DOWNLOAD Sharp LC-26P50E Service Manual ↓ Size: 1.69 MB | Pages: 47 in PDF or view online for FREE

29

4.

File Contents
File contents appear in the IAPWriter window.

The file is ready to be overwritten.
Press the space bar to start rewriting.

5.

Rewriting Status
While rewriting, the status appears on the right of the window.
The power LED illuminates while rewriting.

30

6.

Result appears at the end of the process.

When the rewriting has succeeded, the status pane appears green as shown above.
When failed, it appears red.
(If failed, start over the rewriting process. If it still fails, the hardware may be
damaged.)

7.

When rewriting is complete, the Power LED flashes.

8.

When finished, turn off AC power (unplug AC adapter) of the unit and disconnect the
rewriting jig.

9.

The software is updated.
(After rewriting the software, turn on the unit and check the Main Software version on
the initial page of process adjustment.)

31

1.

Unplug the AC power cord of running TV set to force off the power.

2.

While holding down the "VOL (–)" and "INPUT" keys on the set at once, plug in the
AC power cord to turn on the power. The letter K appears on the screen.

3.

Next, hold down the "VOL (–)" and "P (Ù)" keys on the set at once. Multiple lines of
blue characters appearing onscreen indicate that the set is now in the adjustment
process mode. If you fail to enter the adjustment process mode (the display is the
same as normal startup), retry the procedure.

4.

To exit the adjustment process mode after the adjustment is done, unplug the AC
power cord to force off the power. (When the power is turned off with the remote
controller, once unplug the AC power cord and plug it in again. In this case, wait 10
seconds or so before plugging.)

P (UP/DOWN)

P (UP/DOWN)

Moving an item (line) by one (UP/DOWN)

VOL (UP/DOWN)

VOL (UP/DOWN)

Changing a selected item setting (+1/–1)

Cursor (UP/DOWN)

Turing a page (PREVIOUS/NEXT)

Cursor (LEFT/RIGHT)

Changing a selected line setting (+10/–10)

INPUT SOURCE
on remote controller

INPUT button

Input source switching(toggle switching)
(TV -> EXT1 -> EXT2 -> EXT3 -> EXT4)

OK

Executing a function

*Input mode is switched automatically when relevant adjustment is started so far as the
necessary input signal is available.

32

Adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu
header.