DOWNLOAD Sharp LC-19SH7E Service Manual ↓ Size: 20.71 MB | Pages: 127 in PDF or view online for FREE

         2008-03-14 

LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU 

 5 

 

Press to turn the LCD TV on or enter standby mode. 

Select an input source. 

To select a TV channel directly. 

Press this button to display electronic program guide 
in DTV mode. 

To display the previous selected TV channel. 

Press this button you could select HDMI (19”) / 
HDMI 1(26”, 32”) / HDMI 2 (26”, 32”) / HDMI 3 (32”). 

Press this button you could select YPbPr. 

Press this button you could select AV / SCART 1 
/SCART 2 (26”, 32”) 

Press to direct to the PC mode. 

Press to adjust the volume. 

 

Press to toggle audio on and off. You can also press 
Vol (+/-) to restore the previous volume level. 

 (Picture format) 

Select picture format to Auto / Normal / Zoom 1/ Zoom 
2 / Wide. 

Press to select the channel. 

Select MONO, STEREO, DUAL 1 and DUAL 2 for 
ATV channel. Select Audio language for DTV channel. 

Press to set the LCD TV to a predefined sound setting. 
Personal / Music / Speech 

Press to set the LCD TV to a predefined picture 
setting. Personal / Standard / Vivid / Movie / Eco 

Press to turn the LCD TV off within an amount of time. 
(10 ~ 120 minutes.) 

∧ ∨

＜＞

Press ∧∨＜＞ to navigate and confirm your selection. 

Press to activate a setting. 

Press to activate the LCD TV OSD. Press again to exit 
the LCD TV OSD. 

 

Display programme infomation, if available. 

Press this button to activate Teletext. Press again to 
turn off Teletext. 

Press this button to activate Teletext with TV. 

Press this button to change the font size: Full screen, 
Top half and Bottom half. 

To select the subpage when the current page contains 
subpage(s).  

Press this button to return to page 100 or the index 
page; and then press 0 to 9. The teletext page will be 
numbered and added to the page you select or the 
secondary item. 

For DTV, press it to select subtitle setting. 
Off / On / On during mute 
For ATV, please activate Teletext to select subtitle 
page. 

Press this button to stop the scrolling of pages. 
The text decoder stops receiving data. 

Reveal hidden information such as answers to a quiz. 

Press buttons to set the picture with less brightness for 
saving energy. 

Press to display a list of channels. Then press Red 
button to select the Digital or Analogue channel list. 

Set the still image. Press again to return to normal 
screen. 

Press buttons to select the pictures with various 
colours of text. Different channels display different 
functions. 
When you are viewing the channel list, press R button 
can go to the previous page, and press G can go to 
the next page. 

LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU 

6  

 

 

 

 

 

 

         2008-03-14 

LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU 

 7 

 

Put the TV face down on a safe surface  

that is covered by a soft and smooth cloth. 

2.     Adjust the TV stand to the bottom of the TV.

 

3.     Fasten 4 screws by using a cross-head screwdriver. (Not supplied). 

 

To detach the TV stand, perform the steps in reverse order. 

 

 

TV screen size 
( inches) 

VESA-compatible wall bracket 
(millimeters) (W x H) 

Screw type 

19” 

100 x 100 mm 

Metric 4 x 10 mm 

26” 

200 x 100 mm 

Metric 4 x 10 mm 

 

32” 

200 x 200 mm 

Metric 6 x 10 mm 

 

 

 

 

 

. 

 

LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU 

8  

preparation 

 

 

1. 

insert two AAA batteries into Remote control. 
Make sure (+) and (-) are facing the proper  
direction. 

2.      Replace the cover. 
 

NOTE 
•  If the remote control will not to be used for a long 

time, remove the batteries to avoid remote control damage. 

CAUTION 

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. 
• Do not mix batteries of different types. Different types of batteries have different characteristics. 
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause 

chemical leakage in old batteries. 

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find 

any chemical leakage, wipe thoroughly with a cloth. 

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions. 
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it. 

Note on disposing batteries: 

The batteries provided contain no harmful materials such as cadmium, lead or mercury. 
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household 
Rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial 
Businesses. 

 
 

 

Use the remote control unit by pointing it towards the  
remote control sensor. Objects between the remote  
control unit and sensor may prevent proper operation.