
Deutsch
Ελληνικά
English
Español
Français
Français
4
Country setting
TV Installation
Please select your country.
Next
Previous
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
Slovenia
Spain
Sweden
Switzerland
Turkey
UK
Ukraine
Congratulations!
now you can watch tV�
Enjoy your television ! If latter on you still want to
change a setting, you can go to the menu.
Finish
Previous
If necessary, adjust the antenna to
attain maximum signal reception.
attain maximum signal reception.
4
Start searching channels
TV Installation
System searching. Please wait...
Digital channels found:
Analogue channels found:
Analogue channels found:
Auto programming may take up to 20 minutes to complete.
Please wait untill you see the Auto Programming.
Next
Previous
0
0
0
initial installation overview
7
AC cord (X1)
Product shape varies in
some countries
Product shape varies in
some countries
Quick guide
After unpacking and plugging in your new LCD TV, please proceed with the following steps to set-up your TV� If you
do not run this set-up function, your LCD TV may not operate properly�
do not run this set-up function, your LCD TV may not operate properly�
Confirm the following before turning on the power
E
E
Is the antenna cable connected?
E
Is the AC cord plugged in?
Press the
1�
< or > buttons to select your
language. And press the Green button to
continue.
continue.
TV Installation
Please select your language.
Next
Български
Česky
Dansk
Deutsch
Ελληνικά
Česky
Dansk
Deutsch
Ελληνικά
English
Español
Français
Français
Press the
2�
< or > buttons to select your
country. And press the Green button to continue
or press the Yellow button to the previous.
or press the Yellow button to the previous.
TV Installation
Please select your country.
Next
Previous
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
Slovenia
Spain
Sweden
Switzerland
Turkey
UK
Ukraine
System searching may take up to 20 minutes to
3�
complete. Please wait until system searching is
completed, and then press the Green button to
next step.
completed, and then press the Green button to
next step.
TV Installation
System searching. Please wait...
Digital channels found:
Analogue channels found:
Analogue channels found:
Auto programming may take up to 20 minutes to complete.
Please wait untill you see the Auto Programming.
Next
Previous
0
0
0
Channel search completed message may show
4�
out when system searching is finished. Press
the Red button to finish system searching, and
then the LCD TV will switch automatically to the
first channel found.
the Red button to finish system searching, and
then the LCD TV will switch automatically to the
first channel found.
Enjoy your television ! If latter on you still want to
change a setting, you can go to the menu.
Finish
Previous
First time installation
8
Watching tV
turning on/off the power
Press a on the TV�
Switch it off by pressing a on the TV�
Switch it off by pressing a on the TV�
B
indicator
Status
Off
Power off
Green
Power on
Red
Standby
note
If you are not going to use this TV for a long period of time, be
•
sure to remove the AC cord from the power outlet�
A small amount of electric power is still consumed even when
A small amount of electric power is still consumed even when
•
a
is turned off�
tV indicator status
E
to standby mode
If the TV set is switched on, you can switch it to standby
by pressing B on the remote control�
by pressing B on the remote control�
E
Switching on from standby
From standby, press B on the remote control�
Selecting external video source
Once the connection is made,
press b to display the INPUT
SOURCE screen, and then
press </> to switch over to the
appropriate external source with
oK�
press b to display the INPUT
SOURCE screen, and then
press </> to switch over to the
appropriate external source with
oK�
Selecting Sound mode
Press Dual button on the remote control�
Select Mono, Stereo, DUAL I and DUAL II for ATV
channel� Select Audio language for DTV channel�
Select Mono, Stereo, DUAL I and DUAL II for ATV
channel� Select Audio language for DTV channel�
Source
YPbPr
TV
Side AV
SCART 1
SCART 2
PC
HDMI 1
HDMI 2
SCART 1
SCART 2
PC
HDMI 1
HDMI 2
No Label
No Label
No Label
No Label
No Label
No Label
No Label
No Label
No Label
No Label
No Label
No Label
No Label
Standby mode
Changing channels
With Pr/ Ps:
Daily operation
Switching on/off
9
Watching tV
EPG is an on-screen guide that displays scheduled
digital TV programs� This guide is not available with
analogue channels� You can navigate, select and view
programs�
There are two types of EPG, ‘Now and Next’ and ‘7 or 8
day’ EPG� ‘Now and Next’ is always available but the ‘7
or 8 day’ EPG is only available in certain countries�
digital TV programs� This guide is not available with
analogue channels� You can navigate, select and view
programs�
There are two types of EPG, ‘Now and Next’ and ‘7 or 8
day’ EPG� ‘Now and Next’ is always available but the ‘7
or 8 day’ EPG is only available in certain countries�
With the EPG menu you can:
View a list of currently broadcast digital programs.
•
View upcoming programs.
•
Switch on epG
note
The first time you use EPG, you may be prompted to perform
•
an update� If so, follow the on-screen instructions�
Press
1�
epG on the remote control, the “Now
and Next” EPG will appear and the detailed
information about the current program is
displayed.
information about the current program is
displayed.
0
Use the colour buttons on the remote control to
2�
activate available actions.
Viewing date: Thu. 03 Jan
Televsion
I
EPG
Current time: Thu. 03 Jan 16:52
1
2
7
10
11
12
13
801
7
10
11
12
13
801
BBC CHO...
BBC i
BBC NE
BBC PAR
BBC Kno
MTK_OAD
BBC i
BBC NE
BBC PAR
BBC Kno
MTK_OAD
BBC ONE
BBC TWO
17:00~17:25 Children’s
Next day
Prev day
Detail
17:00
The Blue Peter Quest CBBC
16:30
The Wild Thornberrys CBBC
Use the colour buttons to view 7 or 8 day EPG.
3�
prev Day
•
(Red): List the previous day’s EPG
next Day
•
(Green): List the next day’s EPG
17:00 ~ 17:25 The Blue Peter Quest CBBC
Televsion
I
EPG
I
Detail
Your chance to travel back onces more to the times
of pirates and buried treasure. Follow Matt and
Meg as the set out to find the Golden Galleon
that will release his granny from Jali. W/S.
Next day
Prev day
Detail
Children’s
Press EPG to exit .
4�
epG (electronic program Guide)
10
Click on the first or last page to see other LC-26SB25E (serv.man2) service manuals if exist.