Sharp LC-20S5E (serv.man4) User Manual / Operation Manual ▷ View online
7
AUDIO OUT
PC TERMINAL
EXT1
EXT3
EXT2
Connecting External Devices
Terminals
You can enjoy picture and sound by connecting devices, such as a VCR or
home video game system, to the terminals located on the rear of the LCD
TV set.
When connecting an external device, turn off the power of the LCD TV set
first to prevent any possible damage.
NOTE
The cables marked with * are commercially available items.
For more information about external device connections, see the operation manuals of your external devices.
Make sure that the corresponding cables are connected to each terminal. Connecting other cables may result in a malfunction.
EXT3 has two terminals, VIDEO and S-VIDEO terminals. If your external device has an S-VIDEO terminal, S-VIDEO connection is
recommended. S-VIDEO provides a finer, more detailed picture. If both terminals are connected, S-VIDEO terminal takes a priority.
The PC input terminals are DDC1/2B-compatible.
Refer to page 15 for a list of PC signals compatible with the TV.
Macintosh adaptor may be required for use for some Macintosh computers.
When connecting to a PC, the correct input signal type is automatically detected.
•
•
•
•
•
•
•
•
S-Video
Audio/Video cable*
S-Video Cable*
VIDEO
AUDIO (L)
AUDIO (R)
Video
Audio (L)
Audio (R)
Audio (L)
Audio (R)
To EXT terminal
<Example>
VCR
DVD Player
To EXT2 terminal
<Example>
Decoder
To PC terminal
ø 3.5 mm
stereo
minijack
cable*
RGB
cable*
RGB/DVI
conversion
cable*
<Example>
DVD Player
VCR
Camcorder
Home video game system
To EXT3 terminal
2-pin
Euro-SCART
connector*
2-pin
Euro-SCART
connector*
Audio (L/R)
S-VIDEO
Audio
cable*
To AUDIO OUT terminal
5-pin mini D-sub
AUDIO (L/R) mini
RS-232C
AUDIO OUT (L)
AUDIO OUT (R)
Antenna terminal
AV (2-pin
Euro-SCART)
RGB (2-pin
Euro-SCART)
<Example>
Audio amplifier
<Example>
Personal Computer
8
: S e l e c t
O K
: E n t e r
MENU
: B a c k
END
: E x i t
First Installation
When you turn on the LCD TV set for the first time, the
First Installation routine, which makes installation easier, is
activated. Using this routine, you can select the on-screen
display language and automatically search for and store all
the receivable TV channels.
NOTE
You can also execute the First Installation routine by selecting “First
installation” on the Setup Menu screen.
For selecting the menu items, see the right column.
Press (MAIN POWER) on the LCD TV set.
The “First installation” screen with a list of the languages for the
on-screen display is displayed.
2
Press ▲/▼/◀/▶ to select the desired language, and press
OK.
English
Russian
Español
Português
Deutsch
Türkçe
Français
Greek
Italiano
Suomi
Svenska
Polski
Nederlands
3
Press ▲/▼ to select the desired item, and press ◀/▶ to make
the setting.
NOTE
You can change “Colour system” and “Sound system” only
when “Other count.” is selected in “Country”.
4
Press ▲/▼ to select “Start search”, and press OK.
The automatic programme search begins.
5
Press END to exit.
NOTE
After the First installation routine, you can change the settings of
“Language” (page 11), and perform “Automatic search” (page 12)
again.
•
•
•
•
•
Basic Operation
Selecting Menu Items
The menus can be used to adjust the various settings of your
LCD TV set.
For details on setting each menu item, refer to the page
number indicated below.
NOTE
The illustrations and on-screen displays in this manual are for
explanation purposes and may vary slightly from the actual
appearance.
“Programmes” or “First installation” cannot be set when the EXT1,
EXT2, EXT3 or PC mode is selected as an input mode.
Settings most recently adjusted will be saved in memory.
■ Using the remote control
Press MENU to display the Menu screen.
2
Press ◀/▶ to select the desired menu item.
The cursor moves left or right.
The cursor indicates the selected menu item.
3
Press ▲/▼ to select the desired item, and press ◀/▶ to adjust
the selected item.
4
Press MENU to return to the previous screen or END to return
to the normal screen.
•
•
•
•
•
The bar below is an operational guide for the remote
control. The bar will change in accordance with each
menu setting screen.
AV mode
[ DYNAMIC ]
Backlight [ Bright ]
Contrast [ 50 ] ‒ +
Brightness [ 0 ] ‒ +
Colour
[ +4 ] ‒ +
Tint
[ 0 ]
Sharpness [ +2 ] ‒ +
Black
Film mode
DNR
Colour temp.
Reset
Picture
9
9
9
9
9
9
Page
9
9
9
9
9
9
Page
9
9
9
10
10
10
10
9
Page
12
8
13
11
11
Page
13
13
13
13
13
Programmes
First installation
Wide mode
EXT connections
Language
Setup
Treble [ 0 ] ‒ +
Bass [ 0 ] ‒ +
Balance [ 0 ] L R
Loudsp. sound
Auto vol.
Clear voice
Sound wide
Reset
Sound
Power management
Sleep timer
Auto power off
Blue screen
Child lock
Features
Country Germany
Colour system
PAL
Sound system
B/G
Start search
9
Selected Item
Description
Contrast
To adjust the contrast of PC Monitor screen.
