DOWNLOAD Sharp LC-20AD5E Service Manual ↓ Size: 4.28 MB | Pages: 86 in PDF or view online for FREE

JG203

APJG203000

MICON PROGRAM
JIG KIT 25-4

Up-Date of the VCTP DATA.

EU LCD MICON VER
UP ROM DISC

APJG176133

JG176

Connect the set to personal computer.

JG176

JG212
JG204

JG203  MICON PROGRAM JIG KIT
            25-4

1.

2.

Set the MICON UPDATE TOOL DISC (JG204) to PC.

Install the LPT driver.

Re-boot the PC.

Install the “Setup_Visual_I2C_v3-2-3b8h.exe”, “Setup_VI2C_for_VCT_Pro_v0101.exe” and “Winupload 4.4.3.exe”.

3.

4.

It is necessary to install according to the PC.
Windows 95/98 : Setup_LptDrv_v0104_9x.exe
Windows 2000/XP : Setup_LptDrvDev_v020201_XP_2000.exe
Windows NT : Setup_LptDrv_v0104_NT.exe

JG204

APJG204000

MICON UPDATE TOOL
DISC

There is WRITING TOOLS in Disc.

Up-Date of the Digital Soft Firmware.

APJG176130

JG176

DTV ROM DISC

JG201

APJG201000

Serial Communication
Change JIG

Connect the set to personal computer.

Up-Date of the EEPROM DATA.

APJG212003

JG212

EEP ROM DISC

EU LCD MICON VER UP
ROM DISC
DTV ROM DISC
EEPROM DISC
MICON UPDATE TOOL DISC

JG201 Serial Communication

Change JIG

Insert the AC cord, turn on the power.

Press both VOLUME DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
Confirm that displayed software version.

Set the Standby mode.

Set the DTV ROM DISC(JG176) to PC.

3.

4.

5.

6.

Serial Communication Change JIG(JG201)

RS232 Cable

TO PC

Before UPDATE the Digital Soft Firmware, it is necessary to install the WRITING TOOLS into the PC.
For the installation of WRITING TOOL, refer to the "INSTALL FOR WRITING TOOLS".

Unplug the AC cord, and remove the back cabinet.

Using the Serial Communication Change JIG (JG201) and RS232 Cable, connect the PC terminal and UART
Connector(CP2402) on the MAIN PCB.

1.

2.

Connect it in order of  MAIN PCB       Serial Communication Change JIG(JG201)        RS232 Cable        PC.

TO MAIN PCB

UART Connector(CP2402)

MAIN PCB

7. Start the "Winupload"(Writing tool).

8. Select the "Port Setting" from Process menu, then please set it as follows.

NOTE: This step is not necessary from next time.

Unplug the AC cord on the set, then plug it in again.

Turn on the power.
The following window will appear, Up-date for Software will start.
"Uploading inprogress" bar will begin to move.

Select the "Connect" from File menu.

Select the "Upload" from Process menu, and select the Software(CB00C74021.urt) in DTV ROM DISC(JG176).

9.

10.

11.

12.