Sharp LC-22DS240K Service Manual ▷ View online
53
LC-22DV240
LC-22DS240
LC-22DS240
1.5 Source Settings
1.6 USB Operations
USB operations option can not be used directly. It can be used for updating panel tool,
hw confi guration etc.
hw confi guration etc.
54
LC-22DV240
LC-22DS240
LC-22DS240
SOFTWARE UPDATE
20. SOFTWARE UPDATE
In MB62 project there is only one software. From following steps software update
procedure can be seen:
procedure can be seen:
1. MB62_en.bin, mboot.bin and usb_auto_update_T4.txt documents should copy directly
inside of a flash memory(not in a folder).
2. Put flash memory to the tv when tv is powered off.
3. Power on the and wait when the tv is opened.
4. If First Time Installition screen comes, it means software update procedure is
3. Power on the and wait when the tv is opened.
4. If First Time Installition screen comes, it means software update procedure is
succesful.
55
LC-22DV240
LC-22DS240
LC-22DS240
TROUBLESHOOTING
21.1. No Backlight Problem
Problem: If TV is working, led is normal and there is no picture and backlight on the panel.
Possible couses: Backlight pin, dimming pin, backlight supply, stby on/off pin
Backlight pin should be high in open position. If it is low, please check Q181 and panel
cables.
cables.
Dimming pin should be high or square wave in open position. If it is low, please check
S16 for Mstar side and panel or power cables, connectors.
S16 for Mstar side and panel or power cables, connectors.
Backlight power supply should be in panel specs. Please check CN705 for MB62, related
connectors for power supply cards.
connectors for power supply cards.
56
LC-22DV240
LC-22DS240
LC-22DS240
STBY_ON/OFF should be low for standby on condition, please check R1677.
21.2. CI Module Problem
Problem: CI is not working when CI module inserted.
Possible couses: Supply, suply control pin, detect pins, mechanical positions of pins
CI supply shoul be 5V when CI module inserted. If it is not 5V please check
CI_POWER_CTRL, this pin should be low.
CI supply shoul be 5V when CI module inserted. If it is not 5V please check
CI_POWER_CTRL, this pin should be low.
Click on the first or last page to see other LC-22DS240K service manuals if exist.