Brightness
To adjust the brightness of PC Monitor screen.
V-Pos.
To adjust the vertical position of the image on
the PC Monitor screen. Each video standard will
require a different value for this setting.
H-Pos.
To adjust the horizontal position of the image on
the PC Monitor screen. Each video standard will
require a different value for this setting.
Clock
To minimize any vertical bars or stripes visible on
the screen background.
Phase
This must be adjusted after the frequency has
been set optimize picture quality.
Useful Features
Picture Adjustments
Adjust the picture to suit your preference. See the table below
for the adjustment items.
Press MENU to display the Menu screen.
2
Press ◀/▶ to select “Picture”.
3
Press ▲/▼ to select a specific adjustment item.
4
Press ◀/▶ to adjust the item to your desired position, and
press END to exit.
Adjustment items for AV source
Selected item
◀ button
▶ button
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour intensity For more colour
intensity
Tint
Skin tones become
purplish.
Skin tones become
greenish.
Sharpness
For less sharpness
For more sharpness
Adjustment items for PC source
Sound Adjustments
Adjust the sound quality and volume to suit your preference.
See the table below for the adjustment items.
Press MENU to display the Menu screen.
2
Press ◀/▶ to select “Sound”.
3
Press ▲/▼ to select a specific adjustment item.
4
Press ◀/▶ to adjust the item to your desired position, and
press END to exit.
Selected item
◀ button
▶ button
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker.
Decrease audio from
the left speaker.
NOTE
For the picture and sound adjustments
When resetting all adjustment items to factory preset values,
perform the following procedure.
①
Press ▲/▼ to select “Reset”, and press OK.
②
Press ▲/▼ to select “Yes”, and press OK.
•
Picture Mode Settings
You can make various picture mode settings.
Perform steps and 2 in Picture Adjustments to display the
Picture Menu screen.
2
Press ▲/▼ to select the desired item, and press OK.
3
Press ▲/▼ to select the picture mode, and press OK.
4
Press END to exit.
Selected items
Choice
Description
AV mode
DYNAMIC
For a clear-cut image
emphasising high contrast for
sports viewing.
STANDARD
For a highly defined image in a
normally bright room.
SOFT
Creates a softer image.
ECO
Reduces power consumption.
USER
Allows the user to customise
settings as desired. You can set
the mode for each input source.
Backlight*
1
Adjust the screen brightness.
Bright
Bright
Maximum brightness.
Medium
Suitable for viewing in well-lit
areas. Saves energy.
Dark
Sufficiently bright when viewing
in dim areas.
Black
On
For easier viewing, change the
viewing depth by selecting a
level for automatically adjusting
the dark portion of an image.
Off
Film mode
On
Automatically detect a film-
based source (originally
encoded at 24/25 frames/
second, depending on the
vertical frequency), analyses
it then recreates each still film
frame for high-definition picture
quality.
Off
DNR
High
Produce a clearer image.
Middle
Low
Off
Low
Off
Colour temp.*
2
Adjust the colour temperature to give the best
white image.
High
High
White with bluish tone
Middle
Natural tone
Low
White with reddish tone
*
1
Direct setting can be made with BACKLIGHT of the remote control.
*
2
Colour temp. setting also can be made in PC mode.
Bright
Medium
Dark
0
Useful Features (continued)
Sound Mode Settings
You can make various sound mode settings.
Perform steps and 2 in Sound Adjustments to display the
Sound Menu screen.
2
Press ▲/▼ to select the desired item, and press OK.
3
Press ▲/▼ to select the sound mode, and press OK.
4
Press END to exit.
Selected item
Choice
Loudsp. sound Stereo
Mono
Sound 1
Sound 2
Sound 1+2
Mono
Nicam
Mono
Mono
Auto vol.
On
Off
Clear voice
On
Off
Sound wide
On (For increasing the spread of the sound)
Off
NOTE
For the “Loudsp. sound” setting
The sound output modes differ depending on whether or not a
NICAM or A2 stereo signal is received. See “NICAM and A2 Stereo
Broadcast Selection” below.
For the “Auto vol.” setting
Different sound sources, fairly often do not have the same volume
level, for example the changing from movie to the advertisements.
The Automatic Volume Control (Auto vol.) solves this problem and
equalises the volume levels.
For the “Clear voice” setting
This function emphasises speech voice against the background
noise for more intelligibility. It is not recommended for music
sources.
NICAM and A2 Stereo Broadcast Selection
This enables the selection of the reception mode when
receiving a NICAM-I, NICAM-B/G or an A2 stereo signal. To let
you enjoy NICAM or A2 stereo broadcasting, this LCD TV set
receives NICAM stereo system, A2 stereo system, bilingual,
and monaural broadcasts.
Each time you press
(Sound), the mode changes as
follows:
Broadcast
Stereo*
Bilingual
Monaural
NICAM
Mono
Stereo
Sound 2
Sound 1+2
Mono
Sound 1
Mono
Nicam
A2 Stereo
Mono
Stereo
Sound 2
Sound 1+2
Mono
Sound 1
–
* When “Mono” is selected, the TV sound is output monaurally.
NOTE
If the button is not pressed for a few seconds, the mode setting is
automatically terminated and the LCD TV set returns to the normal
mode.
•
•
•
•
Click on the first or last page to see other LC-20S5E (serv.man4) service manuals if exist.