Sharp LC-24LS240EXK Service Manual ▷ View online
English - 36 -
Appendix C: Supported DVI Resolutions
When connecting devices to your TV’s connectors by using DVI to HDMI cables (not supplied), you can refer
to the following resolution information.
to the following resolution information.
Index
Resolution
Frequency
1
640x400
70Hz
2
640x480
60Hz-66Hz-72Hz
-75Hz
3
800x600
56Hz-60Hz-70Hz-
72Hz -75Hz
4
832x624
75 Hz
5
1024x768
60Hz-66Hz-70Hz-
72Hz -75Hz
6
1152x864
60Hz-70Hz-75Hz
7
1152x870
75Hz
8
1280x768
60 HzA
9
1280x768
60 HzB
10
1280x768
75Hz
11
1280x960
60Hz-75Hz
12
1280x1024
60Hz-75Hz
13
1360x768
60 Hz
14
1400x1050
60 HzA
15
1400x1050
60 HzB
16
1400x1050
75Hz
17
1400x900
65Hz-75Hz
18
1600x1200
60 Hz
19
1680x1050
60 Hz
20
1920x1080
60 HzA
21
1920x1080
60 HzB
22
480i-480p
60Hz
23
576i-576p
50Hz
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 36
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 36
17.08.2012 12:14:38
17.08.2012 12:14:38
English - 37 -
Appendix D: Supported File Formats for USB Mode
Media
File
Extension
Format
Remarks
(Maximum resolution/Bit rate etc.)
Video
Audio
Movie
.mpg, .mpeg
MPEG1, 2
MPEG Layer 1/2/3
max 1920x1080 @ 30P 20Mbit/sec
.dat
MPEG1, 2
MPEG2
.vob
MPEG2
.mkv
H.264, MPEG1,2,4
EAC3 / AC3
.mp4
MPEG4, Xvid 1.00,
Xvid 1.01, Xvid 1.02,
Xvid 1.03, Xvid 1.10-
Xvid 1.03, Xvid 1.10-
beta1/2 H.264
PCM/MP3
.avi
MPEG2, MPEG4
PCM/MP3
max 1920x1080 @ 30P 20Mbit/sec
Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03,
Xvid 1.02, Xvid 1.03,
Xvid 1.10-beta1/2 H.264
PCM
Music
.mp3
-
MPEG 1 Layer 1 / 2
(MP3)
32kbps ~ 320kbps(Bit rate)
32kHz ~ 48kHz(Sampling rate)
Photo
.jpg .jpeg
Baseline JPEG
max WxH = 15360x8640 4147200bytes
Progressive JPEG
max WxH = 1024x768 6291456bytes
.bmp
-
max WxH = 9600x6400 3840000bytes
Subtitle
.sub
-
-
.srt
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 37
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 37
17.08.2012 12:14:38
17.08.2012 12:14:38
English - 38 -
Appendix E: Software Upgrade
• Your TV is capable of fi nding and updating new software upgrades over broadcast channels.
• For broadcast channels search, TV looks the available channels stored in your settings. So before software
upgrade search, it is advised to auto search and update all available channels.
• For broadcast channels search, TV looks the available channels stored in your settings. So before software
upgrade search, it is advised to auto search and update all available channels.
1) Software upgrade search via user interface
• It is possible manually to check if there is a new software upgrade for your TV set.
• Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings
menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.
• In Upgrade Options menu select Scan for upgrade and press OK button.
• If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download
progress. When download completes with success a message is displayed for reboot to activate new software.
Press OK to continue with the reboot operation.
• Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings
menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.
• In Upgrade Options menu select Scan for upgrade and press OK button.
• If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download
progress. When download completes with success a message is displayed for reboot to activate new software.
Press OK to continue with the reboot operation.
2) 3.AM search and upgrade mode
• If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast
channels for new software upgrade. If new software is found and downloaded successfully, with next power
up TV opens with new software version.
Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is
fi nished successfully. During reboot TV makes fi nal initializations. In reboot sequence panel power is closed and
front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.
• If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with
new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few
times more. If your set still can not operate, please call the service personnel to fi x the problem for you.
Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause
your TV not to re-open again and can only be fi xed by service personnel.
channels for new software upgrade. If new software is found and downloaded successfully, with next power
up TV opens with new software version.
Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is
fi nished successfully. During reboot TV makes fi nal initializations. In reboot sequence panel power is closed and
front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.
• If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with
new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few
times more. If your set still can not operate, please call the service personnel to fi x the problem for you.
Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause
your TV not to re-open again and can only be fi xed by service personnel.
Products
Battery
Information for Users on Disposal of old Equipment and
Batteries
Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates that this
battery contains lead.
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 38
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 38
17.08.2012 12:14:38
17.08.2012 12:14:38
English - 39 -
Specifi cations
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
NUMBER OF PRESET CHANNELS
1000
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWER (W
NUMBER OF PRESET CHANNELS
1000
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWER (W
RMS.
) (10% THD)
2 x 2,5
POWER CONSUMPTION (W)
50 W (max)
< 0,5 W (Standby)
PANEL
16:9 display, 24” (60 cm) Screen Size
DIMENSIONS (mm)
DxLxH (With stand): 149 x 576,2 x 404,8
Weight (Kg): 5,70
DxLxH (Without stand): 35,5 x 576,2 x 368
Weight (Kg): 5,05
POWER CONSUMPTION (W)
50 W (max)
< 0,5 W (Standby)
PANEL
16:9 display, 24” (60 cm) Screen Size
DIMENSIONS (mm)
DxLxH (With stand): 149 x 576,2 x 404,8
Weight (Kg): 5,70
DxLxH (Without stand): 35,5 x 576,2 x 368
Weight (Kg): 5,05
Digital
Reception
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profi le 1
for UK
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profi le
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Transmission standard: DVB-T. MPEG-2, MPEG-4
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
Digital Reception (DVB-C)
Transmission Standards:
DVB-C, MPEG2, DVB-C, MPEG4
i. DEMODULATION
-Symbolrate: 4.0 Msymbols/s to 7.2 Msymbols/s
- Modulation: 16-QAM , 32-QAM ,64-QAM, 128-QAM
and 256-QAM
ii. VIDEO
- All MPEG2 MP@ML formats with up-conversion and
fi ltering to CCIR601 format.
-CVBS analogue output
iii. AUDIO
-All MPEG1 Layer 1 and 2 modes
-Sampling frequencies supported are 32, 44.1 & 48
kHz
DVB-C, MPEG2, DVB-C, MPEG4
i. DEMODULATION
-Symbolrate: 4.0 Msymbols/s to 7.2 Msymbols/s
- Modulation: 16-QAM , 32-QAM ,64-QAM, 128-QAM
and 256-QAM
ii. VIDEO
- All MPEG2 MP@ML formats with up-conversion and
fi ltering to CCIR601 format.
-CVBS analogue output
iii. AUDIO
-All MPEG1 Layer 1 and 2 modes
-Sampling frequencies supported are 32, 44.1 & 48
kHz
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 39
00_MB62_[GB]_1910UK_UK IDTV_PVR_BRONZE19_24971LED_ROCKER_10080946_50229224.indd 39
17.08.2012 12:14:38
17.08.2012 12:14:38
Click on the first or last page to see other LC-24LS240EXK service manuals if exist.