Sharp LC-22DS240K Service Manual ▷ View online
17
LC-22DV240
LC-22DS240
LC-22DS240
0.2 MB60 Placement of Blocks
Main IC
(U5)
Tuner
(TU3)
Nand
Flash
(U162)
SPI
Flash
DDR2
RAM
(U155)
LVDS
Connectors
DVD
Connector
External
Keyboard
Touchboard
Power Connector
Keypad
YPbPr
SAV
HP
USB
HDMI
Connectors
VGA
SCART
Connec
tor
SP
DI
F
Out
Adapter DC
Input
Speaker
Con.
Led
Con
Inv.
Con
CI Connector
18
LC-22DV240
LC-22DS240
LC-22DS240
CIRCUIT DESCRIPTIONS
A horizontal mounted and Digital Half-Nim tuner is used in the product, which covers 3
Bands(From 48MHz to 862MHz for COFDM, from 45.25MHz to 863.25MHz for CCIR CH).
The tuning is available through the digitally controlled I2C bus (PLL). Below you will find
info about the tuner.
Bands(From 48MHz to 862MHz for COFDM, from 45.25MHz to 863.25MHz for CCIR CH).
The tuning is available through the digitally controlled I2C bus (PLL). Below you will find
info about the tuner.
In active antenna option, the following circuit are used. ANT_CTRL pin is controlled by
microcontroller. If ANT_CTRL is low, ANT_PWR will be low. If ANT_CTRL is high,
ANT_PWR will be high.
microcontroller. If ANT_CTRL is low, ANT_PWR will be low. If ANT_CTRL is high,
ANT_PWR will be high.
OVER_CUR_DETECT pin is a monitor for short circuit in antenna. OVER_CUR_DETECT
is low, ANT_CTRL will be low, so ANT_PWR will be low. Finally, short circuit protection is
done by circuits and microcontroller.
is low, ANT_CTRL will be low, so ANT_PWR will be low. Finally, short circuit protection is
done by circuits and microcontroller.
1.1. General description of Sony RE216:
The SUT-RE216 is designed for terrestrial TV (digital & analog) and digital cable
reception. It includes a full band tuner and a channel filtering for digital signals. It provides
a low IF output after channel filtering to drive a channel demodulator. Tuning, band
switching and initialization are made via an I2C bus
interface. The module is built on a low-loss printed
circuit board carrying all the components in a metal
housing frame with top and rear covers. The single
aerial connector is mounted on one frame side and all
other connections are made via pins at the bottom.
reception. It includes a full band tuner and a channel filtering for digital signals. It provides
a low IF output after channel filtering to drive a channel demodulator. Tuning, band
switching and initialization are made via an I2C bus
interface. The module is built on a low-loss printed
circuit board carrying all the components in a metal
housing frame with top and rear covers. The single
aerial connector is mounted on one frame side and all
other connections are made via pins at the bottom.
Features:
9 Full frequency range from 47 to 870 Mhz
9 Digital Platform (DVB-T/T2, DVB-C, ISDB-T & ATSC)
9 Analog platforms (PAL B/G/I/D/K, NTSC M & SECAM L/L’)
9 Low IF tuner concept
9 Digital Platform (DVB-T/T2, DVB-C, ISDB-T & ATSC)
9 Analog platforms (PAL B/G/I/D/K, NTSC M & SECAM L/L’)
9 Low IF tuner concept
1. TUNER (TU3)
19
LC-22DV240
LC-22DS240
LC-22DS240
9 Programmable channel Filter bandwidth
9 Fully I2C bus controlled
9 For Hybrid TV applications
9 Fully I2C bus controlled
9 For Hybrid TV applications
---
Pinning Table
and Application Block Diagram of Tuner---
20
LC-22DV240
LC-22DS240
LC-22DS240
2.1. General Description
17MB62 uses two 2,5W Class D Mono Audio Amplifers for from 16” to 24” TVs.
$=$'% LV D :DWWV PD[ FDQ RIIHU :DWWV # / RDG ȍ7+'
$=$'% LV D :DWWV PD[ FDQ RIIHU :DWWV # / RDG ȍ7+'
AVdd=DVdd=5.5Volt)with high efficiency filter-free class-D audio power amplifier in a
1613 mm x 1613 mm wafer chip scale package (WCSP). AZAD2102B uses Current-
switch technology to achieve high performance class-d amplifier that features 0.03%
THD, 85% efficiency, –70 dB PSRR, to improve RF-rectification immunity.
1613 mm x 1613 mm wafer chip scale package (WCSP). AZAD2102B uses Current-
switch technology to achieve high performance class-d amplifier that features 0.03%
THD, 85% efficiency, –70 dB PSRR, to improve RF-rectification immunity.
AZAD2102B provide a Vibration-Spectrum modulation clock for PWM Output. This
vibration frequency is around 10KHZ shift (+/- 5KHZ of Fpwm).
vibration frequency is around 10KHZ shift (+/- 5KHZ of Fpwm).
The advantage of the small size package (WCSP) makes AZAD2102B very suitable for
mobile phone and PDA device application. And the Class-D amplifier structure let
AZAD2102B to have highly efficiency power consumption than Class-AB amplifier.
AZAD2102B can shrink the application board, reduce system cost, and external
components.
mobile phone and PDA device application. And the Class-D amplifier structure let
AZAD2102B to have highly efficiency power consumption than Class-AB amplifier.
AZAD2102B can shrink the application board, reduce system cost, and external
components.
ESD level protection I/O embedded in AZAD2102B. For general applications, doesn’t
need to add extra ESD protection device (like Varistors) in application system for
AZAD2102B’s I/O.
need to add extra ESD protection device (like Varistors) in application system for
AZAD2102B’s I/O.
2.2. Features
x
CMOS Technology
x
High Efficiency 85%
x
High PSRR 70dB at 217Hz
x
Differential OP-amp Input
x
AZAD2102B provides Vibration-Spectrum Modulation clock for reduce EMI
x
Provide Mute function(set Mute_B to GND will go into Mute status)
x
For the input stage AZAD2102B built-in a 10Kohm resistors (Gain setting=29.5dB)
x
Maximum Battery Life and Minimum Heat
x
Efficiency With an 8-ȍ6SHDNHU
x
3.5 mA Quiescent Current
x
Output Power at 10% THD
x
:DWWVDW$9 GG '9 GG 9 RO
W5O
RDG ȍ
x
:DWWVDW$9 GG '9 GG 9 RO
W5O
RDG ȍ
x
:DWWVDW$9 GG '9 GG 9 RO
W5O
RDG ȍ
x
:DWWVDW$9 GG '9 GG 9 RO
W5O
RDG ȍ
x
:DWWVDW$9 GG '9 GG 9 RO
W5O
RDG ȍ
x
0.41Watts at AVdd=DVdd=3.0Volt, 5ORDG ȍ
x
Eliminate Power on and Power-off “Pop” noise
x
A Fewer External Components
x
Optimized PWM Output Stage Eliminates LC Output Filter
x
Internally generate 290 kHz Switching Frequency to eliminate Capacitor and
Resistor
Resistor
x
Improve PSRR (–70 dB) and Wide Supply Voltage (3.0 V to 5.5 V)
x
Fully Differential Design Reduces RF Rectification
x
This chip has been built-in a very strong ESD protection.
x
System level ESD 4KV (IEC 61000-4-2 ESD Contact Level)
x
Wafer Chip Scale Package (WCSP)
x
TSSOP Package with Exposed Pad
2. AUDIO AMPLIFIER STAGE WITH AZAD2102(U168)
Click on the first or last page to see other LC-22DS240K service manuals if exist.