DOWNLOAD Sharp LC-26LE430E Service Manual ↓ Size: 15.96 MB | Pages: 127 in PDF or view online for FREE

LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E 

8  

 

Use the remote control unit by pointing it towards the remote control sensor. Objects  

between the remote control unit and sensor may prevent proper operation. 

 
 
 
 
 
 
 
 

Press MENU and the menu screen displays. 
 

Select an item by the remote control 

1. Press 

<>≥ to select the desired menu. 

2. Press 

≤ ≥  to select / adjust the item to the 

desired level. The setting on screen is applied 
immediately. 

3. 

Press EXIT to return to the previous layer . 

 
 
 
 
 
 
 

 

The operation will exit the menu screen if you press EXIT before it is complete. 
 

         2008-03-14 

LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E 

 9 

Appendix 

problem 

possible Solution 

No picture 

1. Connect power cord correctly. 
2. Turn on power. 
3. Connect signal cable correctly. 
4. Press any button on the LCD TV. 

Abnormal colours 

Connect signal cable correctly. 

Twisted picture 

1. Connect signal cable correctly. 
2. Please use compatible signal. 

Picture too dark 

Adjust brightness and contrast. 

Audio only, no images 

1. Please check if input signal is connected correctly. 
2. TV-RF signal must not be lower than 50dB. 

Picture only, no audio 

1. Connect signal cable correctly. 
2. Adjust volume to proper level. 
3. Connect audio signal cable correctly. 
4. TV-RF signal must not be lower than 50dB. 

Cannot use remote control 

1. Please change battery. 
2. Turn off power for 10 seconds; and then restart power. 

Cannot receive sufficient channels 
through antenna 

Please use the Channel Scan function to increase the number of channels not included in memory. 

No colour 

Please adjust the colour setup. 

Blinking picture accompanied by ghost 
image 

1. Check the connection of antenna/signal cable. 
2. Check if channel is in play mode. 
3. Press signal source and change input mode. 

Broken lines or segments 

Adjust antenna. 
Keep the TV away from noise sources, such as automobiles, neon lights, and hair dryers. 

Certain TV channels are blocked(Hope to 
acquire some channels) 

Please use the Update Scan method to add the channels not included in memory. 

Overlapping images or ghost images 

Please use multi-directional outdoor antenna.(If your TV is subject to the influence of nearby 
mountains or buildings). 

Cannot use a function 

If the item you choose turns gray, that item cannot be selected. 

Cannot receive programmes 

Please use the Update Scan method to add the channels not included in memory. 

 

Cautions regarding use in high and low temperature environments 
•  When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This 

is not a malfunction, and the unit will recover when the temperature returns to normal. 

•  Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a 

heater, as this may cause the cabinet to deform and the LCD panel to malfunction. 

•  Storage temperature: +5°C to +35°C. 

 

Information on the software license for this product  

 

Software composition 

The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. 

 

Software developed by SHARP and open source software 

The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are 
owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely 
distributed software and software components whose copyrights are held by third parties. These include software components covered by a GNU 
General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license Agreement. 

 

Acknowledgements 

The following open source software components are included in this product:  
•linuxkernel•modutils•glibc•zlib•libpng 

 

LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E 

10  

 

 
Dimension 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

         2008-03-14 

LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E 

 11 

CHAPTER 2. 

 

 

Notes: Please put your machine on soft material to avoid to scrape panel when you disassemble it.

 

Front view  

 

Fig.1 

Back view

 

 

Fig.2 

Step 1. Remove the Base Assy and Base neck. 

1. Remove the Base Assy as Fig.3. 

Remove the 3 screws as Fig.3 and pull out the base as Fig.4

 

 

 

Fig.3